Tag Archives: Conveyor Chain And Sprocket

China Best Sales High-Precision Processing Customization Large Pitch Carbon Steel Conveyor Roller Chain Industrial Driving and Driven Chain Wheel and Sprocket

Product Description

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

INSTALLATION AND USING

The chain wheel, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.
Certificates

Service Market:

Company Files

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

wheel sprocket

Compatibility of Chain Sprockets with Wheels

In general, chain sprockets are designed to work with specific types of wheels, and there are certain requirements for ensuring proper compatibility:

  • Chain Size and Pitch: The chain sprocket must match the size and pitch of the chain it is intended to work with. For example, if you have a roller chain with a pitch of 0.625 inches, you need a sprocket with the same pitch to ensure a proper fit.
  • Number of Teeth: The number of teeth on the sprocket should be compatible with the number of chain links. The chain should mesh smoothly with the sprocket without any binding or skipping.
  • Tooth Profile: The tooth profile of the sprocket should match the shape of the chain’s rollers to ensure smooth engagement and minimize wear.
  • Shaft Size: The center hole (bore) of the sprocket should match the diameter of the shaft it will be mounted on. Using the correct shaft size ensures a secure fit and prevents wobbling.
  • Hub Configuration: Some sprockets have hubs, which are extensions on either side of the sprocket. The hub’s length and configuration should match the requirements of the specific application.
  • Material and Strength: Consider the material and strength of the sprocket based on the application’s load and environmental conditions. Heavy-duty applications may require sprockets made of robust materials to withstand the forces and stresses.

It’s crucial to follow the manufacturer’s specifications and guidelines when selecting a chain sprocket for a particular wheel. Mixing incompatible sprockets and wheels can result in premature wear, inefficiencies, and potential safety hazards. If you are unsure about the compatibility, consult with the manufacturer or a knowledgeable expert to ensure you choose the right sprocket for your specific application.

wheel sprocket

Vertical Power Transmission with wheel sprocket System

Yes, a wheel sprocket system can be used for vertical power transmission. In such cases, the system is designed to transmit power and motion between vertically aligned shafts. Vertical power transmission using a wheel sprocket assembly follows similar principles to horizontal transmission, but there are some factors to consider:

  1. Load and Torque: When transmitting power vertically, the weight of the load can significantly impact the torque requirements. The torque must be sufficient to lift the load against gravity while accounting for friction and other resistive forces.
  2. Sprocket Selection: Choosing the right sprocket is critical for vertical transmission. The sprocket teeth must be designed to engage the chain or belt effectively and prevent slipping, especially when lifting heavy loads.
  3. Lubrication: Proper lubrication is essential to reduce friction and wear in the system. Vertical applications may require specific lubricants to ensure smooth operation and prevent premature failure.
  4. Tensioning: Maintaining the correct tension in the chain or belt is crucial for vertical power transmission. Proper tension helps prevent sagging and ensures proper engagement between the wheel sprocket.
  5. Overhung Load: In vertical setups, the weight of the sprocket and shaft assembly can impose an overhung load on the bearings. Adequate support and bearing selection are necessary to handle this load.

Vertical power transmission with a wheel sprocket system is commonly used in various applications, including conveyor systems, elevators, and some industrial machinery. Proper design, installation, and maintenance are essential to ensure safe and efficient operation in vertical configurations.

wheel sprocket

Role of a wheel sprocket in a Mechanical System

In a mechanical system, a wheel sprocket play a crucial role in transferring motion and power from one component to another. They are essential elements of various machines and mechanisms, such as bicycles, conveyor systems, automobiles, and industrial machinery. Let’s explore their functions in more detail:

1. Wheel:

The wheel is a circular component with a central shaft (axle) that allows it to rotate freely around the axle’s axis. Its primary functions include:

  • Motion Transmission: When a force is applied to the wheel’s outer edge, it rotates around the axle, enabling the transfer of linear motion into rotational motion.
  • Load Bearing: The wheel’s structure and material are designed to support and distribute the load placed on it, allowing smooth movement over various surfaces.
  • Reduction of Friction: By using wheels, the friction between the moving object and the ground is significantly reduced, making it easier to move heavy loads with less effort.
  • Directional Control: Wheels can be attached to steering mechanisms to control the direction of movement in vehicles and other equipment.

2. Sprocket:

A sprocket is a toothed wheel designed to mesh with a chain or a belt, facilitating motion transfer between the sprocket and the chain/belt. Its key functions include:

  • Power Transmission: When rotational force (torque) is applied to the sprocket, the teeth engage with the links of the chain or belt, transferring motion and power from one sprocket to another.
  • Speed and Torque Conversion: Different-sized sprockets can be used to adjust the speed and torque of the driven component in a mechanical system.
  • Positive Drive: The teeth on the sprocket and the links on the chain/belt create a positive drive system, reducing the likelihood of slippage or loss of power during operation.
  • Chain/Belt Tensioning: Sprockets help maintain proper tension in the chain or belt, ensuring optimal performance and longevity of the power transmission system.

Together, wheels and sprockets form a vital part of mechanical systems, enabling efficient motion transmission, power transfer, and control in a wide range of applications across various industries.

China Best Sales High-Precision Processing Customization Large Pitch Carbon Steel Conveyor Roller Chain Industrial Driving and Driven Chain Wheel and Sprocket  China Best Sales High-Precision Processing Customization Large Pitch Carbon Steel Conveyor Roller Chain Industrial Driving and Driven Chain Wheel and Sprocket
editor by CX 2024-02-16

China Custom Chains Wheel Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains China High-Intensity Chain Gear and High Wear Resistance Chain Sprocket

Product Description

SPROCKET  5/8” X 3/8”  10B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

Notice: *welding hub

BASIC INFO.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

INSTALLATION AND USING

The chain  spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard, Nonstandard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear, Cut Gear
Toothed Portion Shape: Spur Gear
Material: 1045, Stainless Steel
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

wheel sprocket

Compatibility of Chain Sprockets with Wheels

In general, chain sprockets are designed to work with specific types of wheels, and there are certain requirements for ensuring proper compatibility:

  • Chain Size and Pitch: The chain sprocket must match the size and pitch of the chain it is intended to work with. For example, if you have a roller chain with a pitch of 0.625 inches, you need a sprocket with the same pitch to ensure a proper fit.
  • Number of Teeth: The number of teeth on the sprocket should be compatible with the number of chain links. The chain should mesh smoothly with the sprocket without any binding or skipping.
  • Tooth Profile: The tooth profile of the sprocket should match the shape of the chain’s rollers to ensure smooth engagement and minimize wear.
  • Shaft Size: The center hole (bore) of the sprocket should match the diameter of the shaft it will be mounted on. Using the correct shaft size ensures a secure fit and prevents wobbling.
  • Hub Configuration: Some sprockets have hubs, which are extensions on either side of the sprocket. The hub’s length and configuration should match the requirements of the specific application.
  • Material and Strength: Consider the material and strength of the sprocket based on the application’s load and environmental conditions. Heavy-duty applications may require sprockets made of robust materials to withstand the forces and stresses.

It’s crucial to follow the manufacturer’s specifications and guidelines when selecting a chain sprocket for a particular wheel. Mixing incompatible sprockets and wheels can result in premature wear, inefficiencies, and potential safety hazards. If you are unsure about the compatibility, consult with the manufacturer or a knowledgeable expert to ensure you choose the right sprocket for your specific application.

wheel sprocket

Using wheel sprocket Assembly in Robotics and Automation

Yes, wheel sprocket assemblies are commonly used in robotics and automation systems to transmit power and facilitate movement. These systems offer several advantages for robotic applications:

  • Efficiency: wheel sprocket assemblies provide efficient power transmission, ensuring smooth and precise movement of robotic components.
  • Compact Design: The compact nature of sprockets and wheels allows for space-saving designs, making them ideal for robotic applications where space is limited.
  • Precision: Sprockets and wheels with accurate teeth profiles provide precise motion control, crucial for robotics and automation tasks that require high levels of accuracy.
  • Low Noise: Properly lubricated and maintained wheel sprocket systems generate minimal noise during operation, contributing to quieter robotic movements.
  • Customizability: wheel sprocket assemblies can be customized to suit specific robotic requirements, such as different gear ratios, sizes, and materials.
  • Multiple Configurations: Depending on the robotic application, different configurations like single or multiple sprockets, idler sprockets, or rack and pinion systems can be used.
  • High Load Capacity: Sprockets made from durable materials like steel can handle substantial loads, making them suitable for heavy-duty robotic tasks.

Examples of robotics and automation systems that commonly use wheel sprocket assemblies include:

  • Robotic Arms: wheel sprocket systems are utilized in robotic arms to control their movement and reach.
  • Automated Guided Vehicles (AGVs): AGVs use wheel sprocket assemblies for propulsion and steering, enabling them to navigate autonomously.
  • Conveyor Systems: In automated factories, conveyor belts are often driven by sprockets and wheels for efficient material handling.
  • Mobile Robots: Wheeled mobile robots use wheel sprocket assemblies to drive their wheels, enabling them to move in various directions.
  • Robot Grippers: wheel sprocket mechanisms can be integrated into robot grippers to facilitate gripping and handling objects.

The choice to use wheel sprocket assemblies in robotics and automation depends on the specific application requirements, load capacity, precision, and environmental conditions. By selecting the appropriate sprockets, wheels, and materials, engineers can ensure reliable and efficient robotic performance in a wide range of automated tasks.

wheel sprocket

Calculating Gear Ratio for a wheel sprocket Setup

In a wheel sprocket system, the gear ratio represents the relationship between the number of teeth on the sprocket and the number of teeth on the wheel. The gear ratio determines the speed and torque relationship between the two components. To calculate the gear ratio, use the following formula:

Gear Ratio = Number of Teeth on Sprocket ÷ Number of Teeth on Wheel

For example, if the sprocket has 20 teeth and the wheel has 60 teeth, the gear ratio would be:

Gear Ratio = 20 ÷ 60 = 1/3

The gear ratio can also be expressed as a decimal or percentage. In the above example, the gear ratio can be expressed as 0.3333 or 33.33%.

It’s important to note that the gear ratio affects the rotational speed and torque of the wheel sprocket. A gear ratio greater than 1 indicates that the sprocket’s speed is higher than the wheel’s speed, resulting in increased rotational speed and reduced torque at the wheel. Conversely, a gear ratio less than 1 indicates that the sprocket’s speed is lower than the wheel’s speed, resulting in decreased rotational speed and increased torque at the wheel.

The gear ratio is crucial in various applications where precise control of speed and torque is required, such as bicycles, automobiles, and industrial machinery.

China Custom Chains Wheel Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains China High-Intensity Chain Gear and High Wear Resistance Chain Sprocket  China Custom Chains Wheel Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains China High-Intensity Chain Gear and High Wear Resistance Chain Sprocket
editor by CX 2024-02-11

China Professional Conveyor Standard America, Kana, Europen, Roller Chain Stainless Steel Sprocket (35) did chain and sprocket kit

Product Description

Product Description

Product Discription:
1. DIN8187 ISO/R 606 and DIN8188 ISO/R606-ANSI B29.1.
2. Simplex / Duplex / Triplex / Multiple.
3.45C steel, Tooth Hardness.
5. Surface: Shot Blasting Natural/Black/Blue/ Nickel plate/ Zinc plate.

Product Advantages:
1. Good quality, surface of sprockets is smooth, shiny and beautiful.
2. Competitive price.
3. Prompt Delivery.
4. Green Product.
5. International Approval.
6. Experienced Staff.

 

Product Attribute

Standard Or Nonstandard

Standard

Application

Motorcycle, Machinery

Hardness

Hardened Tooth Surface

Manufacturing Method

Rolling Gear

Toothed Portion Shape

Spur Gear

Material

Stainless Steel

Type

Circular Gear

Port

ZheJiang

Payment

L/C, T/T, D/P, Paypal

Package

Ploywood

Detailed Photos

 

Product Parameters

 

Our Advantages

Company Advantages:
Own Import & Export License, The TV trade mark registered successfully in many countries, Sales network spread all over China, Products export to 65 countries in 5 continents.

Membership:
1. The member of China General Machine Components Industry Association.
2. The member of China Chain Transmission Association.
3. The member of China Chain Standardization Association.
4. The member of China Agricultural Association Machinery Manufacturers.

With our excellent trained staffs and workers, advanced and efficient equipments, completely sales network, strict QA systems. You are confidence that our premium qualified chain can meet all customers’ specification and strictest quality standards.

Please do not hesitate to contact us for more information on how TransVision products can meet your industries demands at highly competitive pricing.

Quality First, Clients Uppermost.

Product Categories

WHY CHOOSE US
Comprehensive Product Portfolio We produce and supply a wide range of power transmission
products including drive chains, leaf chains, conveyor chains, agricultural chains, sprockets, and
couplings. This one-store-for-all shopping experience will significantly reduce your searching costs while
guarantee youfind what you want at 1 click.

Value Choice Products Our products are the best combination of quality and price, and you get what
you want within your budgets

Seasoned Sales Associates and Engineers We have 15 seasoned sales associates and 5 engineers;
on our team at your disposal any time when you need a helping hand. They are well trained with industry
know-now and will always respond to your requests within 24 hours.
100% Customer Retention Rate Our regular customers from overseas come back not just for our
premium quality products, but for the superior services that we’ve provided over the years.

FAQ
Q1: What’s your average lead time?
A: It varies. Our regular end-to-end lead time is 1-2 months.. We also provide express shipments for rush orders. For details,please consult our sales associate.

Q2: Is your price better than your competitors given the same quality?
A: Definitely YES. We provide the most competitive price in the power transmission industry. If price disparity exists, we’ll be more than happy to do a price match.
Q3: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.

Q4: Can we inspect the goods before shipment?
A: Yes. You or your representative or any third-party inspection party assigned is allowed access to our facility and do the inspection.

Q5: What kind of payment method is acceptable for your mill?
A: We’re flexible. We take T/T, L/C, or any other online payment methods so long as it’s applicable for you.

Q6: What if I have any other questions?
A: Whenever in doubt, you’re always encouraged to consult our sales associate any time – They will help you to your satisfaction.

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Standard Or Nonstandard: Standard
Application: Machinery
Hardness: Hardened Tooth Surface
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

sprocket

How to choose a sprocket in CZPT

Sprocket is one of CZPT mechanical villagers. It can be found at levels 50, 55, 60 and 65. Like other mechanical villagers, it has a metallic texture and occasionally makes mechanical sounds when moving. It prefers green/orange and active/simple style colors.

Pitch sprocket

When choosing a pitch sprocket, you need to consider several factors, including the pitch diameter. This affects the torque applied to the shaft and the length of the moment arm. Additionally, incorrect pitch can affect belt life and wear. The pitch diameter should be measured by wrapping the belt around the sprocket at a 180-degree angle to the rod head. You can also consult engineering guidelines and product sheets to determine proper spacing.
The pitch diameter of a sprocket is the distance from the center of the pin to the next pin in the chain. The pitch diameter also determines the size of the sprocket teeth. The larger the pitch, the larger the teeth on the sprocket.
The diameter of the pitch sprocket depends on the type of bike. If you have an older bike, you should choose a sprocket with a diameter closer to the hub. If your bike has a smaller diameter rim, you can choose a sprocket with a smaller diameter and larger caliper. In addition to the caliper diameter, you should also consider the hub diameter.
Proper pitch sprockets can last longer. They are made with hardened teeth to increase their longevity and durability. You can choose between single-purpose and dual-purpose sprockets. Single-tooth sprockets have one tooth per pitch, while double-tooth sprockets have two teeth per pitch.
A pitch sprocket is a component of a bicycle chain. It prevents the chain from shaking due to uneven load distribution. Plus, it helps the chain stay tight.

three sprockets

Triple sprockets are toothed or cogwheels that move the chain. The pitch circle diameter of the triple sprocket is two and a half inches. Most rear sprockets are made of aluminum. The quality of the aluminum sheet used to make the sprocket varies from manufacturer to manufacturer. However, CZPT only uses the best aluminium sheets on the market. The sprockets are then shaped on a hobbing machine to ensure a perfect fit with the chain. The final anodizing process improves durability and adds personalization. The manufacturing process of CZPT is a quality control process with an uncompromising commitment to perfection.
sprocket

Cone lock sprocket

Taper lock sprockets are one of several types of sprockets. It has openings in flanges and tapers, making it ideal for a variety of applications. These sprockets also have the advantage of being easy to install and remove. These sprockets are also available in pre-drilled models that are pre-drilled to fit the shaft diameter. This allows for easier installation and improved alignment. Also, you can replace the sprockets without replacing the entire gear train.
These sprockets have flame hardened teeth for extended chain and sprocket life. They also help reduce drive noise. They are available in a variety of sizes, including duplex and triplex. In addition to being made of high-quality steel, they are also available in cast iron and metric models.

Quick release sprocket

There are several different styles of quick disconnect sprockets. Typically, they come with a 2″ hole and are compatible with various welds on the hub. The Quick Disconnect (QD) style is a special style with a split design on the hub and use of torque bolts to make it easier to install. This type of sprocket is very popular in the power transmission industry.
sprocket

Irregular sprocket

Idler gears are small gears that run on the chain. This sprocket can be used for a variety of purposes and is available in a variety of configurations. Its most common configuration is a ball bearing, pre-lubricated and sealed against moisture. Other idler sprockets have needle bearings, which are more stable and can handle higher capacities. Bronze bearings are another option as they have no moving parts.
China Professional Conveyor Standard America, Kana, Europen, Roller Chain Stainless Steel Sprocket (35)     did chain and sprocket kitChina Professional Conveyor Standard America, Kana, Europen, Roller Chain Stainless Steel Sprocket (35)     did chain and sprocket kit
editor by CX 2023-05-24

China Double Sprocket Roller for Double Chain Driving Roller Conveyor wheel and sprocket

Product Description

                              Single/ double row sprocket conveyor roller

 

Product Application

Gravity Roller (Light Duty Roller) is widely used in all kinds of industry, like manufacturing line, assembly line, packaging line,
conveyor machine and logistic strore.
 

Model
Roller Dia
Tube
Thickness
Shaft Dia
(mm)
Roller Length
 (mm)
Sprocket Tube Material Surface Treatment
SS38 T=1.2,1.5 φ 12 300-1000  
 
 
 
 
 
14 tooth*1/2” pitch according to customers’ requirement
 
 
 
 
 
 
Carbon Steel
Stainless Steel
PVC
 
 
 
 
 
 
Zinc Plated
Chrome Plated
SS42 T=2.0 φ12  300-1000
SS48 T=2.9 φ12 300-1000
SS50 T=1.2,1.5 φ12 300-1500
SS57 T=1.2,1.5 φ12/15 300-1500
SS60 T=1.5,2.0,3.0 φ12/15 300-1500
SS76 T=2.0,3.0 φ12/15/20 300-2000
SS80 T=3.0 φ20 300-2000
SS89 T=2.5,3.0 φ20 300-2000

 

 

                           

 

 


/ Piece
|
1 Piece

(Min. Order)

###

Material: Steel
Application: Chemical Industry, Grain Transportation, Mining Transport, Power Plant, Production Line
Structure: Ordinary Roller
Bearing Type: Double Sealed Bearing
Type: Parallel Conveyor Idler
Bearing: Precious Bearing

###

Customization:
Available

|


###

Model
Roller Dia
Tube
Thickness
Shaft Dia
(mm)
Roller Length
 (mm)
Sprocket Tube Material Surface Treatment
SS38 T=1.2,1.5 φ 12 300-1000  
 
 
 
 
 
14 tooth*1/2” pitch according to customers’ requirement
 
 
 
 
 
 
Carbon Steel
Stainless Steel
PVC
 
 
 
 
 
 
Zinc Plated
Chrome Plated
SS42 T=2.0 φ12  300-1000
SS48 T=2.9 φ12 300-1000
SS50 T=1.2,1.5 φ12 300-1500
SS57 T=1.2,1.5 φ12/15 300-1500
SS60 T=1.5,2.0,3.0 φ12/15 300-1500
SS76 T=2.0,3.0 φ12/15/20 300-2000
SS80 T=3.0 φ20 300-2000
SS89 T=2.5,3.0 φ20 300-2000

/ Piece
|
1 Piece

(Min. Order)

###

Material: Steel
Application: Chemical Industry, Grain Transportation, Mining Transport, Power Plant, Production Line
Structure: Ordinary Roller
Bearing Type: Double Sealed Bearing
Type: Parallel Conveyor Idler
Bearing: Precious Bearing

###

Customization:
Available

|


###

Model
Roller Dia
Tube
Thickness
Shaft Dia
(mm)
Roller Length
 (mm)
Sprocket Tube Material Surface Treatment
SS38 T=1.2,1.5 φ 12 300-1000  
 
 
 
 
 
14 tooth*1/2” pitch according to customers’ requirement
 
 
 
 
 
 
Carbon Steel
Stainless Steel
PVC
 
 
 
 
 
 
Zinc Plated
Chrome Plated
SS42 T=2.0 φ12  300-1000
SS48 T=2.9 φ12 300-1000
SS50 T=1.2,1.5 φ12 300-1500
SS57 T=1.2,1.5 φ12/15 300-1500
SS60 T=1.5,2.0,3.0 φ12/15 300-1500
SS76 T=2.0,3.0 φ12/15/20 300-2000
SS80 T=3.0 φ20 300-2000
SS89 T=2.5,3.0 φ20 300-2000

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
sprocket

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
sprocket

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
sprocket

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China Double Sprocket Roller for Double Chain Driving Roller Conveyor     wheel and sprocketChina Double Sprocket Roller for Double Chain Driving Roller Conveyor     wheel and sprocket
editor by CX2023-03-27

China Professional 80 Transmission For Conveyor And Small Rollers Roller Ball Sprocket Sprockets Chain Double with great price bike chain sprocket

Guarantee: NO
Relevant Industries: Manufacturing Plant, Machinery Mend Outlets, Power & Mining, Building performs
Customized support: OEM
Materials: Steel, C45# steel
Common: ISO
Item name: sprockets chain 80 double
Processing: Forging-Machining-Hobbing-Teeth harden-Tempering
Warmth therapy: Large Frequency Induction Hardening and tempering
Name: Professional Regular Sprocket in China
Surface therapy: As essential
Software: Transmission Equipment
Dimension: DIN8187/ISO606/DIN8188/ISO606
application: ogistics warehousing,garage,food Machinery,escalator and so on
Use: Indurstry
Certification: GS
Packaging Information: The sprockets are packed in plywood case lined with corrugated paperboard or carton box or according to customers’ need.
Port: ZheJiang ZheJiang

OverviewFast Particulars

Material:C45# Metal

Regular:ISO/KANA/ASA/MARTIN

Spot of Origin:ZheJiang , China

Item identify:
Specialist Regular Sprocket in China

Processing:Forging-Machining-Hobbing-Enamel harden-Tempering

Heat therapy:High Frequency Induction Hardening and tempering

Surface area treatment method:As essential

Software:Transmission Machine
Source Capacity:3000000 Piece/Parts for each Yr
Packaging DetailsThe sprockets are packed in plywood circumstance lined with corrugated paperboard or carton box or in accordance to customers’ necessity.

PortZheJiang or ZheJiang

Guide Time :30-45 times after progress payment (We have big inventory of some designs sprockets, if we have inventory, we can supply inside 7-15days)

Organization info:With a lot more than 20 years’ knowledge, higher-precision gear and rigid management technique, SSG can provide Industrial sprocket,motorbike chain wheel, OEM Manufacturing unit Personalized Large High quality Roller Chain Conveyor Chain Sprockets for Conveyor Belt equipment, flange, stamping parts, agricultural equipment areas, car parts, mechanical areas and associated transmission elements for you with steady top quality and greatest support.

Dimension: DIN8187/ISO606/DIN8188/ISO606Material: carbon metal,stainless steel,alloy C45# steelPackaging: The sprockets are packed in plywood case lined with corrugated paperboard or carton box or according to customers’ necessity.

Our modelSSG
Merchandisesprocket

Sprocket ContentC45# metal

Teeth8T-120T

Processingforging, hobbing, precision machining, heat treatment, floor remedy

Machining ToolsAir hammer//electric powered screw push, imported vertical and horizontal CNC lathe, imported machining heart, CNC tapping heart, Hot offering velocity variator pulley for tissue machine CNC hobbing machine, CNC cylindrical grinder , welding machines, vertical and horizontal hydraulic broaching equipment. automatic creation strains of substantial-power CNC warmth therapy.

Warmth TreatmentNormalizing/quenching and tempering/ carburizing and quenching/salt bathtub quenching/vacuum quenching/subzero treatment method/liquid nitriding/gas nitriding/carbonnitriding/ QPQ treatment method/high-frequency quenching.

Surface Treatment methodZinc plated, non-chromate dacromet treatment,chromium plated, black oxide therapy, phosphorization, anodic oxidation, nickel plated

softwarego over a extensive selection of sector like agriculture machinery, logistics warehousing,garage,food Machinery,escalator and so on.

packingthe sprocket are packed in plywood circumstance lined with corrugated paperboard or carton box or in accordance to buyers requirement.

Q1: What info will be hugely appreciated for a quotation?
A: It will be favored if you can supply us design identify or the drawings, warmth treatment and surface therapy needs, needed amount, APRILIA RX50 DERBI SENDA DRD X-TREME sprocket retainer lock plate Previous model M5 ST06111-0019 High Top quality quoted forex (USD or RMB), or samples.

Q2: Are you a buying and selling business or manufacturing facility?
A: SSG is a manufacturing facility located in HangZhou, ZheJiang

Q3: What is your conditions of payment?
A: T/T 50% in progress, and fifty% ahead of cargo. We’ll present you the photos of the goods and deals ahead of you pay out the balance.

Q4: Do you test all your merchandise ahead of supply?
A: Indeed, SSG has adopted a rigid good quality management method and all the items will be inspected according to the inspection instruction with good inspection documents.

Qfive: How do you make sure the higher quality of items?
A: With integral manufacturing procedures, a rigid top quality handle system and imported machines, we can manufacture higher top quality items.

Qsix: What are your phrases of delivery?
A: EXW, FOB ZheJiang or ZheJiang .

Qseven: How about your direct time?
A: Generally it will get 30-forty five days right after obtaining your advance payment. The certain direct time relies upon on the products and the amount of your get. We have huge stock of some versions sprockets, if we have stock, we can shipping inside of 7-15days.

Q8:T/T payment Least purchase amount:

d (Outdoors Diameter)
MOQ
d≤50mm
five hundred PCS
50mm<d≤150mm
two hundred PCS
150mm<d≤300mm
50 PCS
300mm< custom big size double chain sprocket for conveyor d≤500mm
thirty PCS

What you need to know about sprockets

If you are interested in bicycles or mechanical parts, you may be interested in learning more about Sprockets. There are several types to choose from, each with their own advantages and disadvantages. Here are some details about the different types. Among other things, you may want to consider their spacing, holes and teeth.
sprocket

Various types of sprockets

There are several types of sprockets, each with their own advantages and disadvantages. Generally, sprockets are selected based on their pitch, which is the distance from the center of the needle roller to the sprocket teeth. These two factors are often used together to determine the speed ratio. For example, a 50-tooth drive sprocket produces a 2:1 reduction ratio.
A sprocket is a wheel that meshes with a chain or track to drive the machine. They are different from gears and are usually designed for a specific chain. Choosing the correct type of sprocket will ensure proper performance and minimize maintenance. The accompanying catalog provides specifications for each sprocket.
Sprockets come in many different designs. These include common bores and roller chains. They also have taper and split taper designs. They can also be made to order. Additionally, these sprockets are available with different mounting options. If you’re looking for a chain, you’ll also need to consider size and spacing.
Sprockets are often used in power transmission systems. They are used with roller chains and silent chains. They reduce speed in a similar way to gears. However, sprockets are designed with high friction surfaces that will wear out quickly unless lubricated. This is why sprockets are usually made of steel, although they can also be made of plastic.
The most common type of sprocket is the roller sprocket. This type of sprocket is commonly used in drivetrains because it runs on a series of pins and rollers that create play between the teeth of the sprocket. They have high tensile strength and are usually made of cast iron or graded stainless steel.
Another type of sprocket is the engineered sprocket, which is stronger and more durable than power transmission sprockets. They are also designed to replace worn teeth without removing the conveyor chain. So if you’re planning to buy a new sprocket, read the manual carefully and make sure you choose the one that best meets your needs.
Different types of sprockets have different pitches and sprocket lengths. For example, chains with large pitch diameters require sprockets with large teeth. Conversely, a chain with a shorter pitch will require smaller sprockets and smaller teeth. Likewise, the pitch of the sprocket and its bore also affects the size of the drive shaft. Knowing the diameter of the drive shaft before buying will ensure you choose the correct sprocket for the job at hand.
sprocket

teeth

There are many factors that determine the length and shape of a sprocket. The number of teeth on the sprocket is a consideration. The higher the number of teeth, the longer the life of the sprocket. Also, the higher the number, the better the wear resistance of the sprocket. Most sprockets have 17 teeth, but they can have more or less. Choosing the correct number of teeth for a sprocket will greatly increase the life of the sprocket and chain. The teeth are usually made of the same material as the sprockets, but there are some removable options as well. Another option is to harden the teeth of the sprocket, which will greatly increase the life of the sprocket. This process is often called induction hardening
While sprockets are sometimes made of metal, some are made of plastic or reinforced plastic. The design of the sprocket is similar to the design of the gear, but it is completely different. While they both have a wheel-like shape, the only difference between them is how they interact with different types of chains. In most cases, the sprocket and chain work together, similar to a bicycle chain assembly.
To determine the correct sprocket size, you need to know the size of the drive shaft, which will determine the size of the teeth. For example, a chain with a 3.5 pitch diameter needs a chainring with large teeth, while a chainring with a smaller pitch needs a chainring with small teeth. Pitch diameter or teeth per inch and bore (the hole through which the center of the sprocket passes through the drive shaft) are the two most important factors in determining sprocket size.

Hole

Each spring has two diameters – the shaft diameter and the spring bore. These measurements are important for spring assemblies and cavities. They usually hold a certain tolerance, depending on the customer’s tolerance requirements. Spring manufacturers typically design clearances according to standard manufacturing practices and recommend keeping bore and shaft diameters within a certain tolerance type.
sprocket

asphalt

Pitch is a property of a peak frequency that reflects its relative position in frequency space. The spacing of spikes can be measured using a method called neural coding. During this process, CF builds and indexes a series of single-fiber models. Each model predicts the rate response of the AN to any stimulus. These models have no free parameters and are used to find the excitation parameters that produce the most similar measurement curves.
In the past, baseball pitchers used spiked curves to throw harder knives. This type of curveball is similar to a fastball, but with a sharper hit. The resulting speed allows pitchers to throw harder knives. While it’s not a traditional curveball, it can help pitchers improve their QOP score by reducing the time it takes to complete a pitch.
In addition to estimating the pitch, these studies show that the phase relationship between the three harmonics has little effect on the pitch estimation for the pooled interval distribution. This finding is consistent with psychophysical observations of pitch-phase invariance. However, the phase relationship between unresolved and resolved harmonics may have a greater effect on pitch saliency.

China Professional 80 Transmission For Conveyor And Small Rollers Roller Ball Sprocket Sprockets Chain Double with great price     bike chain sprocketChina Professional 80 Transmission For Conveyor And Small Rollers Roller Ball Sprocket Sprockets Chain Double with great price     bike chain sprocket
editor by czh 2023-02-16

China Roller Chains and Bush Chains Conveyor Belt Parts Transmission Gearbox OEM ODM Casting Parts Chain Wheel, Sprocket Wheel with Best Sales

Item Description

SPROCKET  5/8” X 3/8”  10B Sequence SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C one.6mm
Tooth Width b1 9.0mm
Tooth Width B1 nine.1mm
Tooth Width B2 twenty five.5mm
Tooth Width B3 forty two.1mm
10B Collection ROLLER CHAINS  
Pitch fifteen.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47. forty one.48 twenty five 10 twenty five 25 twelve 40 twenty five 12 fifty five
9 52.six 46.42 thirty ten twenty five thirty 12 40 thirty twelve fifty five
10 fifty seven.5 fifty one.37 35 ten twenty five 35 twelve 40 35 12 fifty five
eleven 63. 56.34 37 12 thirty 39 14 forty 39 sixteen fifty five
12 sixty eight. sixty one.34 42 12 thirty 44 fourteen forty forty four 16 fifty five
13 73. 66.32 forty seven 12 30 forty nine 14 40 forty nine sixteen 55
fourteen seventy eight. seventy one.34 52 12 30 54 14 40 54 16 fifty five
fifteen 83. seventy six.36 fifty seven twelve 30 fifty nine fourteen 40 fifty nine sixteen fifty five
16 88. eighty one.37 60 12 30 sixty four 16 forty five 64 16 sixty
seventeen 93. 86.39 sixty twelve 30 sixty nine 16 45 sixty nine 16 60
eighteen 98.3 91.forty two 70 14 30 74 sixteen forty five seventy four 16 sixty
19 103.three 96.forty five 70 14 30 79 sixteen forty five seventy nine 16 60
20 108.four one zero one.49 75 14 thirty eighty four 16 45 eighty four 16 sixty
21 113.four 106.52 seventy five sixteen thirty 85 16 forty five eighty five twenty 60
22 118. 111.fifty five eighty 16 30 ninety sixteen forty five ninety twenty 60
23 123.five 116.fifty eight eighty 16 30 ninety five 16 forty five ninety five 20 sixty
24 128.3 121.sixty two eighty sixteen 30 a hundred 16 forty five a hundred 20 sixty
twenty five 134. 126.66 80 sixteen 30 105 sixteen forty five 105 twenty sixty
26 139. 131.70 85 20 35 a hundred and ten 20 forty five one hundred ten 20 60
27 one hundred forty four. 136.seventy five eighty five 20 35 a hundred and ten 20 forty five a hundred and ten twenty sixty
28 148.seven 141.78 90 20 35 one hundred fifteen 20 forty five one hundred fifteen 20 60
29 153.8 146.83 90 20 35 a hundred and fifteen twenty forty five 115 twenty sixty
thirty 158.8 151.87 90 20 35 a hundred and twenty twenty forty five 120 twenty 60
31 163.9 156.ninety two 95 twenty 35 a hundred and twenty twenty 45 a hundred and twenty 20 sixty
32 168.nine 161.ninety five ninety five twenty 35 120 twenty forty five a hundred and twenty twenty 60
33 174.5 167.00 95 20 35 a hundred and twenty 20 forty five 120 20 sixty
34 179. 172.05 ninety five twenty 35 a hundred and twenty 20 forty five 120 twenty 60
35 184.one 177.ten 95 twenty 35 120 20 45 a hundred and twenty twenty 60
36 189.one 182.15 a hundred twenty 35 one hundred twenty twenty forty five a hundred and twenty 25 60
37 194.two 187.20 a hundred twenty 35 120 twenty 45 a hundred and twenty 25 60
38 199.2 192.24 100 20 35 120 20 forty five a hundred and twenty 25 sixty
39 204.two 197.29 a hundred twenty 35 120 twenty 45 one hundred twenty 25 60
40 209.3 202.34 100 20 35 one hundred twenty twenty 45 a hundred and twenty twenty five 60
41 214.8 207.38 *one hundred twenty forty 120 20 fifty *130 twenty five sixty
forty two 2,199 212.forty three *one hundred twenty forty 120 twenty 50 *130 25 60
forty three 224.9 217.forty eight *one hundred twenty 40 a hundred and twenty 20 fifty *one hundred thirty 25 60
forty four 230. 222.53 *one hundred 20 forty a hundred and twenty twenty fifty *130 25 60
forty five 235. 227.58 *a hundred twenty forty *120 20 50 *one hundred thirty twenty five sixty
46 240.one 232.63 *one hundred twenty forty *one hundred twenty twenty fifty *130 twenty five sixty
47 245.one 237.sixty eight *one hundred 20 40 *120 twenty fifty *130 twenty five sixty
forty eight 250.2 242.seventy three *one hundred 20 forty *120 twenty fifty *130 25 sixty
49 255.2 247.78 *a hundred 20 forty *120 20 50 *130 25 60
50 260.three 252.eighty two *a hundred 20 40 *120 20 50 *130 twenty five 60
51 265.3 257.87 *100 20 forty *120 twenty 50 *one hundred thirty twenty five 60
52 270.4 262.ninety two *a hundred 20 forty *a hundred and twenty 20 50 *a hundred thirty twenty five 60
53 275.four 267.97 *one hundred twenty 40 *one hundred twenty twenty fifty *one hundred thirty twenty five sixty
54 280.five 273.03 *one hundred 20 40 *a hundred and twenty twenty 50 *a hundred thirty 25 sixty
fifty five 285.five 278.08 *a hundred twenty forty *a hundred and twenty 20 fifty *a hundred thirty twenty five sixty
fifty six 290.6 283.thirteen *a hundred 20 forty *a hundred and twenty twenty 50 *a hundred thirty twenty five 60
57 296. 288.18 *one hundred twenty 40 *a hundred and twenty 20 fifty *a hundred thirty 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 sixty four
59 305.seven 298.28 *a hundred twenty 43 *120 twenty fifty seven *130 25 64
60 310.8 303.33 *100 20 43 *a hundred and twenty twenty 57 *one hundred thirty twenty five 64
62 321.four 313.43 *one hundred twenty 43 *120 twenty fifty seven *130 twenty five sixty four
sixty four 331.5 323.fifty three *one hundred twenty forty three *a hundred and twenty twenty 57 *a hundred thirty 25 67
sixty five 336.five 328.fifty eight *100 twenty forty three *120 twenty fifty seven *a hundred thirty twenty five 67
sixty six 341.6 333.sixty four *100 twenty forty three *a hundred and twenty 20 57 *a hundred thirty twenty five sixty seven
sixty eight 351.seven 343.74 *one hundred twenty 43 *a hundred and twenty 20 fifty seven *a hundred thirty 25 sixty seven
70 361.8 353.84 *100 20 forty three *one hundred twenty 20 57 *130 25 67
seventy two 371.9 363.94 *a hundred 20 43 *120 twenty fifty seven *one hundred thirty twenty five sixty seven
75 387.one 379.10 *100 20 43 *one hundred twenty twenty 57 *a hundred thirty 25 67
seventy six 392.one 384.fifteen *one hundred twenty 43 *one hundred twenty twenty 57 *a hundred thirty 25 67
seventy eight 402.2 394.twenty five *one hundred 20 43 *120 twenty fifty seven *one hundred thirty 25 67
80 412.3 404.36 *a hundred 20 forty three *one hundred thirty twenty fifty seven *130 twenty five 67
85 437.six 429.62 *100 twenty fifty *a hundred thirty twenty 58 *130 twenty five 67
90 462.8 454.88 *one hundred 20 50 *one hundred thirty twenty 58 *130 25 sixty seven
95 488.five 480.14 *a hundred twenty 50 *130 twenty 58 *a hundred thirty 25 sixty seven
100 513.4 505.40 *a hundred 20 fifty *a hundred thirty twenty 58 *one hundred thirty 25 sixty seven
one hundred ten 563.nine 555.ninety two *one hundred twenty fifty *130 twenty fifty eight *a hundred thirty twenty five 67
114 584.1 576.thirteen *100 twenty 50 *a hundred thirty 20 fifty eight *130 25 sixty seven
a hundred and twenty 614.four 606.forty five *100 20 fifty *one hundred thirty twenty fifty eight *a hundred thirty 25 sixty seven
a hundred twenty five 639.seven 631.51 *one hundred twenty 50 *one hundred thirty 20 fifty eight *a hundred thirty 25 67

Observe: *welding hub

Standard Information.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, and many others
two. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface area Treatment method Heat treatment, Quenching treatment method, Large frequency normalizing therapy, Sharpening, Electrophoresis paint processing, Anodic oxidation therapy, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so forth
Style criterion ISO DIN ANSI & Customer Drawings
Dimension Client Drawings & ISO standard 
Application Industrial transmission gear
Bundle Picket Case / Container and pallet, or created-to-purchase
Certification ISO9001: 2008 
Gain Top quality very first, Services first, Aggressive cost, Quick delivery
Supply Time 20 times for samples. 45 days for official order.

Installation AND Using

The chain  spoket, as a travel or deflection for chains, has pockets to hold the chain links with a D-profile cross area with flat aspect surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain website link centre plane. The chain back links are pressed firmly from the outer surfaces and every of the aspect surfaces by the angled laying surfaces at the foundation of the pockets, and also the support surfaces of the wheel human body collectively with the stop sides of the webs fashioned by the major and trailing walls of the pocket.

Recognize

When fitting new chainwheels it is extremely critical that a new chain is equipped at the very same time, and vice versa. Using an old chain with new sprockets, or a new chain with outdated sprockets will trigger rapid use.

It is important if you are putting in the chainwheels by yourself to have the manufacturing facility service guide certain to your model. Our chainwheels are manufactured to be a immediate substitute for your OEM chainwheels and as this kind of, the installation ought to be performed according to your versions services guide.

During use a chain will stretch (i.e. the pins will put on creating extension of the chain). Employing a chain which has been stretched far more than the above optimum allowance brings about the chain to trip up the teeth of the sprocket. This leads to injury to the tips of the chainwheels teeth, as the power transmitted by the chain is transmitted fully by means of the prime of the tooth, instead than the complete tooth. This final results in significant sporting of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Specifications companies (such as ANSI and ISO) keep expectations for design, proportions, and interchangeability of transmission chains. For illustration, the following Desk exhibits information from ANSI regular B29.1-2011 (Precision Electrical power Transmission Roller Chains, Attachments, and Sprockets) created by the American Modern society of Mechanical Engineers (ASME). See the references[8][9][ten] for added information.

ASME/ANSI B29.1-2011 Roller Chain Common SizesSizePitchMaximum Roller DiameterMinimum Greatest Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Regular Dimensions
Measurement Pitch Greatest Roller Diameter Least Greatest Tensile Strength Measuring Load
25 .250 in (6.35 mm) .130 in (3.thirty mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.fifty three mm) .two hundred in (5.08 mm) one,760 lb (800 kg) 18 lb (8.2 kg)
forty one .five hundred in (twelve.70 mm) .306 in (7.77 mm) one,500 lb (680 kg) eighteen lb (8.2 kg)
forty .500 in (twelve.70 mm) .312 in (7.92 mm) three,one hundred twenty five lb (1,417 kg) 31 lb (14 kg)
fifty .625 in (15.88 mm) .400 in (10.sixteen mm) four,880 lb (2,210 kg) 49 lb (22 kg)
60 .750 in (19.05 mm) .469 in (11.ninety one mm) seven,030 lb (3,one hundred ninety kg) 70 lb (32 kg)
80 one.000 in (twenty five.forty mm) .625 in (15.88 mm) twelve,500 lb (5,700 kg) a hundred twenty five lb (fifty seven kg)
a hundred 1.250 in (31.seventy five mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
one hundred twenty 1.five hundred in (38.10 mm) .875 in (22.23 mm) 28,one hundred twenty five lb (twelve,757 kg) 281 lb (127 kg)
a hundred and forty 1.750 in (forty four.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
a hundred and sixty 2.000 in (50.80 mm) one.one hundred twenty five in (28.fifty eight mm) fifty,000 lb (23,000 kg) five hundred lb (230 kg)
a hundred and eighty 2.250 in (fifty seven.15 mm) 1.460 in (37.08 mm) sixty three,280 lb (28,seven hundred kg) 633 lb (287 kg)
two hundred 2.500 in (sixty three.50 mm) 1.562 in (39.sixty seven mm) 78,a hundred seventy five lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (seventy six.20 mm) 1.875 in (forty seven.sixty three mm) 112,five hundred lb (fifty one,000 kg) 1,000 lb (450 kg

For mnemonic functions, under is yet another presentation of key proportions from the identical common, expressed in fractions of an inch (which was portion of the contemplating powering the choice of chosen figures in the ANSI common):

Pitch (inches) Pitch expressed
in eighths
ANSI regular
chain amount
Width (inches)
14 twoeight two5 18
3eight three8 35 three16
1two 4eight four1 1four
one2 48 four five16
fiveeight five8 5 three8
threefour sixeight six one2
1 eight8 eight 5eight

Notes:
one. The pitch is the distance in between roller centers. The width is the distance in between the website link plates (i.e. marginally much more than the roller width to allow for clearance).
two. The proper-hand digit of the common denotes 0 = regular chain, 1 = lightweight chain, 5 = rollerless bushing chain.
three. The left-hand digit denotes the amount of eighths of an inch that make up the pitch.
four. An “H” pursuing the normal number denotes heavyweight chain. A hyphenated variety pursuing the standard variety denotes double-strand (2), triple-strand (3), and so on. Hence 60H-3 denotes quantity 60 heavyweight triple-strand chain.
 A common bicycle chain (for derailleur gears) utilizes narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load ability. The a lot more sprockets at the rear wheel (traditionally 3-6, today 7-twelve sprockets), the narrower the chain. Chains are bought in accordance to the number of speeds they are developed to perform with, for example, “ten speed chain”. Hub gear or single pace bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the greatest thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped backlinks have an even amount of backlinks, with every single narrow url adopted by a broad one. Chains built up with a uniform variety of website link, slim at 1 and broad at the other finish, can be manufactured with an odd variety of back links, which can be an benefit to adapt to a special chainwheel-length on the other aspect this sort of a chain tends to be not so powerful.

Roller chains created making use of ISO standard are at times called as isochains.

 

WHY Select US 

one. Reliable High quality Assurance Program
2. Slicing-Edge Pc-Controlled CNC Equipment
three. Bespoke Remedies from Highly Knowledgeable Experts
4. Customization and OEM Offered for Certain Application
5. Comprehensive Stock of Spare Parts and Add-ons
6. Well-Produced Around the world Marketing and advertising Network
seven. Effective Soon after-Sale Service System

 

The 219 sets of advanced automated creation gear supply ensures for large item good quality. The 167 engineers and specialists with senior skilled titles can design and create items to satisfy the precise calls for of buyers, and OEM customizations are also offered with us. Our sound worldwide support network can supply clients with timely right after-income technological companies.

We are not just a producer and supplier, but also an market expert. We work professional-actively with you to offer specialist suggestions and product tips in purchase to finish up with a most value efficient merchandise obtainable for your particular software. The consumers we provide throughout the world selection from conclude users to distributors and OEMs. Our OEM replacements can be substituted where ever essential and suitable for each restore and new assemblies.

 

 

US $9.7
/ Piece
|
3,000 Pieces

(Min. Order)

###

Standard Or Nonstandard: Nonstandard, Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear, Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Alloy Steel,

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

###

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58
US $9.7
/ Piece
|
3,000 Pieces

(Min. Order)

###

Standard Or Nonstandard: Nonstandard, Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear, Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Alloy Steel,

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

###

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
sprocket

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
sprocket

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
sprocket

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China Roller Chains and Bush Chains Conveyor Belt Parts Transmission Gearbox OEM ODM Casting Parts Chain Wheel, Sprocket Wheel     with Best Sales China Roller Chains and Bush Chains Conveyor Belt Parts Transmission Gearbox OEM ODM Casting Parts Chain Wheel, Sprocket Wheel     with Best Sales
editor by czh 2023-01-03

China Roller chain and sprocket manufacturer Transmission 41 riv roller chain China in Pietermaritzburg South Africa Conveyor Roller Chain with Special Attachment with ce certificate top quality low price

China Roller chain and sprocket manufacturer Transmission 41 riv roller chain China in Pietermaritzburg South Africa  Conveyor Roller Chain with Special Attachment with ce certificate top quality low price

We – EPG Team the largest Chain and agricultural gearbox factory in China with 5 diverse branches.

Our product variety also covers locking assemblies (clamping elements/locking unit), taper bushes, QD bushes, bolt-on hubs, pto shaft, agricultural gearboxes,torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod finishes and yokes. No Complete use has been made of all types of sophisticated techniques and technological innovation to get to excelsior production. other assortment of chains can conquer EPG for variety. In addition to standard roller chains of all sorts and dimensions, roller chains with attachments and double pitch roller chains, we also offer you special chains these kinds of as grip chains, accumulation chains, elastomeric profile chains, leaf chains, bushed conveyor chains, hollow pin chains and numerous other versions. Maintenance-totally free or corrosion-proof chains are available for particular purposes. Our pin oven chains and tube conveyor chains empower a broad assortment of solutions for the productive generation and optimum conveying of cans and tubes. Find out far more about our solution manufacturing unit of roller chains. Conveyor chains, engineered chains, silent chains, and tabletop chains are also available. Other energy transmission products contain pillow blocks, conveyor idlers, conveyor pulleys, generate shafts, equipment racks, equipment reducers, gears, overrunning clutches, motor bases, pulleys, screw conveyors, shaft couplings, sheaves, velocity reducers, sprockets, tapered bushings, tensioners, torque limiters, and universal joints. Services such as bearing reconditioning and fix, ball screw repair, custom made deal machining, gearbox repair and overrunning clutch fix providers are accessible. Roller chains can be employed in conveyor and machinery production, industrial processing, equipment rebuilding, waste drinking water, sand and gravel, resource and die, steel, metals and scrap processing industrial programs. BS&solDIN StHangZhourd Stainless Steel Chains are developed in accordance with ISO 606B&comma BS 228 and DIN 8187&period of time Items are offered in 304&comma 316&comma 316L or 420 stainless metal for one strand &lparduplex&rpar&comma double strand &lparduplex&rpar and triple strand &lpartriplex&rpar&interval

Of the supplies&comma 304 stainless steel is the mo EPT well-liked a single on the EPT industry&period of time All the elements European stHangZhourd short pitch stainless steel roller chains are made fully of 304 stainless metal&comma which are ideal for purposes where resistance to acid or alkaline is needed&comma or in which the chain will be uncovered to humidity&comma h2o&comma or temperature variations&period Normal apps are located for bakery equipment&comma meals planning&comma packaging plant&comma pharmaceutical sector&comma and so forth&time period
Stainless steel chains are suited for corrosive situations involving food&comma chemicals&comma prescription drugs&comma and so on&comma aslo suitable for substantial and minimal temperature situations&interval

Main products are stainless steel limited pitch roller chains and attachments&comma double pitch stainless steel conveyor chains and attachments&comma Extended pitch meter conveyor chain&comma stainless metal hollow pin chians&comma leaf chain and double additionally chain&period
Stainless steel chain is suitable for foodstuff industry and environme of being eroded by chemical and drugs
Stainless steel chain&colon The materials of its components is stainless metal&period This chain is appropriate for foodstuff sector and environment of being eroded by chemical and medicine as well as in lower or large temperature&interval

Product Description

25-1 to 240-1
twenty five-2 to 240-2
25-3 to 240-3
04BB-1 to 72B-one
04B-2 to 72B-2
04B-3 to 72B-three

We source varied types of roller chains&comma conveyor chains&comma transmission chains and agricultural chains and so on&period of time In accordance drawings&period

Functions&colon
one&rpar A collection chains&colon
A&rpar Simplex&colon 25-1 – 240-1
B&rpar Duplex&colon 25-2 – 240-two
C&rpar Triplex&colon twenty five-3 – 240-three
two&rpar B sequence chains&colon
A&rpar Simplex&colon 04B-1 – 72B-one
B&rpar Duplex&colon 05B-2 – 72B-2
C&rpar Triplex&colon 05B-3 – 72B-3
3&rpar Resources&colon Stainless metal or carbon steel

four&rpar EPT chains available&colon Heavy-responsibility series roller chains&comma cottered sort quick pitch precision roller chains &lparA collection&rpar&comma hefty obligation collection cottered sort roller chains&comma EPT simplex roller chains&comma zinc plated chains&comma dacromet plated chains&comma nickel plated chains&comma anti-facet bow chains&comma side bow chains for pushing windows&comma side bow chains&comma facet bow chains&comma self-lubrication roller chains&comma silent chains&comma self-tooth forming chains &lparP&interval I&interval V&period Chains&rpar&comma heavy-duty cranked-hyperlink transmission chains&comma metal chains for sewage disposal&comma oil discipline chains&comma coupling chains&comma motorbike chains&comma O-ring motorcycle chains&comma engine system chain &lpartiming chains&rpar&comma double pitch transmission chains and double pitch transmission chain attachments&interval

Your prompt inquiry is very appreciated&period of time

The use of first products manufacturer’s (OEM) part figures or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our business and the shown substitute elements contained herein are not sponsored, accredited, or manufactured by the OEM.

China Roller chain and sprocket manufacturer Transmission 41 riv roller chain China in Pietermaritzburg South Africa  Conveyor Roller Chain with Special Attachment with ce certificate top quality low price

China Roller chain and sprocket manufacturer Transmission 41 riv roller chain China in Pietermaritzburg South Africa  Conveyor Roller Chain with Special Attachment with ce certificate top quality low price

China Roller chain and sprocket manufacturer Transmission 41 riv roller chain China in Pietermaritzburg South Africa  Conveyor Roller Chain with Special Attachment with ce certificate top quality low price

China Roller chain and sprocket manufacturer Transmission 41 riv roller chain China in Pietermaritzburg South Africa  Conveyor Roller Chain with Special Attachment with ce certificate top quality low price

China Roller chain and sprocket manufacturer Roller conveyor chain China in Mersin Turkey Chain Heavy Duty Precision Transmission Silent Chain with ce certificate top quality low price

China Roller chain and sprocket manufacturer Roller conveyor chain China in Mersin Turkey  Chain Heavy Duty Precision Transmission  Silent Chain with ce certificate top quality low price

We – EPG Team the most significant Chain and agricultural gearbox factory in China with 5 distinct branches.

In the meantime, our goods are created in accordance to high top quality requirements, and complying with the worldwide superior standard requirements.Though In addition, all our manufacturing techniques are in compliance with ISO9002 specifications for a specialised provider of a entire assortment of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….we consider delight in becoming “Collar Experts”, our knowledge in sourcing good quality merchandise has manufactured Lucas Industrial a valued supplier of other power transmission goods as well. Very first between these are linear bearings with interchanges available for nearly all variations and measurements. Other energy transmission merchandise available by means of Lucas Industrial contain leaf chain, roller chain, lumber conveying chain, rigid couplings, ball bearings, and sprockets. EPG roller chain fulfills or exceeds ANSI specifications and is produced in ISO qualified factories. As is the situation with our pillow block bearings and ball bearings, our roller chain parts are analyzed prior to cargo to insure good quality. The roller chain parts and roller chains we provide are pre-stretched to insure you have limited sag. It also comes with reliable rollers, ensuring that it is of the optimum good quality. For Totally free Samples
Seasoned Stuff
Prompt Shipping
International Approvals

Why pick us?
one.Xihu (West Lake) Dis. EPT Chain CO.Ltd recognized in 2001, our business has been ranked prime ten between domestic chain market.
two.We specialised in producing all sorts of chains and a heaps of unique chains, this sort of as A or B sequence chains, conveyor chains, driving chains, cement chains, agricultural chains and so on.
3.Prodcucts strictly enforce the worldwide stHangZhourd(ISO),the Chinese stHangZhourd(GB),American stHangZhourd(ANSI),Germany stHangZhourd(DIN),British stHangZhourd(BS) and Japanese stHangZhourd(JIS) and EPT stHangZhourds,which can meet up with the requirements of the stHangZhourd of different nations around the world.

Must any of these objects be of intere EPT to you,We will satisfied to give you a quotation upon receipt of your demands.

We seem forward to obtaining your inquriy before long.

 

The use of original tools manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our organization and the detailed alternative parts contained herein are not sponsored, accredited, or created by the OEM.

China Roller chain and sprocket manufacturer Roller conveyor chain China in Mersin Turkey  Chain Heavy Duty Precision Transmission  Silent Chain with ce certificate top quality low price

China Roller chain and sprocket manufacturer Roller conveyor chain China in Mersin Turkey  Chain Heavy Duty Precision Transmission  Silent Chain with ce certificate top quality low price

China Roller chain and sprocket manufacturer Roller conveyor chain China in Mersin Turkey  Chain Heavy Duty Precision Transmission  Silent Chain with ce certificate top quality low price

China Roller chain and sprocket manufacturer Roller conveyor chain China in Mersin Turkey  Chain Heavy Duty Precision Transmission  Silent Chain with ce certificate top quality low price

China Roller chain and sprocket manufacturer Agricultural working load of roller chain China in Kathmandu Nepal Carbon Alloy Steell Transmission Roller conveyor Chain with ce certificate top quality low price

China Roller chain and sprocket manufacturer Agricultural working load of roller chain China in Kathmandu Nepal  Carbon Alloy Steell Transmission Roller conveyor Chain with ce certificate top quality low price

We – EPG Group the greatest Chain and agricultural gearbox factory in China with 5 different branches.

In the meantime, our merchandise are produced according to higher top quality expectations, and complying with the global sophisticated regular standards.ISO In 2008, it was awarded with “Countrywide Export Commodity Inspection-cost-free Company”. 9001, ISO/TS 16949 and AS9100 licensed. Maker of standard and custom made roller chains for use in a broad selection of programs. Roller chains are accessible in one-pitch, double-pitch and precision types. Fulfills or exceed ANSI standards. EPG is a foremost supplier of high top quality, price-effective energy transmission parts. As our merchandise strains carry on to grow to meet up with our customer’s needs, our dedication to individualized customer service and on-time shipping remains next to none.

Why select us ?
one. HangZhou EPT Chain Team Co., Ltd proven in 1991, we have 5 subsidiaries in china and also have 6 subsidiaries overseas
2. we covering a generation spot of 200,a hundred square meters, have far more than 1,800 sets of sophisticated products and in excess of 3,a hundred hugely competent employees, the annual creation capacity has exceeded twenty,000,000 meters
3. we specialised in creating all varieties of stHangZhourd chains and particular chains, these kinds of as A or B series chains, push chains, conveyor chains, drag chains, agricultural chains, sprockets, gears and so on
4. we have attained ISO9001, ISO14001, ISO16969, AAA and API certificates.
five. Our partners amid entire world best enterprises, this kind of as JOHNDEERE, EPT HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so on. 

Our agricultural chains are as pursuing products:
one. EPT sequence large strength weighty duty quick pitch roller chains
two. EPT sequence high energy hefty responsibility limited pitch roller chains
3. Going for walks tractor chains
4. Combine chains
5. ZGS38 mix chain with attachments
6. Rice harvester chains
7. Various agricultural chain with attachments
8. S variety steel agricultural chains
9. S type metal agricultural chain with attachments
ten. A Kind metal agricultural chains
11. CA kind metal agricultural chains
12. C variety metal agricultural chain with attachments
thirteen. Special agricultural chain with attachments

one) Relevant Merchandise

two) Certificates 

HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd was founded in 1 9 9 1, and now it has five wholly owned subsidiaries, one in ZheJiang  province, other four in HangZhou, ZHangZhoug province, it is a professional manufacturer of chains, sprockets, tooth gears and various power transmission products.
 
The group has XIHU (WEST LAKE) DIS.HUA, ZIQIANG brands, is focused on producing all variety of stHangZhourd roller chains and special chains, such as conveyor chain, stainless steel chain, agricultural chain. With Xihu (West Lake) Dis.hua brand registered in more than 70 countries like America, Europe, Japan, it is building long term cooperation with these world top enterprises, such as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR.  
 
There is a technical center of province level, Xihu (West Lake) Dis.hua academician working station, experiment station for Xihu (West Lake) Dis.hua post doctors, and national hundreds of program set up in Xihu (West Lake) Dis.hua group. With these platforms and strong technical ability, the more than hundreds of Engineers and technicians have developed all variety of special high precise and high strength products, conducted mold programs for key components in the car and national industry revitalizing program. 
 
Great attention has been paid on environmental protection and energy saving. The product well displays environmental protection and energy saving. In the year of 2 0 0 0, Xihu (West Lake) Dis.hua took the lead in gaining I S O 1 4 0 0 1 environment management certificate and thereafter passed the inspection of clean production and recycling economy, winning the title of “ZHangZhoug Green Enterprise”.
 
“We are always serving our customers with our best products.” 
 

three) Contact Info

The use of first equipment manufacturer’s (OEM) element numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our business and the shown substitute areas contained herein are not sponsored, accredited, or produced by the OEM.

China Roller chain and sprocket manufacturer Agricultural working load of roller chain China in Kathmandu Nepal  Carbon Alloy Steell Transmission Roller conveyor Chain with ce certificate top quality low price

China Roller chain and sprocket manufacturer Agricultural working load of roller chain China in Kathmandu Nepal  Carbon Alloy Steell Transmission Roller conveyor Chain with ce certificate top quality low price

China Roller chain and sprocket manufacturer Agricultural working load of roller chain China in Kathmandu Nepal  Carbon Alloy Steell Transmission Roller conveyor Chain with ce certificate top quality low price

China Roller chain and sprocket manufacturer Agricultural working load of roller chain China in Kathmandu Nepal  Carbon Alloy Steell Transmission Roller conveyor Chain with ce certificate top quality low price

China Roller chain and sprocket manufacturer Industry bucket elevator chain introduction in Kabul Afghanistan Steel Forged Conveyor Roller Chain with Solid Color with ce certificate top quality low price

China Roller chain and sprocket manufacturer Industry bucket elevator chain introduction  in Kabul Afghanistan  Steel Forged Conveyor Roller Chain with Solid Color with ce certificate top quality low price

We – EPG Team the greatest Chain and agricultural gearbox manufacturing facility in China with 5 various branches.

In 2000, EPG took the guide in attaining ISO14001 setting administration certificate and thereafter handed the inspection of clean creation and recycling financial system, winning the title of “Zhejiang Environmentally friendly Company”.ISO Our primary items are chain , gears, sprocket, Needle Roller bearings, Cylindrical Roller Bearings, Rod conclude Bearings, Spherical simple bearings, Keep track of roller Bearings for Guideway, Roller Bearings, Mix Bearings for forklifts, Drinking water Pump Bearings, SNR Car Bearings and all kinds of Spherical Bearings. 9001 licensed company of precision roller chains. Sorts consist of solitary and numerous strand, hollow pin, side bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless metal, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. roller chains. Conveyor chains, engineered chains, silent chains, and tabletop chains are also offered. Other power transmission merchandise incorporate pillow blocks, conveyor idlers, conveyor pulleys, drive shafts, gear racks, equipment reducers, gears, overrunning clutches, motor bases, pulleys, screw conveyors, shaft couplings, sheaves, pace reducers, sprockets, tapered bushings, tensioners, torque limiters, and universal joints. Solutions these kinds of as bearing reconditioning and restore, ball screw repair, custom made deal machining, gearbox repair and overrunning clutch restore providers are available. Roller chains can be utilised in conveyor and equipment production, industrial processing, equipment rebuilding, squander water, sand and gravel, instrument and die, steel, metals and scrap processing industrial programs.

Cast Chain

          The fall cast chain is mainly composed of three fall cast parts that are the pin roll, center chain ring, and the outer chain sidebar. It can be conveniently assembled and disassembled, completely by hand without having tools. For instance, the assembly can be simply finished by passing the outer sidebar via the middle chain ring, and then rotate the center chain ring for 90 degrees to engage with the pin roll.

           When the chain varieties into a ring, it can be utilized as a conveyor chain for weighty loads. Our drop forged chain is usually discovered on the conveying gear and suspension equipment, in Car: +86~13083988828, foods processing, and steelmaking industries.

 

StHangZhourd Chain No. Reference pitch P (mm) Diameter of pin d2 (mm) Duration of pin L (mm) StHangZhourd length (min/max) (mm) Variety of pitch inside stHangZhourd size Sideward bending angle α (°) Width of sidebar h2 (mm) Tensile strength (KN) Excess weight for every meter (kg/m)
British method sequence X348 seventy six.six 12.7 47 3050.5/3095.two 40 9 27 ninety eight 2.seven
X458 102.four 16 fifty eight 3063.1/3090.2 thirty nine 35 187 5.two
468H 102.four 19.5 84.1 3063.1/3090.two thirty 9 47.8 311.7 eleven.five
X678 153.two 22.three 77 3055.1/3082.8 twenty seven fifty one.six 318 nine.five
698 153.2 28 95.three 3055.1/3082.eight twenty 7 60 515 17
698H 152.four 39 154 3039.2/3066.6 twenty 7 seventy two 1078 37.7
Metric technique collection F100X16 a hundred fifteen.five 77 2991.3/3018.three 30 nine 35 187 4.seven
F100X17 a hundred 17 seventy seven 2991.3/3018.three thirty 9 35 187 4
F160X24 one hundred sixty 23.5 96 3190.7/3219.five 20 seven fifty one.6 318 ten.three
British system sequence X348 76.six 12.7 forty seven 3050.5/3095.2 forty 9 27 ninety eight two.7
X458 102.four sixteen 58 3063.1/3090.two 30 nine 35 187 five.2
468H 102.four 19.5 eighty four.1 3063.1/3090.two thirty nine 47.eight 311.seven 11.five
X678 153.two 22.three seventy seven 3055.1/3082.8 20 seven 51.six 318 9.five
698 153.2 28 ninety five.3 3055.1/3082.eight 20 seven sixty 515 17
698H 152.four 39 154 3039.2/3066.six twenty 7 seventy two 1078 37.seven
Metric technique collection F100X16 a hundred fifteen.five seventy seven 2991.3/3018.three thirty 9 35 187 4.seven
F100X17 a hundred seventeen seventy seven 2991.3/3018.three 30 nine 35 187 four
F160X24 160 23.five 96 3190.7/3219.5 twenty seven fifty one.6 318 10.3

Solution Display

The use of authentic tools manufacturer’s (OEM) portion figures or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our firm and the shown replacement components contained herein are not sponsored, authorized, or made by the OEM.

China Roller chain and sprocket manufacturer Industry bucket elevator chain introduction  in Kabul Afghanistan  Steel Forged Conveyor Roller Chain with Solid Color with ce certificate top quality low price

China Roller chain and sprocket manufacturer Industry bucket elevator chain introduction  in Kabul Afghanistan  Steel Forged Conveyor Roller Chain with Solid Color with ce certificate top quality low price

China Roller chain and sprocket manufacturer Industry bucket elevator chain introduction  in Kabul Afghanistan  Steel Forged Conveyor Roller Chain with Solid Color with ce certificate top quality low price

China Roller chain and sprocket manufacturer Industry bucket elevator chain introduction  in Kabul Afghanistan  Steel Forged Conveyor Roller Chain with Solid Color with ce certificate top quality low price