Tag Archives: wheel roller chain

China Best Sales High-Precision Processing Customization Large Pitch Carbon Steel Conveyor Roller Chain Industrial Driving and Driven Chain Wheel and Sprocket

Product Description

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

INSTALLATION AND USING

The chain wheel, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.
Certificates

Service Market:

Company Files

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

wheel sprocket

Compatibility of Chain Sprockets with Wheels

In general, chain sprockets are designed to work with specific types of wheels, and there are certain requirements for ensuring proper compatibility:

  • Chain Size and Pitch: The chain sprocket must match the size and pitch of the chain it is intended to work with. For example, if you have a roller chain with a pitch of 0.625 inches, you need a sprocket with the same pitch to ensure a proper fit.
  • Number of Teeth: The number of teeth on the sprocket should be compatible with the number of chain links. The chain should mesh smoothly with the sprocket without any binding or skipping.
  • Tooth Profile: The tooth profile of the sprocket should match the shape of the chain’s rollers to ensure smooth engagement and minimize wear.
  • Shaft Size: The center hole (bore) of the sprocket should match the diameter of the shaft it will be mounted on. Using the correct shaft size ensures a secure fit and prevents wobbling.
  • Hub Configuration: Some sprockets have hubs, which are extensions on either side of the sprocket. The hub’s length and configuration should match the requirements of the specific application.
  • Material and Strength: Consider the material and strength of the sprocket based on the application’s load and environmental conditions. Heavy-duty applications may require sprockets made of robust materials to withstand the forces and stresses.

It’s crucial to follow the manufacturer’s specifications and guidelines when selecting a chain sprocket for a particular wheel. Mixing incompatible sprockets and wheels can result in premature wear, inefficiencies, and potential safety hazards. If you are unsure about the compatibility, consult with the manufacturer or a knowledgeable expert to ensure you choose the right sprocket for your specific application.

wheel sprocket

Vertical Power Transmission with wheel sprocket System

Yes, a wheel sprocket system can be used for vertical power transmission. In such cases, the system is designed to transmit power and motion between vertically aligned shafts. Vertical power transmission using a wheel sprocket assembly follows similar principles to horizontal transmission, but there are some factors to consider:

  1. Load and Torque: When transmitting power vertically, the weight of the load can significantly impact the torque requirements. The torque must be sufficient to lift the load against gravity while accounting for friction and other resistive forces.
  2. Sprocket Selection: Choosing the right sprocket is critical for vertical transmission. The sprocket teeth must be designed to engage the chain or belt effectively and prevent slipping, especially when lifting heavy loads.
  3. Lubrication: Proper lubrication is essential to reduce friction and wear in the system. Vertical applications may require specific lubricants to ensure smooth operation and prevent premature failure.
  4. Tensioning: Maintaining the correct tension in the chain or belt is crucial for vertical power transmission. Proper tension helps prevent sagging and ensures proper engagement between the wheel sprocket.
  5. Overhung Load: In vertical setups, the weight of the sprocket and shaft assembly can impose an overhung load on the bearings. Adequate support and bearing selection are necessary to handle this load.

Vertical power transmission with a wheel sprocket system is commonly used in various applications, including conveyor systems, elevators, and some industrial machinery. Proper design, installation, and maintenance are essential to ensure safe and efficient operation in vertical configurations.

wheel sprocket

Role of a wheel sprocket in a Mechanical System

In a mechanical system, a wheel sprocket play a crucial role in transferring motion and power from one component to another. They are essential elements of various machines and mechanisms, such as bicycles, conveyor systems, automobiles, and industrial machinery. Let’s explore their functions in more detail:

1. Wheel:

The wheel is a circular component with a central shaft (axle) that allows it to rotate freely around the axle’s axis. Its primary functions include:

  • Motion Transmission: When a force is applied to the wheel’s outer edge, it rotates around the axle, enabling the transfer of linear motion into rotational motion.
  • Load Bearing: The wheel’s structure and material are designed to support and distribute the load placed on it, allowing smooth movement over various surfaces.
  • Reduction of Friction: By using wheels, the friction between the moving object and the ground is significantly reduced, making it easier to move heavy loads with less effort.
  • Directional Control: Wheels can be attached to steering mechanisms to control the direction of movement in vehicles and other equipment.

2. Sprocket:

A sprocket is a toothed wheel designed to mesh with a chain or a belt, facilitating motion transfer between the sprocket and the chain/belt. Its key functions include:

  • Power Transmission: When rotational force (torque) is applied to the sprocket, the teeth engage with the links of the chain or belt, transferring motion and power from one sprocket to another.
  • Speed and Torque Conversion: Different-sized sprockets can be used to adjust the speed and torque of the driven component in a mechanical system.
  • Positive Drive: The teeth on the sprocket and the links on the chain/belt create a positive drive system, reducing the likelihood of slippage or loss of power during operation.
  • Chain/Belt Tensioning: Sprockets help maintain proper tension in the chain or belt, ensuring optimal performance and longevity of the power transmission system.

Together, wheels and sprockets form a vital part of mechanical systems, enabling efficient motion transmission, power transfer, and control in a wide range of applications across various industries.

China Best Sales High-Precision Processing Customization Large Pitch Carbon Steel Conveyor Roller Chain Industrial Driving and Driven Chain Wheel and Sprocket  China Best Sales High-Precision Processing Customization Large Pitch Carbon Steel Conveyor Roller Chain Industrial Driving and Driven Chain Wheel and Sprocket
editor by CX 2024-02-16

China Custom Chains Wheel Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains China High-Intensity Chain Gear and High Wear Resistance Chain Sprocket

Product Description

SPROCKET  5/8” X 3/8”  10B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

Notice: *welding hub

BASIC INFO.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

INSTALLATION AND USING

The chain  spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard, Nonstandard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear, Cut Gear
Toothed Portion Shape: Spur Gear
Material: 1045, Stainless Steel
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

wheel sprocket

Compatibility of Chain Sprockets with Wheels

In general, chain sprockets are designed to work with specific types of wheels, and there are certain requirements for ensuring proper compatibility:

  • Chain Size and Pitch: The chain sprocket must match the size and pitch of the chain it is intended to work with. For example, if you have a roller chain with a pitch of 0.625 inches, you need a sprocket with the same pitch to ensure a proper fit.
  • Number of Teeth: The number of teeth on the sprocket should be compatible with the number of chain links. The chain should mesh smoothly with the sprocket without any binding or skipping.
  • Tooth Profile: The tooth profile of the sprocket should match the shape of the chain’s rollers to ensure smooth engagement and minimize wear.
  • Shaft Size: The center hole (bore) of the sprocket should match the diameter of the shaft it will be mounted on. Using the correct shaft size ensures a secure fit and prevents wobbling.
  • Hub Configuration: Some sprockets have hubs, which are extensions on either side of the sprocket. The hub’s length and configuration should match the requirements of the specific application.
  • Material and Strength: Consider the material and strength of the sprocket based on the application’s load and environmental conditions. Heavy-duty applications may require sprockets made of robust materials to withstand the forces and stresses.

It’s crucial to follow the manufacturer’s specifications and guidelines when selecting a chain sprocket for a particular wheel. Mixing incompatible sprockets and wheels can result in premature wear, inefficiencies, and potential safety hazards. If you are unsure about the compatibility, consult with the manufacturer or a knowledgeable expert to ensure you choose the right sprocket for your specific application.

wheel sprocket

Using wheel sprocket Assembly in Robotics and Automation

Yes, wheel sprocket assemblies are commonly used in robotics and automation systems to transmit power and facilitate movement. These systems offer several advantages for robotic applications:

  • Efficiency: wheel sprocket assemblies provide efficient power transmission, ensuring smooth and precise movement of robotic components.
  • Compact Design: The compact nature of sprockets and wheels allows for space-saving designs, making them ideal for robotic applications where space is limited.
  • Precision: Sprockets and wheels with accurate teeth profiles provide precise motion control, crucial for robotics and automation tasks that require high levels of accuracy.
  • Low Noise: Properly lubricated and maintained wheel sprocket systems generate minimal noise during operation, contributing to quieter robotic movements.
  • Customizability: wheel sprocket assemblies can be customized to suit specific robotic requirements, such as different gear ratios, sizes, and materials.
  • Multiple Configurations: Depending on the robotic application, different configurations like single or multiple sprockets, idler sprockets, or rack and pinion systems can be used.
  • High Load Capacity: Sprockets made from durable materials like steel can handle substantial loads, making them suitable for heavy-duty robotic tasks.

Examples of robotics and automation systems that commonly use wheel sprocket assemblies include:

  • Robotic Arms: wheel sprocket systems are utilized in robotic arms to control their movement and reach.
  • Automated Guided Vehicles (AGVs): AGVs use wheel sprocket assemblies for propulsion and steering, enabling them to navigate autonomously.
  • Conveyor Systems: In automated factories, conveyor belts are often driven by sprockets and wheels for efficient material handling.
  • Mobile Robots: Wheeled mobile robots use wheel sprocket assemblies to drive their wheels, enabling them to move in various directions.
  • Robot Grippers: wheel sprocket mechanisms can be integrated into robot grippers to facilitate gripping and handling objects.

The choice to use wheel sprocket assemblies in robotics and automation depends on the specific application requirements, load capacity, precision, and environmental conditions. By selecting the appropriate sprockets, wheels, and materials, engineers can ensure reliable and efficient robotic performance in a wide range of automated tasks.

wheel sprocket

Calculating Gear Ratio for a wheel sprocket Setup

In a wheel sprocket system, the gear ratio represents the relationship between the number of teeth on the sprocket and the number of teeth on the wheel. The gear ratio determines the speed and torque relationship between the two components. To calculate the gear ratio, use the following formula:

Gear Ratio = Number of Teeth on Sprocket ÷ Number of Teeth on Wheel

For example, if the sprocket has 20 teeth and the wheel has 60 teeth, the gear ratio would be:

Gear Ratio = 20 ÷ 60 = 1/3

The gear ratio can also be expressed as a decimal or percentage. In the above example, the gear ratio can be expressed as 0.3333 or 33.33%.

It’s important to note that the gear ratio affects the rotational speed and torque of the wheel sprocket. A gear ratio greater than 1 indicates that the sprocket’s speed is higher than the wheel’s speed, resulting in increased rotational speed and reduced torque at the wheel. Conversely, a gear ratio less than 1 indicates that the sprocket’s speed is lower than the wheel’s speed, resulting in decreased rotational speed and increased torque at the wheel.

The gear ratio is crucial in various applications where precise control of speed and torque is required, such as bicycles, automobiles, and industrial machinery.

China Custom Chains Wheel Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains China High-Intensity Chain Gear and High Wear Resistance Chain Sprocket  China Custom Chains Wheel Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains China High-Intensity Chain Gear and High Wear Resistance Chain Sprocket
editor by CX 2024-02-11

China supplier Custom Design Driven Roller Chain Idler Sprocket wheel and sprocket

Product Description

Yuchen power tramsmission offer all the sprocket 
Product Description
1. American Standard, European Standard, Japanese Standard
2. Pilot bore, finished bore, taper bore and special bore available
3. Bright surface and high precision
4. Advanced heat treatment and surface treatment crafts
5. Better quality and competitive price.
6. Material C45(1045), low carbon steel, 40Cr, 20CrMnTi, stainless steel such as SS316L, SS316, SS304, SS420, copper etc. available
7. Standard sea worthy package to Europe and American
8. High speed digital gear hobbing machines to guarantee the teeths quality
9. Corrosion resistance treatment available
10. Control on tolerance and easy to install
11. Good material and good treatment to make sure long life span
12. OEM/ODM welcome
Product show
   

  

   

     

Manufacture process

Business type Manufacturer & Exporter
Main export market Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa
Material C45, low carbon steel, 40Cr, cast iron, stainless steel, copper etc
Manufacturing method Forged and then machined, hobbed, if need can also weld
Heat treatment High frequency quenching and so on
Surface treatment Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on
Model Type A & Type B, Single, Double, Triple – 35B10-80,40B9-90,50B9-90,60B9-90,80B9-90,100B9-90,120B9-80,140B10-60,160B10-60;06B10-125,08B9-125,10B9-125,12B9-125,16B9-125,20B9-114,24B9-90,28B9-76,32B9-76, and other sprocket to fit with conveyor chain, transmission chain
Packing Plywood Case/Pallet

 
   

 

FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in single color box. If you have special request about packing, pls negotiate with us in advance, we can pack the goods as your request.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance. Other payments terms, pls negotiate with us in advance, we can discuss.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.We welcome sample order.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.
 

Standard Or Nonstandard: Nonstandard
Application: Motor, Electric Cars, Motorcycle, Machinery, Toy, Agricultural Machinery
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Sprocket
Material: Carbon Steel
Samples:
US$ 0.6/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket

What is a sprocket?

A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.

ISO sprocket uniformity

ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.

metal sprocket

Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.
sprocket

plastic sprocket

Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.
sprocket

Aluminum sprocket

Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
China supplier Custom Design Driven Roller Chain Idler Sprocket     wheel and sprocketChina supplier Custom Design Driven Roller Chain Idler Sprocket     wheel and sprocket
editor by CX 2023-07-13

China supplier Stainless Steel Idler Taper Transmission Drive Gear Wheel Roller Chain and Sprockets with Best Sales

Product Description

Business type

Manufacturer & Exporter

Main export market

Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa

Material

Alloy Steel, Carbon Steel, Stainless Steel,Aluminum, Copper, Brass

Manufacturing method

Forged and then machined, hobbed, if need can also weld

Heat treatment

Hardening and Tempering, High Frequency Quenching, Carburizing Quenching

Surface treatment

Oxide black, Galvanized, Nickel plated, Chrome plated,Painted and so on

Model

ANSI: 25/35/41/40/50/60/80/100/120/140/160/180/200/240

DIN/ISO:04C/06C/085/08A/10A/12A/16A/20A/24A/28A/32A/36A/40A/48A

DIN/ISO:04B/05B/06B/08B/10B/12B/16B/20B/24B/28B/32B/36B/40B/48B

Process

Forging, Hobbing, Precision machining

Teeth

8T-100T

Type

Type A sprockets :Plate (without Hub)

Type B sprockets:One side with hub

Type C sprockets: Double side with hub

Finished bore sprockets:With the inner hole ,keyway and screw

1.Fast delivery: Standard products can be delivered in as fast as 20 days
2.Good service: timely reply, prompt quotation, responsible for the product
3.High cost performance: can maintain price stability for a certain period of time, bringing greater profits to customers
4.Good quality: production and testing have corresponding supervision to ensure product quality and get high praise from customers
5.OEM service: products can be customized according to drawings and requirements

We are responsible for the ordered products. We are very confident in the products we produce. Of course, if you have any problems after receiving the goods, you can contact us directly. We will confirm and negotiate in time to solve your difficulties.


 

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Samples:
US$ 35/kg
1 kg(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

sprocket

How to choose a sprocket in CZPT

Sprocket is one of CZPT mechanical villagers. It can be found at levels 50, 55, 60 and 65. Like other mechanical villagers, it has a metallic texture and occasionally makes mechanical sounds when moving. It prefers green/orange and active/simple style colors.

Pitch sprocket

When choosing a pitch sprocket, you need to consider several factors, including the pitch diameter. This affects the torque applied to the shaft and the length of the moment arm. Additionally, incorrect pitch can affect belt life and wear. The pitch diameter should be measured by wrapping the belt around the sprocket at a 180-degree angle to the rod head. You can also consult engineering guidelines and product sheets to determine proper spacing.
The pitch diameter of a sprocket is the distance from the center of the pin to the next pin in the chain. The pitch diameter also determines the size of the sprocket teeth. The larger the pitch, the larger the teeth on the sprocket.
The diameter of the pitch sprocket depends on the type of bike. If you have an older bike, you should choose a sprocket with a diameter closer to the hub. If your bike has a smaller diameter rim, you can choose a sprocket with a smaller diameter and larger caliper. In addition to the caliper diameter, you should also consider the hub diameter.
Proper pitch sprockets can last longer. They are made with hardened teeth to increase their longevity and durability. You can choose between single-purpose and dual-purpose sprockets. Single-tooth sprockets have one tooth per pitch, while double-tooth sprockets have two teeth per pitch.
A pitch sprocket is a component of a bicycle chain. It prevents the chain from shaking due to uneven load distribution. Plus, it helps the chain stay tight.

three sprockets

Triple sprockets are toothed or cogwheels that move the chain. The pitch circle diameter of the triple sprocket is two and a half inches. Most rear sprockets are made of aluminum. The quality of the aluminum sheet used to make the sprocket varies from manufacturer to manufacturer. However, CZPT only uses the best aluminium sheets on the market. The sprockets are then shaped on a hobbing machine to ensure a perfect fit with the chain. The final anodizing process improves durability and adds personalization. The manufacturing process of CZPT is a quality control process with an uncompromising commitment to perfection.
sprocket

Cone lock sprocket

Taper lock sprockets are one of several types of sprockets. It has openings in flanges and tapers, making it ideal for a variety of applications. These sprockets also have the advantage of being easy to install and remove. These sprockets are also available in pre-drilled models that are pre-drilled to fit the shaft diameter. This allows for easier installation and improved alignment. Also, you can replace the sprockets without replacing the entire gear train.
These sprockets have flame hardened teeth for extended chain and sprocket life. They also help reduce drive noise. They are available in a variety of sizes, including duplex and triplex. In addition to being made of high-quality steel, they are also available in cast iron and metric models.

Quick release sprocket

There are several different styles of quick disconnect sprockets. Typically, they come with a 2″ hole and are compatible with various welds on the hub. The Quick Disconnect (QD) style is a special style with a split design on the hub and use of torque bolts to make it easier to install. This type of sprocket is very popular in the power transmission industry.
sprocket

Irregular sprocket

Idler gears are small gears that run on the chain. This sprocket can be used for a variety of purposes and is available in a variety of configurations. Its most common configuration is a ball bearing, pre-lubricated and sealed against moisture. Other idler sprockets have needle bearings, which are more stable and can handle higher capacities. Bronze bearings are another option as they have no moving parts.
China supplier Stainless Steel Idler Taper Transmission Drive Gear Wheel Roller Chain and Sprockets     with Best Sales China supplier Stainless Steel Idler Taper Transmission Drive Gear Wheel Roller Chain and Sprockets     with Best Sales
editor by CX 2023-07-07

China supplier Direct Manufacturer Supply Conveyor Chains Sprocket Roller Chain Sprocket Wheel with Heat Treatment sprocket bar

Product Description

Product Description

Sprocket:

1. Material: C45 & Cast Iron 304 stainless steel
2. Supply standard and non standard sprockets according to European and American Standard & Drawing
3. Superior quality & Competitive price & Prompt delivery
 

Product Attribute

Product name  Sprocket
 
Surface Treatment Annealing, natural anodization, heat treatment,  polishing, nickel plating, chrome plating, znic plating,Black surface painted etc.
 
Products Available Transmission machinery such as mining machinery, agricultural machinery, engineering machinery, forestry machinery, petrochemical industry, automatic assembly lines, etc
 
material carbon steel,stainless steel, alloy steel
 
Certificate ISO,SGS,DIN,JIS
 
product type European Standard American Standard
 
Port Any sea port or airport in China
 
Brand TV OEM
 
Payment L/C, T/T, D/P, Western Union
 
Package Chain, Plastic Bag, Color Box, Wooden Case. or OEM
 
European standard  03A-1 04A-1 05A-1-2 06A-1-2-3 081A-1 083A-1/084A-1 085A-1 086A-1

08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3

28A-1-2-3 32A-1-2-3
 

03B-1 04B-1 05B-1-2 06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1

08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3

28B-1-2-3 32B-1-2-3
 

American standard  25,35,41,40,50,60,80,100,120,140,160,180,200,240

35-2,40-2,50-2,60-2,80-2,100-2,120-2,140-2,160-2,200-2

35-3 ,40-3 ,50-3 ,60-3 ,80-3, 100-3,120-3
 

We also carry out OEM according to your requirements
 

 

Detailed Photos

Product Parameters

Our Advantages

Company advantages:
Own Import & Export License, The TV trade mark registered successfully in many countries, Sales network spread all over China, Products export to 65 countries in 5 continents.

Membership:
1. The member of China General Machine Components Industry Association.
2. The member of China Chain Transmission Association.
3. The member of China Chain Standardization Association.
4. The member of China Agricultural Association Machinery Manufacturers.

With our excellent trained staffs and workers, advanced and efficient equipments, completely sales network, strict QA systems. You are confidence that our premium qualified chain can meet all customers’ specification and strictest quality standards.

Factory Display

WHY CHOOSE US

Comprehensive Product Portfolio We produce and supply a wide range of power transmission
products including drive chains, leaf chains, conveyor chains, agricultural chains, sprockets, and
couplings. This one-store-for-all shopping experience will significantly reduce your searching costs while
guarantee youfind what you want at 1 click.

Value Choice Products Our products are the best combination of quality and price, and you get what
you want within your budgets

Seasoned Sales Associates and Engineers We have 15 seasoned sales associates and 5 engineers;
on our team at your disposal any time when you need a helping hand. They are well trained with industry
know-now and will always respond to your requests within 24 hours.

100% Customer Retention Rate Our regular customers from overseas come back not just for our
premium quality products, but for the superior services that we’ve provided over the years.
 

FAQ
Q1: What’s your average lead time?
A: It varies. Our regular end-to-end lead time is 1-2 months.. We also provide express shipments for rush orders. For details,please consult our sales associate.

Q2: Is your price better than your competitors given the same quality?
A: Definitely YES. We provide the most competitive price in the power transmission industry. If price disparity exists, we’ll be more than happy to do a price match.
Q3: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.

Q4: Can we inspect the goods before shipment?
A: Yes. You or your representative or any third-party inspection party assigned is allowed access to our facility and do the inspection.

Q5: What kind of payment method is acceptable for your mill?
A: We’re flexible. We take T/T, L/C, or any other online payment methods so long as it’s applicable for you.

Q6: What if I have any other questions?
A: Whenever in doubt, you’re always encouraged to consult our sales associate any time – They will help you to your satisfaction.
 

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Standard Or Nonstandard: Standard
Application: Motorcycle, Machinery
Hardness: Hardened Tooth Surface
Customization:
Available

|

Customized Request

sprocket

Problems with sprockets

If you’re having trouble with your HP Sprocket, you’re not alone. This bike component isn’t without issues, but it’s also susceptible to other wear and tear. Check for worn tooth surfaces and hooked tips. When teeth wear out quickly, they can break the chain, so make sure you fix them as soon as possible.
You can solve this issue by installing the latest firmware update for your Sprocket printer. The firmware update is designed to provide a safe and reliable printing experience. When your Sprocket printer doesn’t print the pictures, it is likely because it’s not receiving enough power from the battery. Make sure the battery is at least 25% before you begin.
Insufficient or improper lubrication can cause a variety of problems. Proper lubrication can prevent or remove excessive wear, or protect the chain from the environment. It can also reduce the risk of excessive chain slack. The following are just a few common problems that can cause slack in the chain.
In case of excessive wear, a new sprocket may be necessary. If the sprocket and chain do not match, replace them with a similar size. In addition, a shock absorber can be installed to minimize load. Another alternative is to install a take-up idler, which helps prevent excessive chain elongation.
Improper alignment of the sprocket is another common cause of chain drive problems. If the sprocket is not aligned correctly, it will not be able to move smoothly through the chain during rotation. The teeth of the sprocket will become hooked, preventing the roller from smoothly moving through. This will force the roller chain to cling to the sprocket, and need to be replaced.

Common types of sprockets

Power transmission equipment typically utilizes sprockets and chains. These are used in pairs to provide speed reduction. They are different from gears because the teeth of the sprocket do not mesh with those of the mating gears. They are typically made of plastic, but they can also be made of metal.
There are many common types of sprockets and chains. Some of these types of sprockets have large, narrow, or variable tooth pitch. The size of the sprocket depends on the size and pitch of the chain. If you are using a chain with a large pitch diameter, you should use a sprocket with large teeth. Conversely, a smaller pitch diameter will require a sprocket with small teeth.
Another way to identify the type of sprocket you’re using is to look at the number of strands. Single-strand sprockets are the most common, but you’ll also find many types that have multiple strands of chains. Multi-strand chains are generally larger and allow for greater torque to be transmitted from a common central shaft.
Another type is flat sprockets, which have no hub and drive through a series of holes. They are used for transmission of power or material in chain-driven systems, such as bicycles. They can also be used for overhead conveyors. In some cases, there is a special type that fits the shaft of an automobile, such as a transmission shaft.
There are many different types of sprockets, each with a unique function. Some are used for conveyor chains, while others are used for other applications. In most cases, sprockets are used in chain-driven machinery. They come in different sizes and pitches and are designed to work with particular types of chains.
When choosing a motor or transmission system, it is important to match sprockets and chains. A perfectly matched set of components will ensure that the motor and transmission work together. Generally, this alignment comes down to sprocket-to-sprocket matching. The process involves jacking up the motor and lining up the sprockets and chains. Then, the sprockets and chains are locked into place with cotter pins.
sprocket

Size of sprockets

To determine the correct chain length and sprocket diameter, the first step is to understand the difference between the diameters of the sprockets and cassettes. The smaller the diameters of sprockets, the lower the chain tension. The larger the sprocket, the longer the chain will need to be. This process requires the use of a derailleur that can roll a larger number of chains.
In addition to chain length, the spacing between sprockets is another important factor. If the sprockets are too far apart, the chain may slip through the sprocket. A smaller range of sprockets will prevent this and will increase the number of discrete gear ratios. In addition, if the chain skips over a sprocket, it will cause discomfort in shifting.
Choosing the correct size of sprockets is essential for cycling. Larger sprockets are usually necessary for road bikes. Likewise, a road bike will have larger gears than a gravel bike. Larger gears will help the cyclist accelerate more smoothly and ensure a smoother ride.
Using a chain calculator can help you determine the proper size of sprockets for your bike. You can also use a chain length calculator to determine the correct chain length. This calculator uses the distance between the sprockets to calculate chain length. However, it is important to note that it is not possible to calculate the length of a chain with a single sprocket.
The size of the sprocket must be in proportion to the length of the chain. It can be controlled by either adjusting the center of the sprocket or moving it to the proper position. The center of rotation of the sprocket is defined by the chosen geometry reference.
The report covers global and regional sales of sprockets. It also contains information on competitive dynamics and market concentration status. Moreover, the report includes detailed information about the manufacturers of sprockets. The study also includes regional and global market forecasts. It also provides a detailed breakdown of sales by type, application, and region.
When choosing the right size of sprockets, remember to take measurements and do some arithmetic. For example, a smaller countershaft sprocket will improve low-speed acceleration, while a larger rear sprocket will improve fuel mileage. In addition, it is recommended that you use the reverse sprocket size if you’re going to be riding on long highways.
sprocket

Maintenance of sprockets

Proper maintenance of sprockets and chains is crucial to the functioning of your bike. It is important to avoid overstretching them. If this happens, they will not fit properly and will require replacement. It is also important to prevent the kinks in your chain to reduce the amount of stress on your sprockets.
If you are unsure of the state of your sprockets and chains, you can replace them with a new chain and a new sprocket. If you notice that a chain is squeezing between the rear sprocket, it is time to replace the sprocket.
Proper maintenance of sprockets and chains involves cleaning and lubrication. Regular cleaning and lubrication can prevent damage and extend the life cycle of these parts. Proper lubrication will also ensure their smooth operation and minimize the noise. Regardless of whether your sprockets or chains are new or used, lubrication should be carried out at regular intervals to extend their useful life cycle.
Proper alignment of the sprockets and chains will ensure the most efficient performance and reliability. If you regularly change your chain and sprockets, you can prolong the life of these components and avoid costly repairs. Make sure you change the sprockets and chains only with professional mechanics. Always follow the instructions of the motorcycle manufacturer.
Proper maintenance of sprockets and chains is important to prevent premature sprocket replacement. Changing the sprocket too often can result in poor meshing, accelerating wear and tear of the new sprockets. When changing the sprocket, it is essential to turn the worn surface over before you install the new one.
It is important to follow the instructions and warning signs for proper maintenance of sprockets and chains. The safety of the workers and the environment should be prioritized. Follow the instructions of the manufacturer and avoid dangerous situations. It is essential not to anneal or electroplate the chain parts.
Proper lubrication is also vital. Use a non-petroleum based cleaner to clean the chain thoroughly and then apply lubricant. Avoid using engine oil as it is more viscous and cannot protect the chain against water.

China supplier Direct Manufacturer Supply Conveyor Chains Sprocket Roller Chain Sprocket Wheel with Heat Treatment     sprocket barChina supplier Direct Manufacturer Supply Conveyor Chains Sprocket Roller Chain Sprocket Wheel with Heat Treatment     sprocket bar
editor by CX 2023-04-24

China Double Sprocket Roller for Double Chain Driving Roller Conveyor wheel and sprocket

Product Description

                              Single/ double row sprocket conveyor roller

 

Product Application

Gravity Roller (Light Duty Roller) is widely used in all kinds of industry, like manufacturing line, assembly line, packaging line,
conveyor machine and logistic strore.
 

Model
Roller Dia
Tube
Thickness
Shaft Dia
(mm)
Roller Length
 (mm)
Sprocket Tube Material Surface Treatment
SS38 T=1.2,1.5 φ 12 300-1000  
 
 
 
 
 
14 tooth*1/2” pitch according to customers’ requirement
 
 
 
 
 
 
Carbon Steel
Stainless Steel
PVC
 
 
 
 
 
 
Zinc Plated
Chrome Plated
SS42 T=2.0 φ12  300-1000
SS48 T=2.9 φ12 300-1000
SS50 T=1.2,1.5 φ12 300-1500
SS57 T=1.2,1.5 φ12/15 300-1500
SS60 T=1.5,2.0,3.0 φ12/15 300-1500
SS76 T=2.0,3.0 φ12/15/20 300-2000
SS80 T=3.0 φ20 300-2000
SS89 T=2.5,3.0 φ20 300-2000

 

 

                           

 

 


/ Piece
|
1 Piece

(Min. Order)

###

Material: Steel
Application: Chemical Industry, Grain Transportation, Mining Transport, Power Plant, Production Line
Structure: Ordinary Roller
Bearing Type: Double Sealed Bearing
Type: Parallel Conveyor Idler
Bearing: Precious Bearing

###

Customization:
Available

|


###

Model
Roller Dia
Tube
Thickness
Shaft Dia
(mm)
Roller Length
 (mm)
Sprocket Tube Material Surface Treatment
SS38 T=1.2,1.5 φ 12 300-1000  
 
 
 
 
 
14 tooth*1/2” pitch according to customers’ requirement
 
 
 
 
 
 
Carbon Steel
Stainless Steel
PVC
 
 
 
 
 
 
Zinc Plated
Chrome Plated
SS42 T=2.0 φ12  300-1000
SS48 T=2.9 φ12 300-1000
SS50 T=1.2,1.5 φ12 300-1500
SS57 T=1.2,1.5 φ12/15 300-1500
SS60 T=1.5,2.0,3.0 φ12/15 300-1500
SS76 T=2.0,3.0 φ12/15/20 300-2000
SS80 T=3.0 φ20 300-2000
SS89 T=2.5,3.0 φ20 300-2000

/ Piece
|
1 Piece

(Min. Order)

###

Material: Steel
Application: Chemical Industry, Grain Transportation, Mining Transport, Power Plant, Production Line
Structure: Ordinary Roller
Bearing Type: Double Sealed Bearing
Type: Parallel Conveyor Idler
Bearing: Precious Bearing

###

Customization:
Available

|


###

Model
Roller Dia
Tube
Thickness
Shaft Dia
(mm)
Roller Length
 (mm)
Sprocket Tube Material Surface Treatment
SS38 T=1.2,1.5 φ 12 300-1000  
 
 
 
 
 
14 tooth*1/2” pitch according to customers’ requirement
 
 
 
 
 
 
Carbon Steel
Stainless Steel
PVC
 
 
 
 
 
 
Zinc Plated
Chrome Plated
SS42 T=2.0 φ12  300-1000
SS48 T=2.9 φ12 300-1000
SS50 T=1.2,1.5 φ12 300-1500
SS57 T=1.2,1.5 φ12/15 300-1500
SS60 T=1.5,2.0,3.0 φ12/15 300-1500
SS76 T=2.0,3.0 φ12/15/20 300-2000
SS80 T=3.0 φ20 300-2000
SS89 T=2.5,3.0 φ20 300-2000

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
sprocket

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
sprocket

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
sprocket

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China Double Sprocket Roller for Double Chain Driving Roller Conveyor     wheel and sprocketChina Double Sprocket Roller for Double Chain Driving Roller Conveyor     wheel and sprocket
editor by CX2023-03-27

China Roller Chain Sprocket Wheel sprocket bushing

Relevant Industries: Lodges, Garment Retailers, Constructing Substance Outlets, Producing Plant, Machinery Repair Stores, Foods & Beverage Factory, Farms, Restaurant, House Use, Retail, Printing Stores, Building works , Power & Mining, Foodstuff & Beverage Stores, Promoting Organization
Substance: Metal
Common: ISO
other: chain wheel
Standard or Nonstandard: Common
Form: Rack Gear
Tooth Profile: Spur Gear
Processing: Forging
Packaging Details: common sea worthy bundle
Port: ZheJiang ,HangZhou

We can offer Roller Chain Sprocket Wheel in high good quality and competitive cost.

1. American Regular, European Regular, Manufacturing facility immediate offer Common sprocket enamel hardened sprocket Japanese Specifications
two. Pilot bore, completed bore, taper bore and particular bore offered
3. Brilliant surface and substantial precision
4. Sophisticated heat therapy and surface remedy crafts
5. Greater high quality and competitive value.
6. Material C45(1045), lower carbon metal, 40Cr, 20CrMnTi, stainless metal this sort of as SS316L, SS316, SS304, SS420, copper and so on. offered
seven. Standard sea deserving package deal to Europe and American
8. Substantial speed digital gear hobbing devices to promise the teeths good quality
9. Corrosion resistance treatment obtainable
ten. Management on tolerance and simple to put in
11. Good material and great therapy to make positive long existence span
12. OEM/ODM welcome

Enterprise variety
Company & Exporter
Major export marketplace
Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa
Materials
C45, Sizzling marketing mine assortment 35SiMn materials PC360 PC4 50B9-90,60B9-90,80B9-90,100B9-90,120B9-80,140B10-60,160B10-6006B10-one hundred twenty five,08B9-125,10B9-125,12B9-125,16B9-one hundred twenty five,20B9-114,24B9-ninety,28B9-seventy six,32B9-76, and other sprocket to suit with conveyor chain, new turning cnc device personalized cnc machining laser welding assembly elements for car portion agricultural chain
Packing
Plywood Scenario/Pallet

Packaging & Shipping and delivery

Our Hot Sale MerchandiseGearEquipment RackSprocketChainV PulleyTiming PulleyOur Solutions

Organization Data
Principal Goods
Exhibition
Get in touch with Us

Problems with sprockets

If you’re having trouble with your HP Sprocket, you’re not alone. This bike component isn’t without issues, but it’s also susceptible to other wear and tear. Check for worn tooth surfaces and hooked tips. When teeth wear out quickly, they can break the chain, so make sure you fix them as soon as possible.
You can solve this issue by installing the latest firmware update for your Sprocket printer. The firmware update is designed to provide a safe and reliable printing experience. When your Sprocket printer doesn’t print the pictures, it is likely because it’s not receiving enough power from the battery. Make sure the battery is at least 25% before you begin.
Insufficient or improper lubrication can cause a variety of problems. Proper lubrication can prevent or remove excessive wear, or protect the chain from the environment. It can also reduce the risk of excessive chain slack. The following are just a few common problems that can cause slack in the chain.
In case of excessive wear, a new sprocket may be necessary. If the sprocket and chain do not match, replace them with a similar size. In addition, a shock absorber can be installed to minimize load. Another alternative is to install a take-up idler, which helps prevent excessive chain elongation.
Improper alignment of the sprocket is another common cause of chain drive problems. If the sprocket is not aligned correctly, it will not be able to move smoothly through the chain during rotation. The teeth of the sprocket will become hooked, preventing the roller from smoothly moving through. This will force the roller chain to cling to the sprocket, and need to be replaced.
sprocket

Common types of sprockets

Power transmission equipment typically utilizes sprockets and chains. These are used in pairs to provide speed reduction. They are different from gears because the teeth of the sprocket do not mesh with those of the mating gears. They are typically made of plastic, but they can also be made of metal.
There are many common types of sprockets and chains. Some of these types of sprockets have large, narrow, or variable tooth pitch. The size of the sprocket depends on the size and pitch of the chain. If you are using a chain with a large pitch diameter, you should use a sprocket with large teeth. Conversely, a smaller pitch diameter will require a sprocket with small teeth.
Another way to identify the type of sprocket you’re using is to look at the number of strands. Single-strand sprockets are the most common, but you’ll also find many types that have multiple strands of chains. Multi-strand chains are generally larger and allow for greater torque to be transmitted from a common central shaft.
Another type is flat sprockets, which have no hub and drive through a series of holes. They are used for transmission of power or material in chain-driven systems, such as bicycles. They can also be used for overhead conveyors. In some cases, there is a special type that fits the shaft of an automobile, such as a transmission shaft.
There are many different types of sprockets, each with a unique function. Some are used for conveyor chains, while others are used for other applications. In most cases, sprockets are used in chain-driven machinery. They come in different sizes and pitches and are designed to work with particular types of chains.
When choosing a motor or transmission system, it is important to match sprockets and chains. A perfectly matched set of components will ensure that the motor and transmission work together. Generally, this alignment comes down to sprocket-to-sprocket matching. The process involves jacking up the motor and lining up the sprockets and chains. Then, the sprockets and chains are locked into place with cotter pins.
sprocket

Size of sprockets

To determine the correct chain length and sprocket diameter, the first step is to understand the difference between the diameters of the sprockets and cassettes. The smaller the diameters of sprockets, the lower the chain tension. The larger the sprocket, the longer the chain will need to be. This process requires the use of a derailleur that can roll a larger number of chains.
In addition to chain length, the spacing between sprockets is another important factor. If the sprockets are too far apart, the chain may slip through the sprocket. A smaller range of sprockets will prevent this and will increase the number of discrete gear ratios. In addition, if the chain skips over a sprocket, it will cause discomfort in shifting.
Choosing the correct size of sprockets is essential for cycling. Larger sprockets are usually necessary for road bikes. Likewise, a road bike will have larger gears than a gravel bike. Larger gears will help the cyclist accelerate more smoothly and ensure a smoother ride.
Using a chain calculator can help you determine the proper size of sprockets for your bike. You can also use a chain length calculator to determine the correct chain length. This calculator uses the distance between the sprockets to calculate chain length. However, it is important to note that it is not possible to calculate the length of a chain with a single sprocket.
The size of the sprocket must be in proportion to the length of the chain. It can be controlled by either adjusting the center of the sprocket or moving it to the proper position. The center of rotation of the sprocket is defined by the chosen geometry reference.
The report covers global and regional sales of sprockets. It also contains information on competitive dynamics and market concentration status. Moreover, the report includes detailed information about the manufacturers of sprockets. The study also includes regional and global market forecasts. It also provides a detailed breakdown of sales by type, application, and region.
When choosing the right size of sprockets, remember to take measurements and do some arithmetic. For example, a smaller countershaft sprocket will improve low-speed acceleration, while a larger rear sprocket will improve fuel mileage. In addition, it is recommended that you use the reverse sprocket size if you’re going to be riding on long highways.
sprocket

Maintenance of sprockets

Proper maintenance of sprockets and chains is crucial to the functioning of your bike. It is important to avoid overstretching them. If this happens, they will not fit properly and will require replacement. It is also important to prevent the kinks in your chain to reduce the amount of stress on your sprockets.
If you are unsure of the state of your sprockets and chains, you can replace them with a new chain and a new sprocket. If you notice that a chain is squeezing between the rear sprocket, it is time to replace the sprocket.
Proper maintenance of sprockets and chains involves cleaning and lubrication. Regular cleaning and lubrication can prevent damage and extend the life cycle of these parts. Proper lubrication will also ensure their smooth operation and minimize the noise. Regardless of whether your sprockets or chains are new or used, lubrication should be carried out at regular intervals to extend their useful life cycle.
Proper alignment of the sprockets and chains will ensure the most efficient performance and reliability. If you regularly change your chain and sprockets, you can prolong the life of these components and avoid costly repairs. Make sure you change the sprockets and chains only with professional mechanics. Always follow the instructions of the motorcycle manufacturer.
Proper maintenance of sprockets and chains is important to prevent premature sprocket replacement. Changing the sprocket too often can result in poor meshing, accelerating wear and tear of the new sprockets. When changing the sprocket, it is essential to turn the worn surface over before you install the new one.
It is important to follow the instructions and warning signs for proper maintenance of sprockets and chains. The safety of the workers and the environment should be prioritized. Follow the instructions of the manufacturer and avoid dangerous situations. It is essential not to anneal or electroplate the chain parts.
Proper lubrication is also vital. Use a non-petroleum based cleaner to clean the chain thoroughly and then apply lubricant. Avoid using engine oil as it is more viscous and cannot protect the chain against water.

China Roller Chain Sprocket Wheel     sprocket bushingChina Roller Chain Sprocket Wheel     sprocket bushing
editor by czh 2023-02-16

China Sprocket Roller Chain Standard Specification Front Sprockets Single Wheel Electric Scooter Roller Forging Wheel Chock Excavator Transmission Machine Sprocket supplier

Solution Description

sprockets specification regular chain entrance sprocket solitary wheel electrical scooter roller forging wheel chock excavator Transmission Machine sprocket 

 

Company type Producer & Exporter
Major export market Europe, North and South The us, Southeast Asia, Oceania, Middle East, Africa
Materials C45, minimal carbon steel, 40Cr, solid iron, stainless metal, As for each your ask for
Producing strategy Forged and then machined, hobbed, if want can also weld
Heat treatment High frequency quenching and so on
Floor treatment method Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on
Design Standard or nonstandard,  other sprocket to match with Conveyor Chain, Agricultural Chain
Packing Plywood Case/Pallet/Wood Situation

Maker of Sprocket, Chain sprockets, wheel and sprocket, travel sprocket, sprocket wheel, taper lock sprocket, gear sprocket, idle sprocket, bike sprocket and stainless steel sprocket, can interchange and substitute with martin measurement sprocket, jt size sprockets, did size chain sprocket and so on.

US $1-999
/ Piece
|
100 Pieces

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Bevel Wheel
Material: Steel

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

###

Business type Manufacturer & Exporter
Main export market Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa
Material C45, low carbon steel, 40Cr, cast iron, stainless steel, As per your request
Manufacturing method Forged and then machined, hobbed, if need can also weld
Heat treatment High frequency quenching and so on
Surface treatment Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on
Model Standard or nonstandard,  other sprocket to fit with Conveyor Chain, Agricultural Chain
Packing Plywood Case/Pallet/Wooden Case
US $1-999
/ Piece
|
100 Pieces

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Bevel Wheel
Material: Steel

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

###

Business type Manufacturer & Exporter
Main export market Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa
Material C45, low carbon steel, 40Cr, cast iron, stainless steel, As per your request
Manufacturing method Forged and then machined, hobbed, if need can also weld
Heat treatment High frequency quenching and so on
Surface treatment Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on
Model Standard or nonstandard,  other sprocket to fit with Conveyor Chain, Agricultural Chain
Packing Plywood Case/Pallet/Wooden Case

How to choose the right sprocket

Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.sprocket

Long Through Hole

Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore ​​size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.

face width

The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.

diameter

One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.sprocket

hub type

The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.

HZPT ZTB series

ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
sprocket

set screw

Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.

China Sprocket Roller Chain Standard Specification Front Sprockets Single Wheel Electric Scooter Roller Forging Wheel Chock Excavator Transmission Machine Sprocket     supplier China Sprocket Roller Chain Standard Specification Front Sprockets Single Wheel Electric Scooter Roller Forging Wheel Chock Excavator Transmission Machine Sprocket     supplier
editor by czh 2023-01-04

China Roller Chains and Bush Chains Conveyor Belt Parts Transmission Gearbox OEM ODM Casting Parts Chain Wheel, Sprocket Wheel with Best Sales

Item Description

SPROCKET  5/8” X 3/8”  10B Sequence SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C one.6mm
Tooth Width b1 9.0mm
Tooth Width B1 nine.1mm
Tooth Width B2 twenty five.5mm
Tooth Width B3 forty two.1mm
10B Collection ROLLER CHAINS  
Pitch fifteen.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47. forty one.48 twenty five 10 twenty five 25 twelve 40 twenty five 12 fifty five
9 52.six 46.42 thirty ten twenty five thirty 12 40 thirty twelve fifty five
10 fifty seven.5 fifty one.37 35 ten twenty five 35 twelve 40 35 12 fifty five
eleven 63. 56.34 37 12 thirty 39 14 forty 39 sixteen fifty five
12 sixty eight. sixty one.34 42 12 thirty 44 fourteen forty forty four 16 fifty five
13 73. 66.32 forty seven 12 30 forty nine 14 40 forty nine sixteen 55
fourteen seventy eight. seventy one.34 52 12 30 54 14 40 54 16 fifty five
fifteen 83. seventy six.36 fifty seven twelve 30 fifty nine fourteen 40 fifty nine sixteen fifty five
16 88. eighty one.37 60 12 30 sixty four 16 forty five 64 16 sixty
seventeen 93. 86.39 sixty twelve 30 sixty nine 16 45 sixty nine 16 60
eighteen 98.3 91.forty two 70 14 30 74 sixteen forty five seventy four 16 sixty
19 103.three 96.forty five 70 14 30 79 sixteen forty five seventy nine 16 60
20 108.four one zero one.49 75 14 thirty eighty four 16 45 eighty four 16 sixty
21 113.four 106.52 seventy five sixteen thirty 85 16 forty five eighty five twenty 60
22 118. 111.fifty five eighty 16 30 ninety sixteen forty five ninety twenty 60
23 123.five 116.fifty eight eighty 16 30 ninety five 16 forty five ninety five 20 sixty
24 128.3 121.sixty two eighty sixteen 30 a hundred 16 forty five a hundred 20 sixty
twenty five 134. 126.66 80 sixteen 30 105 sixteen forty five 105 twenty sixty
26 139. 131.70 85 20 35 a hundred and ten 20 forty five one hundred ten 20 60
27 one hundred forty four. 136.seventy five eighty five 20 35 a hundred and ten 20 forty five a hundred and ten twenty sixty
28 148.seven 141.78 90 20 35 one hundred fifteen 20 forty five one hundred fifteen 20 60
29 153.8 146.83 90 20 35 a hundred and fifteen twenty forty five 115 twenty sixty
thirty 158.8 151.87 90 20 35 a hundred and twenty twenty forty five 120 twenty 60
31 163.9 156.ninety two 95 twenty 35 a hundred and twenty twenty 45 a hundred and twenty 20 sixty
32 168.nine 161.ninety five ninety five twenty 35 120 twenty forty five a hundred and twenty twenty 60
33 174.5 167.00 95 20 35 a hundred and twenty 20 forty five 120 20 sixty
34 179. 172.05 ninety five twenty 35 a hundred and twenty 20 forty five 120 twenty 60
35 184.one 177.ten 95 twenty 35 120 20 45 a hundred and twenty twenty 60
36 189.one 182.15 a hundred twenty 35 one hundred twenty twenty forty five a hundred and twenty 25 60
37 194.two 187.20 a hundred twenty 35 120 twenty 45 a hundred and twenty 25 60
38 199.2 192.24 100 20 35 120 20 forty five a hundred and twenty 25 sixty
39 204.two 197.29 a hundred twenty 35 120 twenty 45 one hundred twenty 25 60
40 209.3 202.34 100 20 35 one hundred twenty twenty 45 a hundred and twenty twenty five 60
41 214.8 207.38 *one hundred twenty forty 120 20 fifty *130 twenty five sixty
forty two 2,199 212.forty three *one hundred twenty forty 120 twenty 50 *130 25 60
forty three 224.9 217.forty eight *one hundred twenty 40 a hundred and twenty 20 fifty *one hundred thirty 25 60
forty four 230. 222.53 *one hundred 20 forty a hundred and twenty twenty fifty *130 25 60
forty five 235. 227.58 *a hundred twenty forty *120 20 50 *one hundred thirty twenty five sixty
46 240.one 232.63 *one hundred twenty forty *one hundred twenty twenty fifty *130 twenty five sixty
47 245.one 237.sixty eight *one hundred 20 40 *120 twenty fifty *130 twenty five sixty
forty eight 250.2 242.seventy three *one hundred 20 forty *120 twenty fifty *130 25 sixty
49 255.2 247.78 *a hundred 20 forty *120 20 50 *130 25 60
50 260.three 252.eighty two *a hundred 20 40 *120 20 50 *130 twenty five 60
51 265.3 257.87 *100 20 forty *120 twenty 50 *one hundred thirty twenty five 60
52 270.4 262.ninety two *a hundred 20 forty *a hundred and twenty 20 50 *a hundred thirty twenty five 60
53 275.four 267.97 *one hundred twenty 40 *one hundred twenty twenty fifty *one hundred thirty twenty five sixty
54 280.five 273.03 *one hundred 20 40 *a hundred and twenty twenty 50 *a hundred thirty 25 sixty
fifty five 285.five 278.08 *a hundred twenty forty *a hundred and twenty 20 fifty *a hundred thirty twenty five sixty
fifty six 290.6 283.thirteen *a hundred 20 forty *a hundred and twenty twenty 50 *a hundred thirty twenty five 60
57 296. 288.18 *one hundred twenty 40 *a hundred and twenty 20 fifty *a hundred thirty 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 sixty four
59 305.seven 298.28 *a hundred twenty 43 *120 twenty fifty seven *130 25 64
60 310.8 303.33 *100 20 43 *a hundred and twenty twenty 57 *one hundred thirty twenty five 64
62 321.four 313.43 *one hundred twenty 43 *120 twenty fifty seven *130 twenty five sixty four
sixty four 331.5 323.fifty three *one hundred twenty forty three *a hundred and twenty twenty 57 *a hundred thirty 25 67
sixty five 336.five 328.fifty eight *100 twenty forty three *120 twenty fifty seven *a hundred thirty twenty five 67
sixty six 341.6 333.sixty four *100 twenty forty three *a hundred and twenty 20 57 *a hundred thirty twenty five sixty seven
sixty eight 351.seven 343.74 *one hundred twenty 43 *a hundred and twenty 20 fifty seven *a hundred thirty 25 sixty seven
70 361.8 353.84 *100 20 forty three *one hundred twenty 20 57 *130 25 67
seventy two 371.9 363.94 *a hundred 20 43 *120 twenty fifty seven *one hundred thirty twenty five sixty seven
75 387.one 379.10 *100 20 43 *one hundred twenty twenty 57 *a hundred thirty 25 67
seventy six 392.one 384.fifteen *one hundred twenty 43 *one hundred twenty twenty 57 *a hundred thirty 25 67
seventy eight 402.2 394.twenty five *one hundred 20 43 *120 twenty fifty seven *one hundred thirty 25 67
80 412.3 404.36 *a hundred 20 forty three *one hundred thirty twenty fifty seven *130 twenty five 67
85 437.six 429.62 *100 twenty fifty *a hundred thirty twenty 58 *130 twenty five 67
90 462.8 454.88 *one hundred 20 50 *one hundred thirty twenty 58 *130 25 sixty seven
95 488.five 480.14 *a hundred twenty 50 *130 twenty 58 *a hundred thirty 25 sixty seven
100 513.4 505.40 *a hundred 20 fifty *a hundred thirty twenty 58 *one hundred thirty 25 sixty seven
one hundred ten 563.nine 555.ninety two *one hundred twenty fifty *130 twenty fifty eight *a hundred thirty twenty five 67
114 584.1 576.thirteen *100 twenty 50 *a hundred thirty 20 fifty eight *130 25 sixty seven
a hundred and twenty 614.four 606.forty five *100 20 fifty *one hundred thirty twenty fifty eight *a hundred thirty 25 sixty seven
a hundred twenty five 639.seven 631.51 *one hundred twenty 50 *one hundred thirty 20 fifty eight *a hundred thirty 25 67

Observe: *welding hub

Standard Information.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, and many others
two. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface area Treatment method Heat treatment, Quenching treatment method, Large frequency normalizing therapy, Sharpening, Electrophoresis paint processing, Anodic oxidation therapy, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so forth
Style criterion ISO DIN ANSI & Customer Drawings
Dimension Client Drawings & ISO standard 
Application Industrial transmission gear
Bundle Picket Case / Container and pallet, or created-to-purchase
Certification ISO9001: 2008 
Gain Top quality very first, Services first, Aggressive cost, Quick delivery
Supply Time 20 times for samples. 45 days for official order.

Installation AND Using

The chain  spoket, as a travel or deflection for chains, has pockets to hold the chain links with a D-profile cross area with flat aspect surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain website link centre plane. The chain back links are pressed firmly from the outer surfaces and every of the aspect surfaces by the angled laying surfaces at the foundation of the pockets, and also the support surfaces of the wheel human body collectively with the stop sides of the webs fashioned by the major and trailing walls of the pocket.

Recognize

When fitting new chainwheels it is extremely critical that a new chain is equipped at the very same time, and vice versa. Using an old chain with new sprockets, or a new chain with outdated sprockets will trigger rapid use.

It is important if you are putting in the chainwheels by yourself to have the manufacturing facility service guide certain to your model. Our chainwheels are manufactured to be a immediate substitute for your OEM chainwheels and as this kind of, the installation ought to be performed according to your versions services guide.

During use a chain will stretch (i.e. the pins will put on creating extension of the chain). Employing a chain which has been stretched far more than the above optimum allowance brings about the chain to trip up the teeth of the sprocket. This leads to injury to the tips of the chainwheels teeth, as the power transmitted by the chain is transmitted fully by means of the prime of the tooth, instead than the complete tooth. This final results in significant sporting of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Specifications companies (such as ANSI and ISO) keep expectations for design, proportions, and interchangeability of transmission chains. For illustration, the following Desk exhibits information from ANSI regular B29.1-2011 (Precision Electrical power Transmission Roller Chains, Attachments, and Sprockets) created by the American Modern society of Mechanical Engineers (ASME). See the references[8][9][ten] for added information.

ASME/ANSI B29.1-2011 Roller Chain Common SizesSizePitchMaximum Roller DiameterMinimum Greatest Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Regular Dimensions
Measurement Pitch Greatest Roller Diameter Least Greatest Tensile Strength Measuring Load
25 .250 in (6.35 mm) .130 in (3.thirty mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.fifty three mm) .two hundred in (5.08 mm) one,760 lb (800 kg) 18 lb (8.2 kg)
forty one .five hundred in (twelve.70 mm) .306 in (7.77 mm) one,500 lb (680 kg) eighteen lb (8.2 kg)
forty .500 in (twelve.70 mm) .312 in (7.92 mm) three,one hundred twenty five lb (1,417 kg) 31 lb (14 kg)
fifty .625 in (15.88 mm) .400 in (10.sixteen mm) four,880 lb (2,210 kg) 49 lb (22 kg)
60 .750 in (19.05 mm) .469 in (11.ninety one mm) seven,030 lb (3,one hundred ninety kg) 70 lb (32 kg)
80 one.000 in (twenty five.forty mm) .625 in (15.88 mm) twelve,500 lb (5,700 kg) a hundred twenty five lb (fifty seven kg)
a hundred 1.250 in (31.seventy five mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
one hundred twenty 1.five hundred in (38.10 mm) .875 in (22.23 mm) 28,one hundred twenty five lb (twelve,757 kg) 281 lb (127 kg)
a hundred and forty 1.750 in (forty four.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
a hundred and sixty 2.000 in (50.80 mm) one.one hundred twenty five in (28.fifty eight mm) fifty,000 lb (23,000 kg) five hundred lb (230 kg)
a hundred and eighty 2.250 in (fifty seven.15 mm) 1.460 in (37.08 mm) sixty three,280 lb (28,seven hundred kg) 633 lb (287 kg)
two hundred 2.500 in (sixty three.50 mm) 1.562 in (39.sixty seven mm) 78,a hundred seventy five lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (seventy six.20 mm) 1.875 in (forty seven.sixty three mm) 112,five hundred lb (fifty one,000 kg) 1,000 lb (450 kg

For mnemonic functions, under is yet another presentation of key proportions from the identical common, expressed in fractions of an inch (which was portion of the contemplating powering the choice of chosen figures in the ANSI common):

Pitch (inches) Pitch expressed
in eighths
ANSI regular
chain amount
Width (inches)
14 twoeight two5 18
3eight three8 35 three16
1two 4eight four1 1four
one2 48 four five16
fiveeight five8 5 three8
threefour sixeight six one2
1 eight8 eight 5eight

Notes:
one. The pitch is the distance in between roller centers. The width is the distance in between the website link plates (i.e. marginally much more than the roller width to allow for clearance).
two. The proper-hand digit of the common denotes 0 = regular chain, 1 = lightweight chain, 5 = rollerless bushing chain.
three. The left-hand digit denotes the amount of eighths of an inch that make up the pitch.
four. An “H” pursuing the normal number denotes heavyweight chain. A hyphenated variety pursuing the standard variety denotes double-strand (2), triple-strand (3), and so on. Hence 60H-3 denotes quantity 60 heavyweight triple-strand chain.
 A common bicycle chain (for derailleur gears) utilizes narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load ability. The a lot more sprockets at the rear wheel (traditionally 3-6, today 7-twelve sprockets), the narrower the chain. Chains are bought in accordance to the number of speeds they are developed to perform with, for example, “ten speed chain”. Hub gear or single pace bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the greatest thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped backlinks have an even amount of backlinks, with every single narrow url adopted by a broad one. Chains built up with a uniform variety of website link, slim at 1 and broad at the other finish, can be manufactured with an odd variety of back links, which can be an benefit to adapt to a special chainwheel-length on the other aspect this sort of a chain tends to be not so powerful.

Roller chains created making use of ISO standard are at times called as isochains.

 

WHY Select US 

one. Reliable High quality Assurance Program
2. Slicing-Edge Pc-Controlled CNC Equipment
three. Bespoke Remedies from Highly Knowledgeable Experts
4. Customization and OEM Offered for Certain Application
5. Comprehensive Stock of Spare Parts and Add-ons
6. Well-Produced Around the world Marketing and advertising Network
seven. Effective Soon after-Sale Service System

 

The 219 sets of advanced automated creation gear supply ensures for large item good quality. The 167 engineers and specialists with senior skilled titles can design and create items to satisfy the precise calls for of buyers, and OEM customizations are also offered with us. Our sound worldwide support network can supply clients with timely right after-income technological companies.

We are not just a producer and supplier, but also an market expert. We work professional-actively with you to offer specialist suggestions and product tips in purchase to finish up with a most value efficient merchandise obtainable for your particular software. The consumers we provide throughout the world selection from conclude users to distributors and OEMs. Our OEM replacements can be substituted where ever essential and suitable for each restore and new assemblies.

 

 

US $9.7
/ Piece
|
3,000 Pieces

(Min. Order)

###

Standard Or Nonstandard: Nonstandard, Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear, Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Alloy Steel,

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

###

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58
US $9.7
/ Piece
|
3,000 Pieces

(Min. Order)

###

Standard Or Nonstandard: Nonstandard, Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear, Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Alloy Steel,

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

###

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
sprocket

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
sprocket

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
sprocket

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China Roller Chains and Bush Chains Conveyor Belt Parts Transmission Gearbox OEM ODM Casting Parts Chain Wheel, Sprocket Wheel     with Best Sales China Roller Chains and Bush Chains Conveyor Belt Parts Transmission Gearbox OEM ODM Casting Parts Chain Wheel, Sprocket Wheel     with Best Sales
editor by czh 2023-01-03

China wholesaler Tooth Industrial Steel Roller Chain Sprocket wheel and sprocket

Warranty: 1 a long time
Applicable Industries: Manufacturing Plant, Foodstuff & Beverage Manufacturing unit, Building works , Vitality & Mining, ALL
Personalized help: OEM, ODM, OBM
Software: Conveyor System
Product name: Sprockets
Merchandise Keywords and phrases: Special Roller Chains
Packaging Specifics: wood bundle
Port: HangZhou

Product Identifysprockets
QualityGood
ColorCustomized
SizeCustomized
Q:What are your advantages? 1.Technology supported by Australian Team 2. Production in China with competitive value 3. Quickly delivery & secure good quality 4. Tailored layout and creation Q:Does your manufacturing unit customise basing on the drawing? Yes, has a skilled complex staff for personalize. Q:What should I provides in get to get a correct cost? We need to have drawings. If no ,make sure you ship me some information or I can provide some for decide on. Q:What is your payment,how can we spend you? You can use L/C,D/A,D/P,T/T,Western Union and MoneyGram

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
sprocket

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
sprocket

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
sprocket

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China wholesaler Tooth Industrial Steel Roller Chain Sprocket     wheel and sprocketChina wholesaler Tooth Industrial Steel Roller Chain Sprocket     wheel and sprocket
editor by czh