Tag Archives: Conveyor Chain Belt

China Custom Chains Wheel Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains China High-Intensity Chain Gear and High Wear Resistance Chain Sprocket

Product Description

SPROCKET  5/8” X 3/8”  10B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

Notice: *welding hub

BASIC INFO.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

INSTALLATION AND USING

The chain  spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard, Nonstandard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear, Cut Gear
Toothed Portion Shape: Spur Gear
Material: 1045, Stainless Steel
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

wheel sprocket

Compatibility of Chain Sprockets with Wheels

In general, chain sprockets are designed to work with specific types of wheels, and there are certain requirements for ensuring proper compatibility:

  • Chain Size and Pitch: The chain sprocket must match the size and pitch of the chain it is intended to work with. For example, if you have a roller chain with a pitch of 0.625 inches, you need a sprocket with the same pitch to ensure a proper fit.
  • Number of Teeth: The number of teeth on the sprocket should be compatible with the number of chain links. The chain should mesh smoothly with the sprocket without any binding or skipping.
  • Tooth Profile: The tooth profile of the sprocket should match the shape of the chain’s rollers to ensure smooth engagement and minimize wear.
  • Shaft Size: The center hole (bore) of the sprocket should match the diameter of the shaft it will be mounted on. Using the correct shaft size ensures a secure fit and prevents wobbling.
  • Hub Configuration: Some sprockets have hubs, which are extensions on either side of the sprocket. The hub’s length and configuration should match the requirements of the specific application.
  • Material and Strength: Consider the material and strength of the sprocket based on the application’s load and environmental conditions. Heavy-duty applications may require sprockets made of robust materials to withstand the forces and stresses.

It’s crucial to follow the manufacturer’s specifications and guidelines when selecting a chain sprocket for a particular wheel. Mixing incompatible sprockets and wheels can result in premature wear, inefficiencies, and potential safety hazards. If you are unsure about the compatibility, consult with the manufacturer or a knowledgeable expert to ensure you choose the right sprocket for your specific application.

wheel sprocket

Using wheel sprocket Assembly in Robotics and Automation

Yes, wheel sprocket assemblies are commonly used in robotics and automation systems to transmit power and facilitate movement. These systems offer several advantages for robotic applications:

  • Efficiency: wheel sprocket assemblies provide efficient power transmission, ensuring smooth and precise movement of robotic components.
  • Compact Design: The compact nature of sprockets and wheels allows for space-saving designs, making them ideal for robotic applications where space is limited.
  • Precision: Sprockets and wheels with accurate teeth profiles provide precise motion control, crucial for robotics and automation tasks that require high levels of accuracy.
  • Low Noise: Properly lubricated and maintained wheel sprocket systems generate minimal noise during operation, contributing to quieter robotic movements.
  • Customizability: wheel sprocket assemblies can be customized to suit specific robotic requirements, such as different gear ratios, sizes, and materials.
  • Multiple Configurations: Depending on the robotic application, different configurations like single or multiple sprockets, idler sprockets, or rack and pinion systems can be used.
  • High Load Capacity: Sprockets made from durable materials like steel can handle substantial loads, making them suitable for heavy-duty robotic tasks.

Examples of robotics and automation systems that commonly use wheel sprocket assemblies include:

  • Robotic Arms: wheel sprocket systems are utilized in robotic arms to control their movement and reach.
  • Automated Guided Vehicles (AGVs): AGVs use wheel sprocket assemblies for propulsion and steering, enabling them to navigate autonomously.
  • Conveyor Systems: In automated factories, conveyor belts are often driven by sprockets and wheels for efficient material handling.
  • Mobile Robots: Wheeled mobile robots use wheel sprocket assemblies to drive their wheels, enabling them to move in various directions.
  • Robot Grippers: wheel sprocket mechanisms can be integrated into robot grippers to facilitate gripping and handling objects.

The choice to use wheel sprocket assemblies in robotics and automation depends on the specific application requirements, load capacity, precision, and environmental conditions. By selecting the appropriate sprockets, wheels, and materials, engineers can ensure reliable and efficient robotic performance in a wide range of automated tasks.

wheel sprocket

Calculating Gear Ratio for a wheel sprocket Setup

In a wheel sprocket system, the gear ratio represents the relationship between the number of teeth on the sprocket and the number of teeth on the wheel. The gear ratio determines the speed and torque relationship between the two components. To calculate the gear ratio, use the following formula:

Gear Ratio = Number of Teeth on Sprocket ÷ Number of Teeth on Wheel

For example, if the sprocket has 20 teeth and the wheel has 60 teeth, the gear ratio would be:

Gear Ratio = 20 ÷ 60 = 1/3

The gear ratio can also be expressed as a decimal or percentage. In the above example, the gear ratio can be expressed as 0.3333 or 33.33%.

It’s important to note that the gear ratio affects the rotational speed and torque of the wheel sprocket. A gear ratio greater than 1 indicates that the sprocket’s speed is higher than the wheel’s speed, resulting in increased rotational speed and reduced torque at the wheel. Conversely, a gear ratio less than 1 indicates that the sprocket’s speed is lower than the wheel’s speed, resulting in decreased rotational speed and increased torque at the wheel.

The gear ratio is crucial in various applications where precise control of speed and torque is required, such as bicycles, automobiles, and industrial machinery.

China Custom Chains Wheel Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains China High-Intensity Chain Gear and High Wear Resistance Chain Sprocket  China Custom Chains Wheel Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains China High-Intensity Chain Gear and High Wear Resistance Chain Sprocket
editor by CX 2024-02-11

China Roller Chains and Bush Chains Conveyor Belt Parts Transmission Gearbox OEM ODM Casting Parts Chain Wheel, Sprocket Wheel with Best Sales

Item Description

SPROCKET  5/8” X 3/8”  10B Sequence SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C one.6mm
Tooth Width b1 9.0mm
Tooth Width B1 nine.1mm
Tooth Width B2 twenty five.5mm
Tooth Width B3 forty two.1mm
10B Collection ROLLER CHAINS  
Pitch fifteen.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47. forty one.48 twenty five 10 twenty five 25 twelve 40 twenty five 12 fifty five
9 52.six 46.42 thirty ten twenty five thirty 12 40 thirty twelve fifty five
10 fifty seven.5 fifty one.37 35 ten twenty five 35 twelve 40 35 12 fifty five
eleven 63. 56.34 37 12 thirty 39 14 forty 39 sixteen fifty five
12 sixty eight. sixty one.34 42 12 thirty 44 fourteen forty forty four 16 fifty five
13 73. 66.32 forty seven 12 30 forty nine 14 40 forty nine sixteen 55
fourteen seventy eight. seventy one.34 52 12 30 54 14 40 54 16 fifty five
fifteen 83. seventy six.36 fifty seven twelve 30 fifty nine fourteen 40 fifty nine sixteen fifty five
16 88. eighty one.37 60 12 30 sixty four 16 forty five 64 16 sixty
seventeen 93. 86.39 sixty twelve 30 sixty nine 16 45 sixty nine 16 60
eighteen 98.3 91.forty two 70 14 30 74 sixteen forty five seventy four 16 sixty
19 103.three 96.forty five 70 14 30 79 sixteen forty five seventy nine 16 60
20 108.four one zero one.49 75 14 thirty eighty four 16 45 eighty four 16 sixty
21 113.four 106.52 seventy five sixteen thirty 85 16 forty five eighty five twenty 60
22 118. 111.fifty five eighty 16 30 ninety sixteen forty five ninety twenty 60
23 123.five 116.fifty eight eighty 16 30 ninety five 16 forty five ninety five 20 sixty
24 128.3 121.sixty two eighty sixteen 30 a hundred 16 forty five a hundred 20 sixty
twenty five 134. 126.66 80 sixteen 30 105 sixteen forty five 105 twenty sixty
26 139. 131.70 85 20 35 a hundred and ten 20 forty five one hundred ten 20 60
27 one hundred forty four. 136.seventy five eighty five 20 35 a hundred and ten 20 forty five a hundred and ten twenty sixty
28 148.seven 141.78 90 20 35 one hundred fifteen 20 forty five one hundred fifteen 20 60
29 153.8 146.83 90 20 35 a hundred and fifteen twenty forty five 115 twenty sixty
thirty 158.8 151.87 90 20 35 a hundred and twenty twenty forty five 120 twenty 60
31 163.9 156.ninety two 95 twenty 35 a hundred and twenty twenty 45 a hundred and twenty 20 sixty
32 168.nine 161.ninety five ninety five twenty 35 120 twenty forty five a hundred and twenty twenty 60
33 174.5 167.00 95 20 35 a hundred and twenty 20 forty five 120 20 sixty
34 179. 172.05 ninety five twenty 35 a hundred and twenty 20 forty five 120 twenty 60
35 184.one 177.ten 95 twenty 35 120 20 45 a hundred and twenty twenty 60
36 189.one 182.15 a hundred twenty 35 one hundred twenty twenty forty five a hundred and twenty 25 60
37 194.two 187.20 a hundred twenty 35 120 twenty 45 a hundred and twenty 25 60
38 199.2 192.24 100 20 35 120 20 forty five a hundred and twenty 25 sixty
39 204.two 197.29 a hundred twenty 35 120 twenty 45 one hundred twenty 25 60
40 209.3 202.34 100 20 35 one hundred twenty twenty 45 a hundred and twenty twenty five 60
41 214.8 207.38 *one hundred twenty forty 120 20 fifty *130 twenty five sixty
forty two 2,199 212.forty three *one hundred twenty forty 120 twenty 50 *130 25 60
forty three 224.9 217.forty eight *one hundred twenty 40 a hundred and twenty 20 fifty *one hundred thirty 25 60
forty four 230. 222.53 *one hundred 20 forty a hundred and twenty twenty fifty *130 25 60
forty five 235. 227.58 *a hundred twenty forty *120 20 50 *one hundred thirty twenty five sixty
46 240.one 232.63 *one hundred twenty forty *one hundred twenty twenty fifty *130 twenty five sixty
47 245.one 237.sixty eight *one hundred 20 40 *120 twenty fifty *130 twenty five sixty
forty eight 250.2 242.seventy three *one hundred 20 forty *120 twenty fifty *130 25 sixty
49 255.2 247.78 *a hundred 20 forty *120 20 50 *130 25 60
50 260.three 252.eighty two *a hundred 20 40 *120 20 50 *130 twenty five 60
51 265.3 257.87 *100 20 forty *120 twenty 50 *one hundred thirty twenty five 60
52 270.4 262.ninety two *a hundred 20 forty *a hundred and twenty 20 50 *a hundred thirty twenty five 60
53 275.four 267.97 *one hundred twenty 40 *one hundred twenty twenty fifty *one hundred thirty twenty five sixty
54 280.five 273.03 *one hundred 20 40 *a hundred and twenty twenty 50 *a hundred thirty 25 sixty
fifty five 285.five 278.08 *a hundred twenty forty *a hundred and twenty 20 fifty *a hundred thirty twenty five sixty
fifty six 290.6 283.thirteen *a hundred 20 forty *a hundred and twenty twenty 50 *a hundred thirty twenty five 60
57 296. 288.18 *one hundred twenty 40 *a hundred and twenty 20 fifty *a hundred thirty 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 sixty four
59 305.seven 298.28 *a hundred twenty 43 *120 twenty fifty seven *130 25 64
60 310.8 303.33 *100 20 43 *a hundred and twenty twenty 57 *one hundred thirty twenty five 64
62 321.four 313.43 *one hundred twenty 43 *120 twenty fifty seven *130 twenty five sixty four
sixty four 331.5 323.fifty three *one hundred twenty forty three *a hundred and twenty twenty 57 *a hundred thirty 25 67
sixty five 336.five 328.fifty eight *100 twenty forty three *120 twenty fifty seven *a hundred thirty twenty five 67
sixty six 341.6 333.sixty four *100 twenty forty three *a hundred and twenty 20 57 *a hundred thirty twenty five sixty seven
sixty eight 351.seven 343.74 *one hundred twenty 43 *a hundred and twenty 20 fifty seven *a hundred thirty 25 sixty seven
70 361.8 353.84 *100 20 forty three *one hundred twenty 20 57 *130 25 67
seventy two 371.9 363.94 *a hundred 20 43 *120 twenty fifty seven *one hundred thirty twenty five sixty seven
75 387.one 379.10 *100 20 43 *one hundred twenty twenty 57 *a hundred thirty 25 67
seventy six 392.one 384.fifteen *one hundred twenty 43 *one hundred twenty twenty 57 *a hundred thirty 25 67
seventy eight 402.2 394.twenty five *one hundred 20 43 *120 twenty fifty seven *one hundred thirty 25 67
80 412.3 404.36 *a hundred 20 forty three *one hundred thirty twenty fifty seven *130 twenty five 67
85 437.six 429.62 *100 twenty fifty *a hundred thirty twenty 58 *130 twenty five 67
90 462.8 454.88 *one hundred 20 50 *one hundred thirty twenty 58 *130 25 sixty seven
95 488.five 480.14 *a hundred twenty 50 *130 twenty 58 *a hundred thirty 25 sixty seven
100 513.4 505.40 *a hundred 20 fifty *a hundred thirty twenty 58 *one hundred thirty 25 sixty seven
one hundred ten 563.nine 555.ninety two *one hundred twenty fifty *130 twenty fifty eight *a hundred thirty twenty five 67
114 584.1 576.thirteen *100 twenty 50 *a hundred thirty 20 fifty eight *130 25 sixty seven
a hundred and twenty 614.four 606.forty five *100 20 fifty *one hundred thirty twenty fifty eight *a hundred thirty 25 sixty seven
a hundred twenty five 639.seven 631.51 *one hundred twenty 50 *one hundred thirty 20 fifty eight *a hundred thirty 25 67

Observe: *welding hub

Standard Information.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, and many others
two. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface area Treatment method Heat treatment, Quenching treatment method, Large frequency normalizing therapy, Sharpening, Electrophoresis paint processing, Anodic oxidation therapy, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so forth
Style criterion ISO DIN ANSI & Customer Drawings
Dimension Client Drawings & ISO standard 
Application Industrial transmission gear
Bundle Picket Case / Container and pallet, or created-to-purchase
Certification ISO9001: 2008 
Gain Top quality very first, Services first, Aggressive cost, Quick delivery
Supply Time 20 times for samples. 45 days for official order.

Installation AND Using

The chain  spoket, as a travel or deflection for chains, has pockets to hold the chain links with a D-profile cross area with flat aspect surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain website link centre plane. The chain back links are pressed firmly from the outer surfaces and every of the aspect surfaces by the angled laying surfaces at the foundation of the pockets, and also the support surfaces of the wheel human body collectively with the stop sides of the webs fashioned by the major and trailing walls of the pocket.

Recognize

When fitting new chainwheels it is extremely critical that a new chain is equipped at the very same time, and vice versa. Using an old chain with new sprockets, or a new chain with outdated sprockets will trigger rapid use.

It is important if you are putting in the chainwheels by yourself to have the manufacturing facility service guide certain to your model. Our chainwheels are manufactured to be a immediate substitute for your OEM chainwheels and as this kind of, the installation ought to be performed according to your versions services guide.

During use a chain will stretch (i.e. the pins will put on creating extension of the chain). Employing a chain which has been stretched far more than the above optimum allowance brings about the chain to trip up the teeth of the sprocket. This leads to injury to the tips of the chainwheels teeth, as the power transmitted by the chain is transmitted fully by means of the prime of the tooth, instead than the complete tooth. This final results in significant sporting of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Specifications companies (such as ANSI and ISO) keep expectations for design, proportions, and interchangeability of transmission chains. For illustration, the following Desk exhibits information from ANSI regular B29.1-2011 (Precision Electrical power Transmission Roller Chains, Attachments, and Sprockets) created by the American Modern society of Mechanical Engineers (ASME). See the references[8][9][ten] for added information.

ASME/ANSI B29.1-2011 Roller Chain Common SizesSizePitchMaximum Roller DiameterMinimum Greatest Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Regular Dimensions
Measurement Pitch Greatest Roller Diameter Least Greatest Tensile Strength Measuring Load
25 .250 in (6.35 mm) .130 in (3.thirty mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.fifty three mm) .two hundred in (5.08 mm) one,760 lb (800 kg) 18 lb (8.2 kg)
forty one .five hundred in (twelve.70 mm) .306 in (7.77 mm) one,500 lb (680 kg) eighteen lb (8.2 kg)
forty .500 in (twelve.70 mm) .312 in (7.92 mm) three,one hundred twenty five lb (1,417 kg) 31 lb (14 kg)
fifty .625 in (15.88 mm) .400 in (10.sixteen mm) four,880 lb (2,210 kg) 49 lb (22 kg)
60 .750 in (19.05 mm) .469 in (11.ninety one mm) seven,030 lb (3,one hundred ninety kg) 70 lb (32 kg)
80 one.000 in (twenty five.forty mm) .625 in (15.88 mm) twelve,500 lb (5,700 kg) a hundred twenty five lb (fifty seven kg)
a hundred 1.250 in (31.seventy five mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
one hundred twenty 1.five hundred in (38.10 mm) .875 in (22.23 mm) 28,one hundred twenty five lb (twelve,757 kg) 281 lb (127 kg)
a hundred and forty 1.750 in (forty four.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
a hundred and sixty 2.000 in (50.80 mm) one.one hundred twenty five in (28.fifty eight mm) fifty,000 lb (23,000 kg) five hundred lb (230 kg)
a hundred and eighty 2.250 in (fifty seven.15 mm) 1.460 in (37.08 mm) sixty three,280 lb (28,seven hundred kg) 633 lb (287 kg)
two hundred 2.500 in (sixty three.50 mm) 1.562 in (39.sixty seven mm) 78,a hundred seventy five lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (seventy six.20 mm) 1.875 in (forty seven.sixty three mm) 112,five hundred lb (fifty one,000 kg) 1,000 lb (450 kg

For mnemonic functions, under is yet another presentation of key proportions from the identical common, expressed in fractions of an inch (which was portion of the contemplating powering the choice of chosen figures in the ANSI common):

Pitch (inches) Pitch expressed
in eighths
ANSI regular
chain amount
Width (inches)
14 twoeight two5 18
3eight three8 35 three16
1two 4eight four1 1four
one2 48 four five16
fiveeight five8 5 three8
threefour sixeight six one2
1 eight8 eight 5eight

Notes:
one. The pitch is the distance in between roller centers. The width is the distance in between the website link plates (i.e. marginally much more than the roller width to allow for clearance).
two. The proper-hand digit of the common denotes 0 = regular chain, 1 = lightweight chain, 5 = rollerless bushing chain.
three. The left-hand digit denotes the amount of eighths of an inch that make up the pitch.
four. An “H” pursuing the normal number denotes heavyweight chain. A hyphenated variety pursuing the standard variety denotes double-strand (2), triple-strand (3), and so on. Hence 60H-3 denotes quantity 60 heavyweight triple-strand chain.
 A common bicycle chain (for derailleur gears) utilizes narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load ability. The a lot more sprockets at the rear wheel (traditionally 3-6, today 7-twelve sprockets), the narrower the chain. Chains are bought in accordance to the number of speeds they are developed to perform with, for example, “ten speed chain”. Hub gear or single pace bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the greatest thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped backlinks have an even amount of backlinks, with every single narrow url adopted by a broad one. Chains built up with a uniform variety of website link, slim at 1 and broad at the other finish, can be manufactured with an odd variety of back links, which can be an benefit to adapt to a special chainwheel-length on the other aspect this sort of a chain tends to be not so powerful.

Roller chains created making use of ISO standard are at times called as isochains.

 

WHY Select US 

one. Reliable High quality Assurance Program
2. Slicing-Edge Pc-Controlled CNC Equipment
three. Bespoke Remedies from Highly Knowledgeable Experts
4. Customization and OEM Offered for Certain Application
5. Comprehensive Stock of Spare Parts and Add-ons
6. Well-Produced Around the world Marketing and advertising Network
seven. Effective Soon after-Sale Service System

 

The 219 sets of advanced automated creation gear supply ensures for large item good quality. The 167 engineers and specialists with senior skilled titles can design and create items to satisfy the precise calls for of buyers, and OEM customizations are also offered with us. Our sound worldwide support network can supply clients with timely right after-income technological companies.

We are not just a producer and supplier, but also an market expert. We work professional-actively with you to offer specialist suggestions and product tips in purchase to finish up with a most value efficient merchandise obtainable for your particular software. The consumers we provide throughout the world selection from conclude users to distributors and OEMs. Our OEM replacements can be substituted where ever essential and suitable for each restore and new assemblies.

 

 

US $9.7
/ Piece
|
3,000 Pieces

(Min. Order)

###

Standard Or Nonstandard: Nonstandard, Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear, Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Alloy Steel,

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

###

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58
US $9.7
/ Piece
|
3,000 Pieces

(Min. Order)

###

Standard Or Nonstandard: Nonstandard, Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear, Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Alloy Steel,

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

###

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
sprocket

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
sprocket

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
sprocket

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China Roller Chains and Bush Chains Conveyor Belt Parts Transmission Gearbox OEM ODM Casting Parts Chain Wheel, Sprocket Wheel     with Best Sales China Roller Chains and Bush Chains Conveyor Belt Parts Transmission Gearbox OEM ODM Casting Parts Chain Wheel, Sprocket Wheel     with Best Sales
editor by czh 2023-01-03

China Chain and sprocket factory : Quality Type-TD 24B-2 Chain Guide – Duplex in Warangal India Food Grade Hairise 900 Series Colored Flat Top Belt for Conveyor System with ce certificate top quality low price

China Chain and sprocket factory : Quality Type-TD 24B-2 Chain Guide - Duplex in Warangal India  Food Quality Hairise 900 Series Colored Flat Prime Belt for Conveyor Program with ce certification top high quality minimal price

We – EPG Team the biggest Chain and agricultural gearbox manufacturing facility in China with 5 distinct branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

With EPG brand registered in more than 70 nations like The united states , Europe , Japan and so on, it has associates among world leading enterprises, this sort of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so forth.Company In 2008, it was awarded with “Nationwide Export Commodity Inspection-totally free Organization”. of standard and personalized roller chains. Appropriate for ageing, tension relieving, warmth treating and powder coating purposes. Aerospace, automotive, navy, strength, composite, pharmaceutical and various other industries served. Turnkey methods integration and most items offered in stock. Roller Chain Elements Each chain is related at the ends to kind a total circle or chain loop by a master connecting link. Cotter plates or spring clips maintain the connecting link’s pins from operating free. Item Particulars

Manufacturing Data

Model No. Har900 Flat Best
Material  POM/PP
Pitch 27.2mm
Thickness 9.8mm
Working Potential 22000N/m
Cleat Height 32/50mm
Bodyweight five.5/7.3kg/sq
Delivery   Within 7 woeking days
Software Foods&Beverage Industry

Related Goods

Generation Processes

Packaging 

Organization Profile

Mujia EPT Technological innovation (ZheJiang ) Firm Restricted. 

  We specialized in the discipline of transmission tools for 16 years, covering plastic slat leading chains, plastic modular belts, stainless steel chain,multiflex conveyor chains, versatile chains,  conveyor add-ons, chain conveyor, chain network conveyor, steel mesh conveyor, roller conveyor, belt conveyor, update conveyor, screw conveyor, inclined conveyor and so on. Please re EPT confident that personalize is also obtainable.

  Our products has passed ISOISO9001 intercontinental quality program authentication, CE, Food and drug administration, SGS and so on. Researching and developing new products continually. On the foundation of mutual advantage, we will meet up with your requirements with ample stock, sensible price tag and comprehensive service programs.

  Our products are extremely well-known in a lot of countries, this sort of as The usa, Bratain, Italy, Russia, France, Poland, Spain, France,Thailand, Australia, Bangladesh, Brazil,Canada, Chile, Denmark, Egypt, Finland, Germany, Ghana, Greece, India, Indonesia,Eire, Japan, Korea, Kuwait, Mexico, Morocco, Netherlands,Pakistan,Sweden, Turkey, United Kingdom, Venezuela, Vietnam, Vietnam and so on.


Make contact with Us

 

The use of original tools manufacturer’s (OEM) part figures or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our company and the listed alternative parts contained herein are not sponsored, accepted, or created by the OEM.

China Chain and sprocket factory : Quality Type-TD 24B-2 Chain Information - Duplex in Warangal India  Foods Quality Hairise 900 Series Coloured Flat Best Belt for Conveyor System with ce certification leading good quality lower price tag

China Chain and sprocket factory : Quality Type-TD 24B-2 Chain Information - Duplex in Warangal India  Foods Quality Hairise 900 Series Colored Flat Top Belt for Conveyor System with ce certification top quality low value

China Chain and sprocket factory : Quality Type-TD 24B-2 Chain Guide - Duplex in Warangal India  Foodstuff Grade Hairise 900 Series Colored Flat Best Belt for Conveyor Method with ce certification leading quality reduced cost

China Chain and sprocket factory : Quality Type-TD 24B-2 Chain Manual - Duplex in Warangal India  Food Grade Hairise 900 Series Coloured Flat Leading Belt for Conveyor Method with ce certification top top quality minimal cost

Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Rubber MSR1594 Chain in Taizhong China, Taiwan Province of China Conveyor Belt with Top Quality for Sale with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Rubber MSR1594 Chain in Taizhong China, Taiwan Province of China  Conveyor Belt with Top Quality for Sale with ce certificate top quality low price

We – EPG Group the largest Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Full use has been manufactured of all types of advanced tactics and technology to reach excelsior producing. roller Our organization pays particular consideration to customers’ wants, listening to the distinct needs of each buyer and guaranteeing complete satisfaction.chains. Conveyor chains, engineered chains, silent chains, and tabletop chains are also obtainable. Other electricity transmission merchandise include pillow blocks, conveyor idlers, conveyor pulleys, travel shafts, equipment racks, equipment reducers, gears, overrunning clutches, motor bases, pulleys, screw conveyors, shaft couplings, sheaves, speed reducers, sprockets, tapered bushings, tensioners, torque limiters, and common joints. Services this sort of as bearing reconditioning and fix, ball screw fix, personalized deal machining, gearbox restore and overrunning clutch repair providers are available. Roller chains can be employed in conveyor and machinery manufacturing, industrial processing, machine rebuilding, squander h2o, sand and gravel, instrument and die, steel, metals and scrap processing industrial purposes. Company of standard and custom roller chains. Suited for getting older, tension relieving, warmth dealing with and powder coating apps. Aerospace, automotive, navy, strength, composite, pharmaceutical and numerous other industries served. Turnkey techniques integration and most products available in inventory. Solution Description

EP  Material Main Rubber EP150  3Ply  4ply 12MPA EPT Belt
 
1,Rubber EPT Belts: Nylon /Polyester/Cotton are the best quality synthetic fibers
and most widely used fabric in the rubber industry use nowadays. their  outstanding merits 
are its high abrasion resistance,high tensile  strength and good fatigue resistance.
 
2,Characteristics of Conveyor belts with nylon (NN)/Polyester (EP)canvas:  thin belt body ,
high tensile strength,good shock resistance,good trough ability,high adhesion between plies,
splendid flexibility and long working life.

 3,Usage of Nylon/Polyester conveyor belts: suitable for medium,extended-distance and heavy-
load transportation of materials,this sort of as Crushed Stone,Gravel,Quarry Supreme.

4,StHangZhourd:GB/T7984-2013, GB/10822-89

 

Prior to the shipment  we will te EPT every belt to ensure  you  the good quality .

Application

FAQ
 
one.Q: Are you a manufacturing unit or trading firm?
A: We are manufactuer of the conveyor belt.
 
two.Q: What is your minimal purchase amount? 
A: The MOQ is 300meter,Trial buy is welcome at lower quantity, p EPT suggest the estimated amount, so that we can check the be EPT price for you.
 
three.Q: Can you do OEM product?
A: Yes, we can provide OEM service .
 
4.Q: How prolonged guarantee for products ? 
A: All of our products have one year guarantee.
 
5:Q: How about your top quality?
A: Our quality are great and steady. The Quality Certification will issued for each shipment.
 

Associated products

Cotton Canvas EPT Belt
Nylon EPT Belt
Flame Retardant EPT belt
Corrugated and Sidewall EPT Belt
Etectonic Scales Devoted Belt
Steel Wire EPT Belt
Polyster EPT Belt
Heat Resistant EPT Belt
Patterned EPT Belt
Acid and Alkall-resistant EPT Belt
Oil Resistant EPT Belt

 

The use of unique products manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our firm and the outlined replacement areas contained herein are not sponsored, approved, or created by the OEM.

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Rubber MSR1594 Chain in Taizhong China, Taiwan Province of China  Conveyor Belt with Top Quality for Sale with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Rubber MSR1594 Chain in Taizhong China, Taiwan Province of China  Conveyor Belt with Top Quality for Sale with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Rubber MSR1594 Chain in Taizhong China, Taiwan Province of China  Conveyor Belt with Top Quality for Sale with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Rubber MSR1594 Chain in Taizhong China, Taiwan Province of China  Conveyor Belt with Top Quality for Sale with ce certificate top quality low price

China Chain and sprocket factory : Plastic roller chain for less China in Joao Pessoa Brazil Chain Belt Stainless Steel Roller Conveyor with ce certificate top quality low price

China Chain and sprocket factory : Plastic roller chain for less China in Joao Pessoa Brazil  Chain Belt Stainless Steel Roller Conveyor with ce certificate top quality low price

We – EPG Group the biggest Chain and agricultural gearbox manufacturing facility in China with 5 diverse branches. For far more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Retaining in head that excellent services is the key to cooperating with clients, we try to satisfy large quality specifications, offer you competitive charges and guarantee prompt supply. roller If you want any information or samples, please make contact with us and you will have our before long reply.chains. Conveyor chains, engineered chains, silent chains, and tabletop chains are also accessible. Other energy transmission products consist of pillow blocks, conveyor idlers, conveyor pulleys, travel shafts, equipment racks, equipment reducers, gears, overrunning clutches, motor bases, pulleys, screw conveyors, shaft couplings, sheaves, speed reducers, sprockets, tapered bushings, tensioners, torque limiters, and common joints. Providers this kind of as bearing reconditioning and mend, ball screw mend, customized agreement machining, gearbox fix and overrunning clutch fix companies are accessible. Roller chains can be utilised in conveyor and equipment producing, industrial processing, machine rebuilding, waste h2o, sand and gravel, instrument and die, metal, metals and scrap processing industrial programs. industrial elements which includes roller chains. Roller chains are offered in common, nickel plated & stainless steel components in pitch dia. ranging from 1/4 in. to 3 in. Kinds contain leaf chains in lacing configurations ranging from 2 x 2 to 8 x 8. Leaf chains are obtainable in pitch measurements ranging from 1/2 in. to 2 in., pin dia. ranging from .156 in. to .687 in. & tensile strengths ranging from 4,000 lbs. to 156,000 lbs. Purposes contain agricultural, conveyors, drilling, electronics assembly, foods processing, fork carry vehicles, hoists, packaging & textile equipment. Plastic Chain Sort EPT Equipment can be linked with packaging generation line.

The conveyor duration, width and top can be tailored.

Belt variety
Plastic chain type
Stainless metal chain type
 
Packaging & Transport

Package deal Wood Situation
Cargo By sea, air or land
Payment Conditions FOB HangZhou/ZheJiang , C&F, CIF, DDU
Payment 30% deposit and balance 70% prior to shipment by TT
Delivery Time thirty-sixty times according to various demand and quantity

Packaging & Delivery

Deal Wooden Scenario
Shipment By sea, air or land
Payment Phrases FOB HangZhou/ZheJiang , C&F, CIF, DDU
Payment 30% deposit and balance 70% prior to cargo by TT
Shipping and delivery Time 30-sixty days in accordance to diverse desire and quantity

Firm Information:
Chunlai is a reputed maker for various kinds of computerized filling & sealing packaging devices. For much more than ten a long time, Chunlai supplys packaging machines that completely satisfy customer’s needs.
No issue your solution is solid, liquid, paste, powder or granule, Chunlai has device meet up with your packaging prerequisite. Chunlai provide packaging devices for rice packing, seafood packing, beverage packing, dairy packing, soybean item packing, snack meals packing, fa EPT foods packing, day-to-day solution packing, cosmetic product packing, and many others..
Chunlai gives a extensive skilled specialized service. This makes certain you the high top quality generation, safe sealing finish, ease procedure and bare minimum servicing.
Every single machine is meticulously inspected and tested by our hugely experienced staff before cargo.

The use of unique gear manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our business and the shown replacement parts contained herein are not sponsored, accepted, or produced by the OEM.

China Chain and sprocket factory : Plastic roller chain for less China in Joao Pessoa Brazil  Chain Belt Stainless Steel Roller Conveyor with ce certificate top quality low price

China Chain and sprocket factory : Plastic roller chain for less China in Joao Pessoa Brazil  Chain Belt Stainless Steel Roller Conveyor with ce certificate top quality low price

China Chain and sprocket factory : Plastic roller chain for less China in Joao Pessoa Brazil  Chain Belt Stainless Steel Roller Conveyor with ce certificate top quality low price

China Chain and sprocket factory : Plastic roller chain for less China in Joao Pessoa Brazil  Chain Belt Stainless Steel Roller Conveyor with ce certificate top quality low price

Best made in China – replacement parts – Chain & sprocket manufacturer : High 40 pitch chain sprockets China in Douala Cameroon Quality Slope Belt Conveyor Production Line Saves Costs with ce certificate top quality low price

Best  made in China - replacement parts - Chain & sprocket manufacturer : High 40 pitch chain sprockets China in Douala Cameroon  Quality Slope Belt Conveyor Production Line Saves Costs with ce certificate top quality low price

We – EPG Group the largest Chain and agricultural gearbox manufacturing facility in China with 5 distinct branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Owing to our sincerity in offering very best service to our consumers, understanding of your needs and overriding sense of responsibility towards filling ordering specifications,a specialised provider of a full variety of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….support Our products are used in numerous fields.needed. engineering class chains & precision roller chains. Single strand chain, multi-strand chains, double pitch chains, corrosion resistant chains, self-lubricating chains, attachment chains, leaf chains, and specialty chains.

Dercription

   The specifications of the parameters are primarily based on the needs of the buyer. Of program, if you do not require to customize, you can also e-mail us, we can give stHangZhourd solution requirements.

model:Belt conveyor
 
Brand name:ZK  Sort quantity:
Conveying capacity:two hundred(t/h)
 
Energy:20KW Conveying length 10m
External measurement:According to customization Weight:In accordance to customization Discipline of application:Food ,logistics and express factory
 

 
 

Our business


Packing & Delivery


FAQ:
Q1:Are you manufacturing unit or trading firm?
A: We are manufacturing unit and maker.
 
Q2: In which is your factory positioned? How can I visit your factory?
A: We are found in HangZhou. It is about 4 hours to reach HangZhou or ZheJiang port from our manufacturing facility in China.
 
Q3:How to area my get?
A: Ju EPT get in touch with us through Trade Supervisor, E-mail, Skype or phone to verify the equipment, making the deposit then we will commence production.
 
This autumn : What is the payment term?
A: 50% TT in advance, 50% TT just before supply after creation
 
Q5:How prolonged is the creation time?
A: About 10 functioning times.
Q6: Fir EPT time import, how can I believe that you would send out item ?
A: We are confirmed firm by manufactured-in-China.com to make transaction effective.
Q7: How to make certain that I received the device undamaged?
A: Firstly, our package deal is stHangZhourd for shipment, we mu EPT confirm equipment undamaged prior to delivery, and we have acquired insurance policy for you, we will just take the obligation if machines broken.
Q8: What right after-income support or any question about items?
A: All machines appreciate 2 years guarantee , you can make contact with me by mail if any troubles, I will reply you as quickly as achievable.

Contact information

 

The use of unique products manufacturer’s (OEM) component quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our organization and the detailed substitute elements contained herein are not sponsored, accepted, or produced by the OEM.

Best  made in China - replacement parts - Chain & sprocket manufacturer : High 40 pitch chain sprockets China in Douala Cameroon  Quality Slope Belt Conveyor Production Line Saves Costs with ce certificate top quality low price

Best  made in China - replacement parts - Chain & sprocket manufacturer : High 40 pitch chain sprockets China in Douala Cameroon  Quality Slope Belt Conveyor Production Line Saves Costs with ce certificate top quality low price

Best  made in China - replacement parts - Chain & sprocket manufacturer : High 40 pitch chain sprockets China in Douala Cameroon  Quality Slope Belt Conveyor Production Line Saves Costs with ce certificate top quality low price

Best  made in China - replacement parts - Chain & sprocket manufacturer : High 40 pitch chain sprockets China in Douala Cameroon  Quality Slope Belt Conveyor Production Line Saves Costs with ce certificate top quality low price

Best made in China – replacement parts – Chain & sprocket manufacturer : Stainless number 50 roller chain China in Cancun Mexico Steel Balanced Woven Wire Mesh Conveyor Belt with ce certificate top quality low price

Best  made in China - replacement parts - Chain & sprocket manufacturer : Stainless number 50 roller chain China in Cancun Mexico  Steel Balanced Woven Wire Mesh Conveyor Belt with ce certificate top quality low price

We – EPG Group the largest Chain and agricultural gearbox factory in China with 5 different branches. For a lot more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

More importantly, we make specific areas in accordance to provided drawings/samples and warmly welcome OEM inquiries. industrial EPG is one particular of the most significant manufacturers in China. We have superior equipment for production and new engineering testing capacity . Through adopting new engineering from British, German, U.S.A, our items are ideal sellers all over European, The usa, and Southeast Asia.components such as roller chains. Roller chains are obtainable in common, nickel plated & stainless steel supplies in pitch dia. ranging from 1/4 in. to 3 in. Sorts contain leaf chains in lacing configurations ranging from 2 x 2 to 8 x 8. Leaf chains are obtainable in pitch sizes ranging from 1/2 in. to 2 in., pin dia. ranging from .156 in. to .687 in. & tensile strengths ranging from 4,000 lbs. to 156,000 lbs. Applications include agricultural, conveyors, drilling, electronics assembly, food processing, fork carry vans, hoists, packaging & textile equipment. We assist a nationwide base of Industrial Distributors, and First Tools Manufacturers as nicely as Agricultural Products Producers and Wholesalers. Positioned in Memphis, TN we are at the centre of one particular of the biggest distribution hubs in the place and with our comprehensive inventory ranges and limitless delivery choices, we are in a position to supply our buyers with precise on-time deliveries.

Stainless steel is the ideal solution for your woven mesh needs. By picking stainless metal you will utilise its numerous positive aspects including:
 Long time period overall performance
 Minimal servicing
 Strength
 Life cycle costing
 Low environmental impact
Stocked Product Technical specs all set for identical working day despatch

Mesh 500 inch per lineal inch (good mesh) to 1 inch for each lineal to (coarse mesh)
Weave Simple, Twill, Lock Crimp & Inter Crimp Weave
Grade 304 & 316
Duration x Width 2m Rol EPT / Sheets x 1245mm width
10m length x 1550mm width rolls
30m size x 1245mm, 1550mm and 1830mm width rolls

Stainless Steel Wire Mesh
Stainless metal wire mesh is employed industrially today in filters, sieve and screening and so on, as nicely as in the locations like automobile, chemical substances, foods, electronics and aerospace industries. 

Available in Stainless steel 302 304 316 316L
Mesh Guage Wire dia (mm)
eight
 
24 .558
26 .457
27 .four hundred
28 .376
ten
 
24 .558
26 .457
28 .376
12

 

24 .558
26 .457
27 .400
28 .376
thirty .315
14
 
24 .558
26 .457
27 .four hundred
sixteen
 
27 .400
28 .376
30 .315
18 26 .457
28 .376
twenty
 
26 .457
28 .376
thirty .315
32 .274
30
 
thirty .315
32 .274
34 .234
forty
 
32 .274
33 .254
34 .234
36 .193
37 .173
50

 

34 .234
36 .193
38 .152
60
 
34 .234
38 .152
80
 
38 .152
40 .122
forty two .102
100
 
forty one .112
42 .102
43 .091
two hundred 47 .051
three hundred forty eight .041
forty nine .031

Dutch Weave Filter Fabric
Basic Dutch Weave:
Simple Dutch Weave can accommodate high movement prices with a fairly lower strain fall.They are woven with each warp and weft wire passing over and underneath 1 wire.The weft wires are scaled-down in diameter than the warp wires and are drawn up near jointly,making a dense filtration weave.

Mesh/Inch   (warp×weft) Wire Dia.    warp×weft    (mm) Standard dimension   (μm) Effective    
location%
Weight   kg/sq.m Fabric thickness
  (mm)
7×44 .71×0.sixty three 319 fourteen.2 5.fifty five 1.97
8×45 .8×0.6 310 15.5 5.seven 2.00
8×60 .63×0.forty five 296 20.three 4.16 1.53
8×85 .45×0.315 275 27.three 2.73 one.08
10×90 .45×0.28 249 29.two two.57 1.01
10×76 .5×0.355 248 21.8 three.24 one.21
12×86 .45×0.315 211 twenty.9 2.93 1.08
12×64 .56×0.40     211 16. three.89 1.36
12×76 .45×0.355 192 15.9 3.26 1.16
14×100 .40×0.28 182 20.3 2.sixty two .96
14×110 .4×0.25 177 22.two 2.28 .855
14×76 .45×0.355 173 14.three three.33 one.sixteen
16×100 .40×0.28 a hundred and sixty 17.seven two.7 .96
17×120 .355×0.224 a hundred and fifty five 22.4 two.19 .803
16×120 .28×0.224 one hundred forty five 19.2 one.ninety seven .728
20×140 .315×0.20 133 21.5    1.97 .715
20×170 .25×0.sixteen a hundred thirty 28.nine 1.fifty six .57
20×110 .355×0.twenty five 126 15.3 2.47 .855
22×120 .315×0.224 one hundred fifteen fifteen.five 2.twenty .763
25×140 .28×0.twenty a hundred fifteen.two 1.ninety six .68
24×110 .355×0.twenty five ninety seven 11.3 two.sixty .855
28×150 .28×0.18 ninety two fifteen.nine one.87 .sixty four
30×150 .25×0.eighteen 82 thirteen.five one.seventy nine .61
30×140 .315×0.twenty 77 eleven.four 2.21 .715
35×190 .224×0.fourteen 74 16.eight one.forty seven .504
35×170 .224×0.sixteen sixty nine 12.8 1.sixty two .544
40×200 .18×0.a hundred thirty five 63 fifteen.four one.24 .forty three
50×250 .14×0.11 fifty fifteen.2 1 .36
60×500 .14×0.055 fifty one 34.one .70 .252
50×270 .14×0.10 50 fifteen.two .98 .34
65×390 .125×0.071 forty two 19.1 .seventy eight .267
60×300 .14×0.09 41 fourteen.one .96 .32
80×700 .125×0.04 forty 38.one .sixty .205
60×270 .14×0.10 39 eleven.2 one.03 .34
77×560 .14×0.05 38 27.5 .seventy four .24
70×390 .112×0.071   37 16.three .74 .254
65×750 .10×0.036 36 37.1 .43 .172
70×340 .125×0.08 35 thirteen.2 .86 .285
80×430 .125×0.063 32 16.6 .seventy seven .251
118×750 .063×0.036   23 21.five .38 .135

Twill dutch weave
The phrase “Twill” indicates the warp and weft wire pass alternately over two and underneath two wires.The phrase”Dutch” refer to the use of a heavier warp wire in conjunction with a lighter weft wire.
In a Twill Dutch Weave the weft wires are drawn up so tightly that there is usually a weft wire earlier mentioned and beneath the warp wires,creating a weave with the warp wire completely protected,The stream-go geometry is incredibly tortuous,allowing sensible movement costs while insuring outstanding particle dimension retention.

Mesh/Inch   (warp×weft) Wire Dia.    warp×weft    (mm) Standard dimension   (μm) Powerful    
area%
Weight kg/sq.m Fabric thickness
  (mm)
20×270 .25×0.2 119 17.6 3.fourteen .sixty five
20×200 .355×0.28 118 twelve.one four.58 .915
24×300 .28×0.eighteen one hundred ten 19.six three.01 .64
20×150 .45×0.355 one zero one 7.5 6.02 one.16
30×340 .28×0.sixteen 89 seventeen.9 two.84 .sixty
30×270 .28×0.twenty seventy seven 11.two three.forty one .68
40×540 .18×0.10 70 23.5 1.seventy three .38
40×430 .18×0.one hundred twenty five sixty three fifteen.four 2.09 .43
50×600 .125×0.09 51 17.two one.forty seven .305
50×500 .14×0.11 forty seven 12 1.eighty three .364
65×600 .14×0.09 36 one.fifty nine 0.32
70×600 .14×0.09 31 10.one one.sixty one
78×760 .112×0.071 thirteen.5 1.25 .254
78×680 .112×0.08 29 10.three one.37 0.272
80×680 .112×0.08 28 nine.8 one.38
90×850 .10×0.063 26 twelve.seven 1.twelve .226
90×760 .10×0.071 24 9.6 1.23 .242
100×850 .10×0.063 22 ten 1.14 .226
130×1500 .063×0.036 21 18.six .64 .135
100×760 .10×0.071 20 seven.4 1.25 .242
130×1200 .071×0.045 18 twelve .80 .161
130×1100 .071×0.05 17 nine.four .87 .171
150×1400 .063×0.04 15 11.4 .seventy one .143
160×1500 .063×0.036 12.4 0.67 0.a hundred thirty five
165×1500 .063×0.036 fourteen 11.4
174×1700 .063×0.032 13 12.nine .62 .127
165×1400 .063×0.04 8.8 .seventy three 0.143
174×1400 .063×0.04 eleven 7.4 .seventy four
203×1600 .05×0.032 10 9.3 .58 .114
216×1800 .045×0.03 nine.4 .fifty three .one zero five
203×1500 .056×0.036 nine 6.2 .67 .128
250×1900 .04×0.571 8 7.eight .51 .096
250×1600 .05×0.032 three.8 .63 .114
285×2100 .036×0.571 7 7.2 0.forty four 0.086
300×2100 .036×0.571 6 6.
317×2100 .036×0.571 five four.seven
325×2300 .036×0.571 4 four.2
363×2300 .032×0.571 four.5 .forty .076
400×2700 .571×0.02 4.seven .36 .068
500×3500 .571×0.015 three four.9 .thirty .055

Reverse Dutch Weave
Reverse dutch weave is a single of unique weave wire fabric utilised in the filtration field of plastic sector,chemical sector,and so forth.Comparing with the normal dutch weave,warp wire are much a lot more than the weft wires in certain unit area,with a massive absolute ratio,so this weave can supply better filtration price.
Material:302/304/316L and so forth.stainless metal
(We can items with specific materia EPT in accordance to customer’s demands)
Mesh(m):forty five-720
Width(m):.097-1.2
Length:10-30(we can items with particular specs in accordance to customer’s needs)

Mesh Wire diameter(mm) Filtering accuracy
63×18 .30×0.four two hundred
107×20 .24×0.four one hundred fifty
175×44 .15×0.30 eighty
132×32 .20×0.forty one hundred and five
290×70 .09×0.twenty fifty five
615×102 .04×0.16 40
720×140 .035×0.eleven fifteen
(Specific specification we can generate in accordance to customer’s needs)

Filter belt
StHangZhourd technical parameters
Powerful area of mesh:113(Can be adju EPT in accordance to the requirements)
Filtering precision:300-70μ.m.(Can be adju EPT in accordance to the mesh)
Duration of mesh:10m/20m
Width of mesh:127mm.(Can be alter)
Thickness of mesh:2.5mm.(Can be change)
Maximum allowable functioning pressure:380 bar
Advantages:
Continuous function,DO not want cease for perform,Help save the time and labor
Relevant in a selection of extruders
Continual soften stress to ensure the be EPT top quality goods
Applicable to a assortment of materials,such as PP,HDPE,LDPE,PS,and so on.
Very prolonged service existence
Easy to function

Mesh Wire Diameter (mm) Thickness  (mm) Width        (cm)
45×15 .45×0.6  1.seventy five 8-85
72×15 .45×0.55 one.7 8-85
120×16 .35×0.45  1.36 eight-85
132×17 .3×0.45 1.three eight-eighty five
152×24 .3×0.forty 1.2 eight-eighty five
160×18 .28×0.45  1.27 8-eighty five
200×40 .15×0.27 .seven eight-a hundred thirty
260×40 .15 x0.27  0.sixty five 8-130
300×40 .15 x0.27  0.65 eight-130
360×40 .13 x0.27 .six 8-one hundred thirty
Special specification we can produce in accordance to customer’s requirements 

 

The use of authentic products manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our organization and the shown substitute areas contained herein are not sponsored, accepted, or created by the OEM.

Best  made in China - replacement parts - Chain & sprocket manufacturer : Stainless number 50 roller chain China in Cancun Mexico  Steel Balanced Woven Wire Mesh Conveyor Belt with ce certificate top quality low price

Best  made in China - replacement parts - Chain & sprocket manufacturer : Stainless number 50 roller chain China in Cancun Mexico  Steel Balanced Woven Wire Mesh Conveyor Belt with ce certificate top quality low price

Best  made in China - replacement parts - Chain & sprocket manufacturer : Stainless number 50 roller chain China in Cancun Mexico  Steel Balanced Woven Wire Mesh Conveyor Belt with ce certificate top quality low price

Best  made in China - replacement parts - Chain & sprocket manufacturer : Stainless number 50 roller chain China in Cancun Mexico  Steel Balanced Woven Wire Mesh Conveyor Belt with ce certificate top quality low price

China Chain and sprocket factory : Transmission bmw n52 drive belt replacement in Firozabad India Conveyor Motorcycle Bicycle Chain Roller Chain with ce certificate top quality low price

China Chain and sprocket factory : Transmission bmw n52 drive belt replacement  in Firozabad India  Conveyor Motorcycle Bicycle Chain Roller Chain with ce certificate top quality low price

We – EPG Group the largest Chain and agricultural gearbox manufacturing facility in China with 5 distinct branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

EPG has been successfully licensed by ISO9002 Top quality Administration Method, ISO9001 Top quality Administration Technique, API certification, ISO/TS16949:2002 and ISO10012 measurement administration method. ISO Service & Good quality controlWe provide detailed drawings and provide each time required.9001 qualified company of precision roller chains. Kinds consist of one and a number of strand, hollow pin, aspect bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless metal, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. factory of roller chains. Conveyor chains, engineered chains, silent chains, and tabletop chains are also offered. Other electrical power transmission goods contain pillow blocks, conveyor idlers, conveyor pulleys, generate shafts, equipment racks, equipment reducers, gears, overrunning clutches, motor bases, pulleys, screw conveyors, shaft couplings, sheaves, speed reducers, sprockets, tapered bushings, tensioners, torque limiters, and universal joints. Services this sort of as bearing reconditioning and fix, ball screw repair, custom deal machining, gearbox restore and overrunning clutch mend solutions are available. Roller chains can be used in conveyor and machinery manufacturing, industrial processing, equipment rebuilding, squander water, sand and gravel, device and die, metal, metals and scrap processing industrial apps.

Transmission EPT Motorcycle/Bicycle Chain Roller Chain

Technical specs

Strategy Remedy

1

Shot Peening

eight

Quenching

2

Bluing

nine

Tempering

three

Phosphate

10

Oiling

four

Nickel-plated

eleven

Greasing

five

Zincing

twelve

Specific color

six

Warmth Therapy

thirteen

Stain proofing

seven

Carburizing

fourteen

Pre-stretched and anti-fatigue

Speak to data:

Packege and delivery

Deal one) EPT deal + carton package deal 2)Carton package + pallet 3)Wood deal + pallet
 Delivery Time one-3 days right after get
 Shipping by air to door handle / by sea to sea port

Firm Info

HangZhou EPT Bearing Imp. & Exp. Co., Ltd. is specialized in bearings export manufacturing promoting and after-services.

In exercise for many many years, we proven strict high quality assurance method.

Our products addresses Roller Bearing, Ball Bearing, Linear bearing, Rod end bearing, Joint bearing, Stainless Steel Bearings, Ceramic bearings, Plastic bearing, Skinny wall bearing, Excavator bearing, and Rotor bearing.

We do brands:N EPT NTN KOYO NACHI ASAHI IKO THK UBC NMB and DPI.

We do OEM service

The use of original products manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our business and the detailed replacement parts contained herein are not sponsored, accredited, or manufactured by the OEM.

China Chain and sprocket factory : Transmission bmw n52 drive belt replacement  in Firozabad India  Conveyor Motorcycle Bicycle Chain Roller Chain with ce certificate top quality low price

China Chain and sprocket factory : Transmission bmw n52 drive belt replacement  in Firozabad India  Conveyor Motorcycle Bicycle Chain Roller Chain with ce certificate top quality low price

China Chain and sprocket factory : Transmission bmw n52 drive belt replacement  in Firozabad India  Conveyor Motorcycle Bicycle Chain Roller Chain with ce certificate top quality low price

China Chain and sprocket factory : Transmission bmw n52 drive belt replacement  in Firozabad India  Conveyor Motorcycle Bicycle Chain Roller Chain with ce certificate top quality low price

Stainless made in China – replacement parts – agricultural chain in china in Oujda Morocco Steel 304 Food Grade Chain Conveyor Belt with ce certificate top quality low price

Stainless  made in China - replacement parts - agricultural chain in china  in Oujda Morocco  Steel 304 Food Grade Chain Conveyor Belt with ce certificate top quality low price

We – EPG Team the biggest Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For a lot more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

More importantly, we make specific elements according to provided drawings/samples and warmly welcome OEM inquiries. As Our merchandise are manufactured by present day computerized equipment and products.a specialised supplier of a total variety of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….a result, we have grow to be a thorough company in the motion and management field supplying an comprehensive lineup of items with superior longevity, setting-friendliness, and top quality. Roller Chain ANSI Standard • British Normal • Weighty-Responsibility • Excessive-Responsibility • Super Hefty Series • Cottered or Riveted • Numerous Strand • Stainless Metal • Nickel Plated • Dacroclad™ • Extended Pitch (Like Big Roller) • 81X, 81XH, 81XHH • Hollow Pin • Agricultural (CA550, CA620, etc.) • Citrus Chain                           Professional stainless metal 304 punching chain plate connected conveyor belt
Content:Stainless steel 304 (food quality )
Variety: Chain Url Mesh Weave Wire Mesh,sorts of food conveyor belt
These kinds of as adhere to:
one.harmony weave wire mesh belt
2.chain conveyor belt ,spiral conveyor belt
3.belt with facet guard, food baking mesh belt
four.rapid freezing mesh belt
five.spiral cooling tower etc .

 

Characteristics: 
1.sleek managing

2.simple to preserve,durable .

3.constantly equipped with side chains,the chains are secured by a ring weldedat the cross rods finishes .

Software : 1. excellent for conveying little merchandise,

                     2. conveying gravity merchandise such as bicycle ,machinery and so forth.

We have abundant manufacture experience for fourteen several years ,  leader technological innovation R&D .

Welcome to our factory .

 

1. What are our main products?

1) fruit and vegetable washing equipment

2)  EPT dryer

3) Roller conveyor

four) Pvc belt conveyor

five) Mesh belt conveyor

6) Chain plate conveyor

7) Roller chain 

8) Chain sprockets

9) Metal wire conveyor belt

 two. What sort of payment phrase we acknowledge?

 10)  When the payment is significantly less than 10000$,   Pay in entire before delivey.

eleven)  When the payment is not significantly less than 10000$,. 

twelve) 1.The typical items: T/T 30% as a deposit, harmony 70% just before shipping

thirteen) 2. Tailored goods: fifty%~70% as a deposit,  balance payment ahead of delivery.

 3.Need to we use our possess manufacturer/brand?

14)  Yes, of program. OEM is completely supported.

 4. What certificates do you have?

ISO CE

fifteen) Many certification for the excellent production quality

 five.What is actually our phrases of shipping and delivery?

16) EXW, FOB,CIF ,  are accessible

6.How about the right after-support?

seventeen)  If deal is broken during transport, remember to refuse and contact the provider.

eighteen) If any issue during use, remember to really feel free to speak to us and we will reply you inside 24 several hours.

Contact Detai EPT : Linda song 
Mobile: +86~13083988828/ : -1886676 
 

 
 

The use of unique equipment manufacturer’s (OEM) element quantities or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the detailed substitution components contained herein are not sponsored, accredited, or created by the OEM.

Stainless  made in China - replacement parts - agricultural chain in china  in Oujda Morocco  Steel 304 Food Grade Chain Conveyor Belt with ce certificate top quality low price

Stainless  made in China - replacement parts - agricultural chain in china  in Oujda Morocco  Steel 304 Food Grade Chain Conveyor Belt with ce certificate top quality low price

Stainless  made in China - replacement parts - agricultural chain in china  in Oujda Morocco  Steel 304 Food Grade Chain Conveyor Belt with ce certificate top quality low price

Stainless  made in China - replacement parts - agricultural chain in china  in Oujda Morocco  Steel 304 Food Grade Chain Conveyor Belt with ce certificate top quality low price

Stainless  made in China - replacement parts - agricultural chain in china  in Oujda Morocco  Steel 304 Food Grade Chain Conveyor Belt with ce certificate top quality low price

Plastic made in China – replacement parts – roller chain machine design China in Novosibirsk Russian Federation Conveyor Modular Belt Chain Connection Parts Accessories with ce certificate top quality low price

Plastic  made in China - replacement parts - roller chain machine design China in Novosibirsk Russian Federation  Conveyor Modular Belt Chain Connection Parts Accessories  with ce certificate top quality low price

We – EPG Group the biggest Chain and agricultural gearbox manufacturing facility in China with 5 distinct branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

Fantastic focus has been paid out on environmental protection and strength conserving. Common Each method, every part, each and every operate in EPG is demanded to be completed one particular action adhering to yet another, carefully and cautiously, from substance variety, reformation to production add-ons, from elements heat therapy to computerized assembly, from high quality handle to product inspection and screening and from purchase working to following revenue support.roller chain is accessible with pitches from 1/2 to 3 inches. Chain quantities are decided by multiplying the pitch by 80 (a 1/2 inch pitch chain would be a No. forty chain). A hyphenated suffix implies multiple strands. ISO 9001:2015 accredited company and distributor of roller chains. Kinds of roller chains consist of ASME/ANSI normal chains, attachment chains, corrosion resistant chains, lube-free of charge chains, plastic chains, totally free-movement chains, specialty chains and British common chains. ASME/ANSI normal chains are obtainable in large and little pitch, double pitch and leaf designs. Roller chains are utilized in foodstuff packaging, forklift trucks, oilfield drilling, bikes, conveyors and energy transfer apps.

Positive aspects:
1. we are professional conveyor system maker, our merchandise line contain: modular belt, slat leading chain, conveyor spare components, conveyor system.
two.practical to assembly and sustain
three.all colors could be obtainable
4. minimal value with exceptional high quality and substantial performance 
five. excellent deal, protected and fast delivery.
6. reputable soon after-sale service.
7. each items can be customized 

Principal software:      
one.Food items,gentle drinks applications
two.Packaging &can producing
3.Pulses and granular items
4.A variety of dip tank purposes
5.Tobacco,medication&chemical sector
6.Electronics,Car: +86~13083988828s and logistics, and many others
 
More goods checklist

Stainless steel 
prime chain
Transmission conveyor 
Machine
Plastic slat leading chains
Multiflex conveyor chains Adaptable chains Plastic modular belt
Plastic Changeover Boards Driving Sprockets EPT part

 
ZheJiang EPT Transmission Equipment Shares Co.,Ltd 
Fir EPT Listed Company In China EPT Industry
China Huge EPT EPT Equipment Provider
 
ZheJiang EPT Transmission Gear Co. Ltd is an integrated company
engaged in the analysis & development, style, manufacture and sale of 
automation gear, chain scraper conveyors, etc. 
 
It was recognized in 2004, our export proportion is about eighty one%-ninety% each year. On the operation basic principle of “Good quality Dependent and Services Initial”, we has cooperated with some properly-recognized domestic and foreign enterprises.

FAQ
one.I do not know what belt I currently have. Can you help me identify my belt?
   Our on-line belt identifier can assist you slender down the sequence and type of your current belt. If you want far more certain info on your belt, contact me freely
 
2.Does EPT offer PDF files of items?
  Yes, in our download center  you can uncover PDF data files for a large variety of our goods.
  If you can not discover what you are hunting for ,ship me your reque EPT by e mail.
 
3.What can you do If the products have been damaged?
 (1.)If products had been broken once you purchased from me, I would substitute them freely
(2.)If the items had been broken when you used, We could offer 1 year good quality assure below widespread functioning surroundings.
 
 

Contact Me
Title Erin
Cell: +86~13083988828 -21-67636993 Ext 8011
Mob -18964531323
Fax -571-51687578
  Erinyein
  -18964531323
Website http://

 
 

The use of authentic gear manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our firm and the outlined substitution parts contained herein are not sponsored, approved, or made by the OEM.

Plastic  made in China - replacement parts - roller chain machine design China in Novosibirsk Russian Federation  Conveyor Modular Belt Chain Connection Parts Accessories  with ce certificate top quality low price

Plastic  made in China - replacement parts - roller chain machine design China in Novosibirsk Russian Federation  Conveyor Modular Belt Chain Connection Parts Accessories  with ce certificate top quality low price

Plastic  made in China - replacement parts - roller chain machine design China in Novosibirsk Russian Federation  Conveyor Modular Belt Chain Connection Parts Accessories  with ce certificate top quality low price

Plastic  made in China - replacement parts - roller chain machine design China in Novosibirsk Russian Federation  Conveyor Modular Belt Chain Connection Parts Accessories  with ce certificate top quality low price

Plastic  made in China - replacement parts - roller chain machine design China in Novosibirsk Russian Federation  Conveyor Modular Belt Chain Connection Parts Accessories  with ce certificate top quality low price