Tag Archives: standard chain

China Standard High Quality China Motorcycle Parts Motorcycle Chain and Sprocket for CB125

Product Description

high quality China motorcycle parts motorcycle chain and sprocket for CB125

Our Chain and sprocket advantage:

1. Mounting holes and tooth concentricity tolerance is 0.01mm 2. Lightweight High-Performance sprocket for added horsepower to the Front wheel
3. Features self cleaning grooves to clear mud and increase sprocket life
4. Advanced tooth profile, concentricity and accuracy of fit provide maximum power transfer and long-life

Fatigue Strength:
1.smooth surface of pitch holes.
2.exactly defined, high press fits between pins,bushings and link plates.
3.heat treatment for optimal strength and maximum breaking loads.

Wear Resistance:
1.selection of the best materials for appropriate heat treatment.
2.The unique bush production technology can maintain a precise gap,
to reduce the foreign matters and increase friction durability.
3.optimal hardening penetration through induction or case hardening of pins and bushings.
4.providing longer service life and less downtime.

Reliability:
1.highest accuracy of hole dimensions and surface quality.
2.high precision pitch control ensures smooth and low-noise operation of the chain.

3.100% inspection of incoming materials.

4. Tensile test before shipment.

Consistency:
1.the consistency of all parts can ensure that each point of the chain can be easily dismounted.
2.any part can be replaced.

For different market, Different models are hot selling:

1. Mexican market:LIFAN110 WAVE110 AT110,DINAMO APRISA 110 C110,ITALIKA FT125 CG125,ITALIKA FT150 CG150,TITAN2000,GY6-125 CS125 DS125,GY6-150 DS150,ST70 APRISA ZANETTI 70CC,HONDA C90,HONDA BROSS125,HONDA BROSS150,HONDA XR200, CG200,HONDA CARGO125,HONDA CARGO150,TITAN150,YBR125,CARPTON

2.ColumbiaMarket:LIBERO,LB50,MT90/V50,PULSAR,FC80,RJ/STORM,RG110,RX100,RX125,RX115,RX135,RXK,SMASH110,SONIC 2003/2004 ,STROM,SUPRA,T50,TENA,TIGER,TITAN99,TITAN150,TR125,TS100,TS125E,TS100ERZ,TS125ERZ,TS185ERZ,WAVE,V50,V80,V80 NEW MODEL,WY147,XF90,XF125,XL125,XL185,XR200,XRM,YAMAHA BWS125,YBR125,AKT110,AK125,AKT125,AKT125 MKD,AKT125 TT,AKT EVO,AX100,AXIS90,JOG90,PULSAR135,BES,BEST125,BOXER CT100,C50,C70,C90,C100,C110,CARGO125,CARGO150,CBF150,SUPER135,CD100,BIZ,CD100 DELUXE,CD100 SLEEK,CG125,CG150,EN125,AX115,CM125,CRYPTON,TIIOE,CUB,DISCOVER,DT125,DT125K,DT175K,DY90,DY100,ECO,EM125,EN125,FD115,FD115 VIVA,FR50,FR80,CAS,GD116,GD125,GL-125,GLX50,GLX90,GN125,GN125H,GRAND,GS125,GSX,GY6-150,GY6-200,HERO,HONDA WAVE,HONDA CB150,JD100,JH70,JH150,K90,LEAD90

3.South America market:
BAJAJ BOXER CT100,BAJAJ BOXER BM100,BAJAJ BOXER BM150,BAJAJ PULSAR135,BAJAJ PULSAR150,BAJAJ PULSAR180,BAJAJ PULSAR200,BAJAJ PULSAR220,BAJAJ DISCOVER125,BAJAJ DISCOVER135,BAJAJ XCD125,BAJAJ 2T 3W,BAJAJ 4T 3W,BAJAJ TORIO 4S,BAJAJ CALIBER115,HONDA C100 WAVE,HONDA CGL125,HONDA NXR125 BROS,HONDA STORM 125CC,HONDA TWISTER 250CC,HONDA XLR250-XR250,HONDA XL/XR/NX200,XIHU (WEST LAKE) DIS. JH100-2,JIALIANG JH125-6,XIHU (WEST LAKE) DIS. JH150T CHOPPER,XIHU (WEST LAKE) DIS. JL125T SCOOTER,KAWASAKI WIND125,KYMCO ACTIV110,SUZUKI DR200,YAMAHA XT225,YAMAHA XTZ125K,YUMBO DAKAR150,YUMBO DAKAR200,YAMAHA JOG/3KJ50,FT200,TITAN2000,TITAN150,TITAN99,CG125,HJ125-7,GXT200

4.Middle east Market:
FIZY,SPACY,CBF125,CBF150,GY6-125,GY6-150,WH100,WH125,AN125,YBR125,ACTIVE’CD70,CD100,CD110,WAVE110,CYGNUS RS125CC,CG125,CG150,CG200,CGB150,CGB125,CGB200,CGB250,C110,GY6-50,CM125

5. Southeast Asia:LC135,LC150,Y15,NMAX155, NVX155, AEROX ,MIO,MIO 125(MIO 3),MIO J, WAVE100,WAVE110, XRM110,WAVE125, KWB, KVY, KVB, RAIDER150, FU150, KFM, KFL, KYZ,
GN5,DREAM100, JUPITER Z/VEGA R NEW,BYSON, JUPITER Z/VEGA R NEW,RXK135,GRAND/SUPRA X , VEGA ZR

Q1: Are you a factory or a trading company?
A1:We are trading company,so we can supply you all kinds of parts you want and no matter how many you need, we can deal it;

Q2:Is it possible to get a sample first to check quality?
A2:Yeah, we can offer any sample as you want,also we hope you confirm the quality before you make an order;

Q3:Is it possible to make our own brand packing?
A3:We can make customer brand packing when they reach our MOQ;

Q4:Any quality warranty?
A4:Generally speaking, we give 1 year Quality warranty to customers.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Quality Guarantee
Warranty:	6 Month
Type:	Sprocket
Material:	Steel
Surface Treatment:	Zinc Plated
Product Name:	Motorcycle Sprocket

Samples:	US$ 30/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

wheel sprocket

What are the Maintenance Requirements for a wheel sprocket Assembly?

Proper maintenance of the wheel sprocket assembly is essential to ensure its optimal performance and longevity. Here are some maintenance tips:

Regular Cleaning: Keep the wheel sprocket assembly clean from dirt, debris, and grime. Regularly wipe down the sprockets and chain to prevent buildup, which can lead to accelerated wear.
Lubrication: Apply a suitable lubricant to the chain and sprockets to reduce friction and wear. Lubrication also helps in maintaining smooth operation and preventing corrosion. However, avoid over-lubrication, as excessive grease can attract more dirt.
Chain Tension: Check the tension of the chain regularly. A loose chain can result in slippage and damage to the sprockets, while an overly tight chain can increase wear and strain on the components. Adjust the chain tension as per the manufacturer’s guidelines.
Inspection: Periodically inspect the sprockets and chain for signs of wear, damage, or elongation. Replace any worn-out or damaged components promptly to avoid further issues.
Alignment: Ensure proper alignment of the sprockets and wheels. Misalignment can lead to uneven wear and reduced efficiency. Adjust the alignment as needed to maintain smooth power transmission.
Replace Worn Parts: Over time, sprockets and chains will wear out due to regular use. Replace worn sprockets or chains with new ones from reputable suppliers to maintain optimal performance.
Environmental Considerations: In certain applications, exposure to harsh environments or extreme temperatures may require more frequent maintenance and inspection.

By following these maintenance practices, you can extend the lifespan of the wheel sprocket assembly and ensure reliable operation in various applications.

wheel sprocket

Using a Belt Sprocket in Place of a Chain Sprocket with a Wheel

Yes, in many cases, a belt sprocket can be used in place of a chain sprocket with a wheel, provided that the system is designed to accommodate the change.

Both chain sprockets and belt sprockets serve the same fundamental purpose of transferring rotational motion and power between the wheel and the driven component. However, there are some important considerations to keep in mind when replacing a chain sprocket with a belt sprocket:

Alignment: Belt sprockets and chain sprockets must be aligned properly with the wheel to ensure smooth and efficient power transmission. Any misalignment can cause premature wear and reduce the system’s overall performance.
Tension: Chain-driven systems require specific tension to prevent slack and maintain proper engagement between the sprockets and the chain. Belt-driven systems, on the other hand, require appropriate tension to prevent slippage. Ensuring the correct tension for the specific type of sprocket is crucial for reliable operation.
Load Capacity: Consider the load capacity and torque requirements of the system when selecting a belt sprocket. Belt sprockets may have different load-carrying capabilities compared to chain sprockets, and using the wrong type can lead to premature wear or failure.
Speed and RPM: Belt-driven systems may have different operating speeds and RPM limits compared to chain-driven systems. Ensure that the selected belt sprocket can handle the desired rotational speed without exceeding its design limitations.
System Design: Changing from a chain-driven system to a belt-driven system (or vice versa) may require modifications to the overall system design, including the size of the sprockets and the layout of the system. Consult with an engineer or a qualified professional to ensure that the replacement is appropriate and safe.

Overall, replacing a chain sprocket with a belt sprocket can be a viable option in certain applications. However, it’s essential to consider the factors mentioned above and evaluate the compatibility of the new sprocket with the existing system to achieve optimal performance and longevity.

wheel sprocket

Common Applications of Wheels and Sprockets in Machinery

Wheels and sprockets are crucial components used in various machinery and mechanical systems for power transmission, motion control, and mechanical advantage. Some common applications include:

1. Vehicles:

Wheels and sprockets are extensively used in vehicles, including automobiles, motorcycles, bicycles, and even heavy-duty trucks and construction equipment. Sprockets and chains are commonly found in motorcycles and bicycles for power transmission from the engine or pedals to the wheels.

2. Industrial Machinery:

In industrial settings, wheels and sprockets play a vital role in conveyor systems, where they are used to move materials or products along a production line. Sprockets are also employed in various machinery to transfer rotational motion and power between components.

3. Agricultural Equipment:

Agricultural machinery often relies on wheels and sprockets for functions such as driving tractors, operating harvesting equipment, and propelling irrigation systems.

4. Robotics:

Wheels and sprockets are commonly used in robotic systems to provide mobility and movement capabilities. Sprockets and chains or belts are used in robotic arms and joints to facilitate precise and controlled motion.

5. Material Handling:

Conveyor systems in warehouses and distribution centers utilize wheels and sprockets to move packages, products, and materials efficiently. The sprockets engage with conveyor chains to create a continuous loop for material transport.

6. Mining and Construction:

In heavy industries like mining and construction, large machinery such as excavators, bulldozers, and cranes utilize wheels and sprockets for propulsion and movement. Tracks with sprockets are commonly used in these applications for enhanced traction and stability.

7. Factory Automation:

In automated manufacturing processes, wheels and sprockets are employed in robotic arms and assembly line systems to control movement and manipulate objects with precision.

8. Renewable Energy:

In wind turbines, wheels and sprockets are used to convert the rotational motion of the blades into electrical energy by driving the generator.

These are just a few examples of the diverse applications of wheels and sprockets in machinery and mechanical systems. Their versatility, efficiency, and ability to provide mechanical advantage make them essential components in various industries.

China Standard High Quality China Motorcycle Parts Motorcycle Chain and Sprocket for CB125
editor by Dream 2024-05-16

China Standard CZPT Motorcycle Spare Parts Motorcycle Driving Chain and Sprocket for Honda Cg125I

Product Description

Yamamoto Motorcycle Spare Parts Motorcycle Driving Chain and Sprocket For HONDA CG CG125I

We can offer all the motorcycle parts and scooter parts, please feel free to contact us if you are interested in any of the items, we’ll quote the best prices with high quality. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type:	Brake Plate Disc
Material:	Aluminium Alloy/Aluminum
Certification:	CCC, ISO9001:2000, CE

Samples:	US$ 200/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

wheel sprocket

Safety Precautions for Working with wheel sprocket Systems

Working with wheel sprocket systems involves potential hazards, and it’s essential to follow safety precautions to prevent accidents and injuries. Here are some safety measures to consider:

Proper Training: Ensure that anyone working with the wheel sprocket systems is adequately trained in their operation, maintenance, and safety procedures.
Use Personal Protective Equipment (PPE): Always wear appropriate PPE, such as safety glasses, gloves, and protective clothing, to protect against potential hazards.
Lockout/Tagout: Before performing any maintenance or repair work on the system, follow lockout/tagout procedures to prevent accidental startup or energization.
Keep Work Area Clean: Maintain a clean work area and remove any debris or obstacles that could interfere with the operation of the system.
Inspect Regularly: Regularly inspect the wheels, sprockets, and chains for signs of wear, damage, or misalignment. Address any issues promptly.
Ensure Proper Lubrication: Adequate lubrication of the sprockets and chains is crucial for smooth operation and to reduce friction and wear.
Check Tension: Verify that the chain tension is within the recommended range. Too loose or too tight tension can lead to operational problems.
Avoid Loose Clothing: Keep long hair, loose clothing, and jewelry away from moving parts to avoid entanglement.
Follow Manufacturer’s Guidelines: Adhere to the manufacturer’s guidelines and recommendations for installation, operation, and maintenance of the wheel sprocket system.
Use Guards and Enclosures: Install appropriate guards and enclosures to protect against contact with moving parts.
Safe Handling: When transporting or handling heavy wheels or sprockets, use proper lifting techniques and equipment.

Prioritizing safety when working with wheel sprocket systems is essential to prevent accidents and maintain a safe working environment. Always be vigilant, follow safety protocols, and address any concerns promptly to ensure the well-being of everyone involved.

wheel sprocket

Choosing the Right Material for a Sprocket to Ensure Longevity

Choosing the right material for a sprocket is crucial to ensure its longevity and reliable performance in a given application. The material selection depends on various factors such as load, speed, operating environment, and budget. Here are some common materials used for sprockets and their considerations:

Steel: Steel sprockets are widely used in a wide range of applications due to their excellent strength, durability, and wear resistance. They are suitable for heavy-duty and high-speed operations. Different grades of steel, such as carbon steel or alloy steel, offer varying levels of hardness and strength.
Stainless Steel: Stainless steel sprockets are preferred when corrosion resistance is essential, making them suitable for applications where the sprocket is exposed to moisture, chemicals, or outdoor elements. They are commonly used in food processing, pharmaceutical, and marine industries.
Cast Iron: Cast iron sprockets offer good wear resistance and are often used in low to medium-speed applications. They are cost-effective and provide excellent performance in less demanding conditions.
Plastics: Plastic sprockets are lightweight and corrosion-resistant. They are commonly used in applications where low noise, self-lubrication, and resistance to chemicals or moisture are required. However, they have limited load-carrying capacity and may not be suitable for heavy-duty applications.
Aluminum: Aluminum sprockets are lightweight and commonly used in applications where weight reduction is critical, such as aerospace and certain machinery. However, they are not as durable as steel sprockets and are not suitable for high loads or harsh environments.

When choosing the right material for a sprocket, consider the following:

Load Capacity: Select a material that can handle the expected loads in the application without deforming or wearing excessively.
Speed: Higher speeds may require materials with better heat dissipation and wear resistance.
Environment: Consider factors such as moisture, chemicals, temperature, and outdoor exposure. Choose a material with suitable corrosion resistance and resilience to environmental conditions.
Maintenance: Some materials may require more frequent maintenance or lubrication to ensure longevity.
Cost: Balance the material’s performance with the budget constraints of the project.

It’s essential to consult with sprocket manufacturers or material experts to determine the most appropriate material for your specific application. They can provide valuable insights and recommendations based on your requirements, helping to ensure the longevity and optimal performance of the sprocket in your machinery or equipment.

wheel sprocket

How Does a wheel sprocket Assembly Transmit Power?

In a mechanical system, a wheel sprocket assembly is a common method of power transmission, especially when dealing with rotary motion. The process of power transmission through a wheel sprocket assembly involves the following steps:

1. Input Source:

The power transmission process begins with an input source, such as an electric motor, engine, or human effort. This input source provides the necessary rotational force (torque) to drive the system.

2. Wheel Rotation:

When the input source applies rotational force to the wheel, it starts to rotate around its central axis (axle). The wheel’s design and material properties are essential to withstand the applied load and facilitate smooth rotation.

3. Sprocket Engagement:

Connected to the wheel is a sprocket, which is a toothed wheel designed to mesh with a chain. When the wheel rotates, the sprocket’s teeth engage with the links of the chain, creating a positive drive system.

4. Chain Rotation:

As the sprocket engages with the chain, the rotational force is transferred to the chain. The chain’s links transmit this rotational motion along its length.

5. Driven Component:

The other end of the chain is connected to a driven sprocket, which is attached to the component that needs to be powered or driven. This driven component could be another wheel, a conveyor belt, or any other machine part requiring motion.

6. Power Transmission:

As the chain rotates due to the engagement with the sprocket, the driven sprocket also starts to rotate, transferring the rotational force to the driven component. The driven component now receives the power and motion from the input source via the wheel, sprocket, and chain assembly.

7. Output and Operation:

The driven component performs its intended function based on the received power and motion. For example, in a bicycle, the chain and sprocket assembly transmit power from the rider’s pedaling to the rear wheel, propelling the bicycle forward.

Overall, a wheel sprocket assembly is an efficient and reliable method of power transmission, commonly used in various applications, including bicycles, motorcycles, industrial machinery, and conveyor systems.

China Standard CZPT Motorcycle Spare Parts Motorcycle Driving Chain and Sprocket for Honda Cg125I
editor by Dream 2024-05-09

China Standard Bucket Elevator Transmission Chain Conveyor Bucket Chain Nse100

Product Description

HangZhou HAYING TECHNOLOGY INDUSTRIES CO., LTD

We are a research and development production, distribution in 1 of the business enterprises. The main production of Marine anchor chain and hoist ring chain, hoist chain and various accessories.

Founded in 1965, has been producing Marine anchor chain (13-46) and elevator ring chain (13-30), plate chain and various types of machine accessories. Also distributes Japanese standard, American standard, German standard series chain, sprocket, can be processed according to the user’s drawing.

Products are widely used in agricultural machinery, lifting platform, food machinery, metallurgical machinery, mining machinery, engineering machinery, road construction machinery, CNC machinery and other industries.

Our high-quality products have won the recognition of the majority of users, the current products are not only sold to more than 30 provinces and cities in the country, but also exported to many countries in Asia, Europe and America.

Our company has a complete and scientific quality management system, we regard quality as the core element of the long-term development of enterprises. And has a mature production technology, good service attitude of the team. We will continue to strengthen the technology research and development and manufacturing capabilities of high-end products, and continue to introduce products with market competitiveness to meet the needs of our customers.

Product Description
Large conveying capacity: conveying capacity up to 100m3/h

Long service life: The high strength wear-resistant chain made of alloy steel by advanced heat treatment means can ensure the service life of the conveyor chain for 3-5 years under normal continuous use

Wide lifting range: it can not only lift powder and granular materials, but also lift large grinding materials and materials with temperatures up to 200ºC

High lifting height: under the rated conveying capacity, the lifting height can reach 50m. Materials with high humidity and strong viscosity should not be selected

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material:	Iron
Structure:	Welded Chain
Surface Treatment:	Polishing
Chain Size:	1/2"*11/128"
Feature:	Heat Resistant
Transport Package:	Wooden Box

Customization:	Available \| Customized Request

transmission chain

What are the advantages of using a silent transmission chain?

A silent transmission chain, also known as a silent chain or an inverted-tooth chain, offers several advantages in various applications. Here’s a detailed explanation:

1. Noise Reduction: One of the primary advantages of a silent transmission chain is its ability to minimize noise during operation. The unique design of the chain features inverted teeth that engage with matching sprockets without making direct contact. This design significantly reduces the noise generated by the chain’s movement, resulting in a quieter operation compared to traditional roller chains.

2. Smooth and Vibration-Free Operation: Silent transmission chains provide a smooth and vibration-free power transmission. The absence of metal-to-metal contact between the chain and sprockets reduces friction and vibration, resulting in smoother operation. This characteristic is particularly beneficial in applications where noise and vibrations need to be minimized, such as in precision machinery, office equipment, or medical devices.

3. High Efficiency: Silent transmission chains offer high power transmission efficiency. The precision-engineered tooth profile ensures optimal contact with the sprockets, resulting in efficient energy transfer. The reduced friction and vibration also contribute to improved efficiency by minimizing energy losses during power transmission.

4. Increased Service Life: Silent chains are designed for durability and longevity. The use of high-quality materials, precise manufacturing processes, and robust construction enhance their resistance to wear, elongation, and fatigue. Silent chains can withstand high loads and exhibit excellent resistance to corrosion and lubrication degradation, resulting in extended service life and reduced maintenance requirements.

5. Wide Range of Applications: Silent transmission chains find applications in various industries and systems. They are commonly used in industrial machinery, printing presses, packaging equipment, textile machines, automotive timing systems, and other applications that require low noise, precise power transmission, and long service life.

6. Design Flexibility: Silent chains offer design flexibility due to their ability to operate in a compact space. Their compact design allows for more flexibility in equipment layout and design, making them suitable for applications with space constraints.

7. Reliability and Safety: Silent transmission chains are engineered for reliability and safety. Their robust construction and ability to handle high loads ensure secure power transmission, minimizing the risk of chain failure or system breakdown. Additionally, their low-noise operation and reduced vibration contribute to a safer working environment.

When considering the use of a silent transmission chain, it is important to evaluate the specific requirements of the application, including load capacity, speed, space limitations, and noise considerations. Consulting with chain manufacturers or industry experts can provide valuable insights and assistance in selecting the appropriate silent chain for optimal performance and efficiency.

transmission chain

How does the alignment of sprockets affect the lifespan of a transmission chain?

The alignment of sprockets plays a crucial role in the lifespan and performance of a transmission chain. Here’s a detailed answer to the question:

1. Proper Load Distribution: When the sprockets are aligned correctly, the transmission chain is able to evenly distribute the load along its length. This ensures that the chain experiences uniform stress and minimizes the concentration of forces on specific chain links. Improper alignment can result in uneven load distribution, leading to accelerated wear and fatigue of the chain.

2. Reduced Friction and Wear: Proper alignment helps maintain the correct engagement between the chain and the sprockets. When the chain engages smoothly with the sprockets, friction and wear are minimized. On the other hand, misaligned sprockets can cause the chain to rub against the teeth or sides of the sprockets, leading to increased friction, wear, and potential chain failure.

3. Chain Tension: Sprocket alignment also affects the tension of the transmission chain. Proper alignment ensures that the chain remains properly tensioned throughout its operation. Excessive tension due to misalignment can lead to increased stress on the chain, resulting in accelerated wear, fatigue, and potential chain breakage. Insufficient tension can cause the chain to skip or disengage from the sprockets.

4. Smooth and Efficient Operation: When the sprockets are aligned correctly, the transmission chain experiences smooth and efficient operation. This allows for smooth power transfer, reduced vibration, and noise levels, and improved overall system performance. Misaligned sprockets can cause the chain to bind, jump, or produce excessive noise, leading to decreased efficiency and potential damage to the chain and sprockets.

5. Extended Chain Life: Proper sprocket alignment helps to extend the lifespan of the transmission chain. By ensuring that the chain operates within its design parameters and experiences minimal stress and wear, the risk of premature failure is reduced. This leads to longer chain life, reduced maintenance requirements, and lower overall operating costs.

It’s important to regularly inspect and maintain the alignment of sprockets in a transmission chain system. Proper installation, periodic alignment checks, and adjustment when necessary are essential for maximizing the lifespan and performance of the transmission chain.

transmission chain

What is a transmission chain and how does it work?

A transmission chain is a type of mechanical chain used to transmit power between two or more rotating shafts. It consists of a series of interconnected links that engage with toothed sprockets to transfer motion and torque.

In a typical transmission chain system, the chain wraps around two or more sprockets, with one sprocket connected to the input shaft and the other(s) connected to the output shaft(s). As the input shaft rotates, the chain moves along the sprockets, causing the output shaft(s) to rotate at the same speed or different speeds depending on the sprocket sizes.

The functioning of a transmission chain relies on the principle of mechanical power transmission through interlocking links and the engagement between the chain and the sprocket teeth. The chain’s links are designed to fit precisely with the sprocket teeth, ensuring a positive and reliable transfer of power.

As the chain engages with the sprockets, the teeth on the sprockets push against the chain’s rollers or pins, causing the chain to move. This movement transfers rotational motion and torque from the input shaft to the output shaft(s), enabling the transmission of power and facilitating various mechanical operations.

Transmission chains are widely used in various applications such as automotive engines, motorcycles, bicycles, industrial machinery, and power transmission systems. They are valued for their durability, efficiency, and ability to handle high loads and speeds.

China Standard Bucket Elevator Transmission Chain Conveyor Bucket Chain Nse100
editor by CX 2024-05-06

China Standard Transmission Drive Conveyor Chain Roller Chain /Hollow Chain/Steel Pintle Chain

Product Description

Carbon Steel Roller Chain for Machines

Item	Carbon Steel Roller Chain	Model	Series A, Series B, Heavy Duty
Standard	ISO /DIN /ANSI	Material	Carbon steel 40Mn
Surface Teatment	Self-color/Sand-blasted/Shot-peening	Heat treatment	All parts are quenching and tempering
Certificate of Quality	ISO 9001: 2000, SGS	Brand	OEM
A Series	03C,04C-1,06C-1,085-1,08A-1,10A-1,12A-1,16A-1,20A-1,24A-1,28A-1,32A-1,36A-1,40A-1,48A-1,25-1,35-1,41-1,40-1,50-1,60-1,80-1,100-1,120-1,140-1,160-1,180-1,200-1,240-1.
	04C-2,06C-2,085-2,08A-2,10A-2,12A-2,16A-2,20A-2,24A-2,28A-2,32A-2,36A-2,40A-2,48A-2,25-2,35-2,41-2,40-2,50-2,60-2,80-2,100-2,120-2,140-2,160-2,180-2,200-2,240-2.
	04C-3,06C-3,085-3,08A-3,10A-3,12A-3,16A-3,20A-3,24A-3,28A-3,32A-3,36A-3,40A-3,48A-3,25-3,35-3,41-3,40-3,50-3,60-3,80-3,100-3,120-3,140-3,160-3,180-3,200-3,240-3.
B Series	05B-1,06B-1,08B-1,10B-1,12B-1,16B-1,20B-1,24B-1,28B-1,32B-1,40B-1,48B-1,56B-1,64B-1,72B-1.
	05B-2,06B-2,08B-2,10B-2,12B-2,16B-2,20B-2,24B-2,28B-2,32B-2,40B-2,48B-2,56B-2,64B-2,72B-2.
	05B-3,06B-3,08B-3,10B-3,12B-3,16B-3,20B-3,24B-3,28B-3,32B-3,40B-3,48B-3,56B-3,64B-3,72B-3.
Heavy Duty Type	35H-1,40H-1,50H-1,60H-1,80H-1,100H-1,120H-1,140H-1,160H-1,180H-1,200H-1,240H-1.
	35H-2,40H-2,50H-2,60H-2,80H-2,100H-2,120H-2,140H-2,160H-2,180H-2,200H-2,240H-2.
	35H-3,40H-3,50H-3,60H-3,80H-3,100H-3,120H-3,140H-3,160H-3,180H-3,200H-3,240H-3.

Workshop

Advantages:
1) Mainly products including: Roller chain, Bush chain, Motorcyle chain, Leaf chain, Hollow pin chain, Welded steel chain, Block chain, Engineering chain, Agricultural chain.
2) 80% of our products are exported to Europe and USA, serving customers of top players of their industries;
3) Advanced production equipment, High precision die & mold equipment, and Excellent testing devices.

Packaging & Shipping

Polybag + Box + Carton box

FAQ

Why choose us
1. We are the manufacture.
2. We have 30 years experience of making chains and chain links.
3. Our design team has extensive experience in the chain design.
4. Best service and prompt delivery.
5. We offer various styles, size and colors to meet your requirement.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard:	Standard
Application:	Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery
Structure:	Roller Chain
Material:	Carbon Steel
Type:	Short Pitch Chain
Certification:	ISO9001:2015, GB/T19001-2016, ISO1400:20

Samples:	US$ 1/Foot 1 Foot(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

drive chain

What are the benefits of using a heat-resistant drive chain?

Using a heat-resistant drive chain offers several advantages in applications where high temperatures are present. Here is a detailed explanation:

A heat-resistant drive chain is specifically designed to withstand elevated temperatures without compromising its performance. The benefits of using such a chain include:

Enhanced Temperature Resistance: Heat-resistant drive chains are engineered to withstand high operating temperatures, typically ranging from several hundred degrees Celsius to over a thousand degrees Celsius. They are constructed using materials that can withstand thermal expansion, resist deformation, and maintain their mechanical properties at elevated temperatures.
Reliable Power Transmission: Heat-resistant drive chains provide reliable power transmission even in high-temperature environments. They maintain their integrity, strength, and dimensional stability, ensuring consistent and efficient power transfer from the driver to the driven machinery or equipment.
Reduced Downtime: The ability of a heat-resistant chain to withstand high temperatures reduces the risk of chain failure or premature wear. This results in reduced downtime for maintenance, replacement, and repair, leading to improved productivity and cost savings.
Extended Service Life: Heat-resistant drive chains are designed to have a prolonged service life even in hot and demanding environments. They exhibit excellent wear resistance, minimizing chain elongation and reducing the need for frequent replacements. This extends the chain’s lifespan and reduces overall maintenance costs.
Resistance to Corrosion and Oxidation: Heat-resistant chains are often manufactured using materials that exhibit good resistance to corrosion and oxidation at high temperatures. This prevents the formation of rust, scale, or other detrimental surface deposits, ensuring the chain’s optimal performance and longevity.
Compatibility with Lubricants: Heat-resistant chains are designed to work effectively with high-temperature lubricants. The materials used in their construction are compatible with these lubricants, allowing for proper lubrication even under extreme heat. This ensures smooth operation, reduces friction, and prevents premature wear and chain failure.
Application Versatility: Heat-resistant drive chains can be used in various industries and applications where high temperatures are present. They find applications in industries such as steel manufacturing, glass production, ceramics processing, foundries, and heat treatment facilities.

When selecting a heat-resistant drive chain, it is important to consider the specific requirements of the application, including temperature range, load capacity, speed, and environmental conditions.

Regular inspection, lubrication, and proper maintenance are essential to ensure the optimal performance and longevity of heat-resistant drive chains in high-temperature environments.

By utilizing heat-resistant drive chains, operators can benefit from reliable power transmission, extended service life, reduced downtime, and enhanced performance in applications where high temperatures are a critical factor.

drive chain

Can a drive chain be used in a textile or garment manufacturing application?

Yes, a drive chain can be used in various textile and garment manufacturing applications. Here is a detailed explanation:

In textile and garment manufacturing, machinery and equipment are essential for processes such as spinning, weaving, knitting, dyeing, printing, and garment assembly. Drive chains offer several advantages in these applications:

Precise Power Transmission: Drive chains provide precise power transmission, ensuring accurate movement and synchronization of machine components involved in textile and garment manufacturing. They enable consistent and reliable operation throughout the manufacturing process.
High Load Capacity: Textile and garment manufacturing equipment often requires handling heavy loads, such as rolls of fabric or yarn. Drive chains have high load-carrying capacity, making them suitable for conveying, lifting, and driving mechanisms involved in material handling.
Smooth and Reliable Operation: Drive chains offer smooth and reliable operation, minimizing the risk of sudden stops or jerky movements that could affect the quality of textile or garment production. They ensure consistent motion and precise control of machine components.
Customization Options: Drive chains can be customized to suit specific textile and garment manufacturing applications. They are available in various sizes, pitches, and materials to accommodate different loads, speeds, and environmental conditions.
Compatibility with Auxiliary Components: Drive chains can be easily integrated with auxiliary components commonly used in textile and garment manufacturing machinery, such as tensioners, guides, sprockets, and bearings. This allows for efficient and reliable power transmission throughout the entire system.
Cost-Effectiveness: Drive chains offer a cost-effective solution for power transmission in textile and garment manufacturing. They have a long service life, reduced maintenance requirements, and lower replacement costs compared to some alternative power transmission systems.

It is important to consider the specific requirements of the textile or garment manufacturing application when selecting a drive chain. Factors such as load capacity, speed, environmental conditions, and maintenance considerations should be taken into account.

Regular maintenance, including inspection, lubrication, and tension adjustment, is crucial to ensure optimal performance and longevity of the drive chain in textile and garment manufacturing applications.

By utilizing drive chains in textile and garment manufacturing, operators can benefit from precise power transmission, reliable operation, and efficient production processes, contributing to high-quality textile and garment products.

drive chain

How do you inspect and maintain a drive chain?

To inspect and maintain a drive chain, follow these steps:

Regularly inspect the chain for signs of wear, damage, or elongation. Look for worn-out links, damaged rollers or plates, and signs of corrosion.
Clean the chain to remove dirt, debris, and any built-up lubricant. Use a suitable cleaning agent and a brush to carefully clean the chain, and ensure it is thoroughly dried before lubrication.
Check the tension of the chain to ensure it falls within the manufacturer’s specified range. Adjust the tension if necessary, following the manufacturer’s guidelines.
Inspect the alignment of the chain on the sprockets. Misalignment can cause uneven wear and decreased performance. Adjust the alignment if necessary, following the manufacturer’s instructions.
Apply the recommended lubricant to the chain as per the manufacturer’s guidelines. Proper lubrication reduces friction, minimizes wear, and prevents corrosion.
Periodically recheck the chain for any signs of wear, damage, or inadequate lubrication. Address any issues promptly through repairs or replacement of damaged components.

Monitor the chain’s overall condition during operation. Pay attention to any unusual noise, vibrations, or changes in performance, as these can indicate potential issues with the chain.

Inspect the sprockets for signs of wear, such as worn teeth or excessive tooth profile deviation. Worn sprockets can accelerate chain wear and reduce overall performance.

Check the chain for proper lubrication. Ensure that the lubricant is evenly distributed along the entire length of the chain and that there are no dry or excessively lubricated areas.

Measure the chain’s elongation using a chain wear gauge or by comparing its length to a new chain of the same pitch. Excessive elongation can lead to poor performance and should be addressed by replacing the chain.

Inspect the chain tensioners, guides, or tensioning systems (if applicable) for proper function and wear. These components help maintain proper tension and alignment of the chain.

Keep the chain free from dirt, debris, and contaminants that can accelerate wear and cause damage. Regularly clean the chain and its surrounding components using appropriate cleaning agents and methods.

Follow the manufacturer’s recommended maintenance schedule for the specific chain type and application. This may include periodic lubrication, tension adjustment, and component replacement.

Keep accurate records of maintenance activities, including inspection dates, lubrication intervals, and any maintenance or repair actions taken. This helps track the chain’s history and ensures proper maintenance over its lifespan.

Consult the manufacturer’s guidelines and specifications for specific maintenance requirements and recommendations for the particular drive chain model and application.

By following these inspection and maintenance practices, you can ensure that the drive chain remains in good condition, performs optimally, and has an extended service life.

China Standard Transmission Drive Conveyor Chain Roller Chain /Hollow Chain/Steel Pintle Chain
editor by CX 2024-05-06

China Standard Motorcycle Kit Transmissao Sprocket & Chain Fan/Titan 150 43t/16t/ 428h/118L

Product Description

Product Description

1) Material: C45 Steel, Cast Iron 40Cr, 42CrMo, stainless steel
2) Standard: DIN, ANSI, BS, JIS
3) Processing: Forging-Machining-Hobbing
4) Sprocket & Plat wheel in European Standard
5) REAR SPROCKET : 34T,35T,36T,37T,38T,39T,40T,41T,42T,43t ETC
6) Simplex, duplex, triplex
7) Surface Treatment: Carburizing, hardening and tempering, nitriding, high frequency treatment, black of oxidation, zincing, nickelage…
8) Customer’s drawings of sprockets are welcome

^{Company introduction}
DINGJIAN WHEEL Co., Ltd locates in Xihu (West Lake) Dis.qiao Industrial Zone which is renowned for the base of China Motorcycle Sprockets Manufacturing. Our company is a typical manufacturing enterprise with designing, manufacturing and selling as a whole service chain.
CZPT WHEEL Co., Ltd was set up in 1996, covering a total land of 12,000 square CZPT and a constructive area of 8,000 square meters. Under a total investment of 20 million RMB yuan, our company owns the most advanced production equipments, perfect quality inspection system, highly efficient sales and management team and first-class technicians; since we adopt advanced production techniques and superior steel, our products have reached high standard of durability and a series of advanced national level. As our products passed the authentication of global ISO9001 quality system, our company has the power of manufacturing a complete set of sprocket products to fit the needs of motorcycle factories.
Since the founding of CZPT WHEEL Co., Ltd, we uphold consistently the principles of laying full emphasis on needs of consumers, products’quality and commercial creditability; stressing the idea of common business aim, business starting, mutual benefits and developments, for building up Double Win relation with clients;our company has won the trust of a wide range of clients by competitive price and better service, this is why our company obtains better goodwill in this sprocket industry with our products selling well China-wide. and selling far to many regions like South-East Asia. Middle-East. South-America. Africa Europe and so on.
For many years, CZPT WHEEL Co., Ltd insisted on a development policy of Enterprise’ Life Relies on Products’ Quality, we are succeed in fulfilling our famous brand position. DINGJlAN people have confidence in our prosperous development, we will believe in the idea of Brand Relies on Quality, and Effectiveness Depends on Scale. By upholding our development idea, we can achieve our CZPT task of becoming leader in sprockets’ industry by persisting in our quality and management idea permanently. DINGJIAN WHEEL Co., Ltd is expecting your cooperation for mutual benefit producing.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Motorcycle, Machinery
Hardness:	Soft Tooth Surface
Gear Position:	External Gear

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

wheel sprocket

Calculating Torque Requirements for a wheel sprocket Assembly

Calculating the torque requirements for a wheel sprocket assembly involves considering various factors that contribute to the torque load. The torque requirement is crucial for selecting the appropriate motor or power source to drive the system effectively. Here’s a step-by-step guide:

1. Determine the Load Torque: Identify the torque required to overcome the resistance or load in the system. This includes the torque needed to move the load, overcome friction, and accelerate the load if applicable.
2. Identify the Sprocket Radius: Measure the radius of the sprocket (distance from the center of the sprocket to the point of contact with the chain or belt).
3. Calculate the Tension in the Chain or Belt: If using a chain or belt drive, calculate the tension in the chain or belt. Tension affects the torque required for power transmission.
4. Account for Efficiency Losses: Consider the efficiency of the system. Not all the input power will be converted into output power due to friction and other losses. Account for this efficiency in your calculations.
5. Use the Torque Equation: The torque (T) can be calculated using the following equation:
T = (Load Torque × Sprocket Radius) ÷ (Efficiency × Tension)

It’s essential to use consistent units of measurement (e.g., Newton meters or foot-pounds) for all values in the equation.

Remember that real-world conditions may vary, and it’s advisable to add a safety factor to your calculated torque requirements to ensure the system can handle unexpected peak loads or variations in operating conditions.

wheel sprocket

Special Considerations for Using a wheel sprocket System in Off-Road Vehicles

Off-road vehicles operate in rugged and challenging environments, which can put additional stress on the wheel sprocket system. Here are some special considerations to keep in mind when using a wheel sprocket system in off-road vehicles:

Material Selection: Choose high-quality materials for the wheel sprocket that can withstand rough terrains, impacts, and exposure to elements. Materials like hardened steel or alloys with good impact resistance are commonly used.
Sealing and Protection: Ensure that the wheel bearings and sprocket teeth are adequately sealed to prevent dirt, mud, water, and other debris from entering. Proper sealing helps to maintain smooth operation and prolong the lifespan of components.
Reinforcement: Consider reinforcing the wheel sprocket assembly if the vehicle will encounter heavy loads or extreme conditions. Reinforcements can add strength and durability to handle challenging off-road conditions.
Lubrication: Use a high-quality lubricant suitable for off-road conditions. Frequent lubrication is crucial to reduce friction, prevent corrosion, and protect components from wear and tear.
Regular Inspection: Off-road vehicles experience higher vibrations and shocks, leading to accelerated wear. Perform regular inspections to detect any signs of damage, misalignment, or wear. Address issues promptly to avoid further problems.
Shock Absorption: Consider incorporating shock-absorbing features or suspension systems to mitigate the impact on the wheel sprocket system during off-road driving. This helps to protect the components and improve overall vehicle performance.
Environmental Considerations: Off-road environments often expose the wheel sprocket system to dirt, sand, water, and other harsh elements. Choose coatings or treatments that offer corrosion resistance to protect against environmental damage.
Weight Consideration: Off-road vehicles may need to be lightweight to navigate difficult terrains effectively. Ensure the wheel sprocket components strike a balance between durability and weight to optimize vehicle performance.
Service and Maintenance: Establish a regular maintenance schedule and perform necessary servicing after each off-road trip. Cleaning, inspection, and replacement of worn parts are vital to ensure the system’s reliability.

By taking these special considerations into account, the wheel sprocket system in off-road vehicles can withstand the demands of rough terrains and provide reliable performance in challenging environments.

wheel sprocket

Eco-Friendly Materials for Manufacturing Wheels and Sprockets

Yes, there are eco-friendly materials used for manufacturing wheels and sprockets. As industries strive to reduce their environmental impact and promote sustainability, manufacturers are exploring alternative materials that are more environmentally friendly. Some of the eco-friendly materials used for manufacturing wheels and sprockets include:

1. Recycled Materials:

Using recycled materials, such as recycled plastic or metal, can significantly reduce the demand for virgin raw materials and lower the overall carbon footprint. These materials are obtained from post-consumer or post-industrial waste and processed to create new products, reducing the need for new resource extraction.

2. Biodegradable Materials:

Biodegradable plastics, such as PLA (polylactic acid) and PHA (polyhydroxyalkanoates), are derived from renewable plant sources and can break down naturally in the environment. These materials are gaining popularity for applications where disposal or end-of-life considerations are critical.

3. Sustainable Composites:

Manufacturers are developing sustainable composite materials that combine renewable fibers, such as bamboo, hemp, or flax, with biodegradable resins. These composites offer good strength and rigidity while being more environmentally friendly compared to traditional fiber-reinforced plastics.

4. Natural Materials:

In some cases, natural materials like wood or bamboo are used to create sprockets and wheels for specific applications. These materials are renewable and biodegradable, making them a more sustainable choice.

5. Low-Toxicity Materials:

Some eco-friendly materials focus on reducing the use of harmful chemicals during manufacturing. Low-toxicity materials are not only better for the environment but also for the health and safety of workers involved in the production process.

When selecting eco-friendly materials for wheels and sprockets, it’s essential to consider factors such as the specific application, load-bearing requirements, and the material’s end-of-life characteristics. Manufacturers and users can contribute to environmental sustainability by opting for these eco-friendly alternatives in their machinery and equipment.

China Standard Motorcycle Kit Transmissao Sprocket & Chain Fan/Titan 150 43t/16t/ 428h/118L
editor by Dream 2024-04-30

China high quality Stainless Steel Chain Plastic Drive Mechanical Industrial Standard Power China Supplyer Transmission Parts Silent Conveyor Leaf Hollow Pin Stainless Steel Chain

Product Description

Stainless Steel Chain Plastic Drive Mechanical Industrial Standard Power China Supplyer Transmission Parts Silent Conveyor Leaf Hollow Pin Stainless Steel Chain

Product Description

Stainless steel chains offer several advantages and distinctive features, including:

Corrosion resistance: One of the primary advantages of stainless steel chains is their exceptional resistance to corrosion. Stainless steel is highly resistant to rust, oxidation, and chemical degradation, even in harsh environments or exposure to moisture. This makes stainless steel chains suitable for applications in industries such as marine, food processing, pharmaceuticals, and chemical processing.
High strength and durability: Stainless steel chains are constructed from high-quality stainless steel materials, providing excellent strength and durability. They can withstand heavy loads, shock loads, and repetitive stress without deformation or failure, ensuring reliable operation and prolonged service life.
Cleanliness and hygiene: Stainless steel chains are easy to clean and maintain, making them ideal for applications requiring high levels of cleanliness and hygiene. They have a smooth surface finish that resists the accumulation of dirt, debris, or contaminants, making them suitable for industries such as food and beverage, where cleanliness is critical.
Temperature resistance: Stainless steel chains exhibit good heat resistance, allowing them to operate effectively in a wide temperature range. They can withstand both high and low temperatures without compromising their performance or structural integrity, making them suitable for various industrial applications.
Wide chemical compatibility: Stainless steel chains have excellent chemical compatibility, resisting the effects of various chemicals, acids, and alkalis. This makes them suitable for applications in industries such as chemical processing, wastewater treatment, and mining, where exposure to corrosive substances is common.
Versatility: Stainless steel chains are available in various sizes, configurations, and types to accommodate different applications. They can be used in industries such as automotive, manufacturing, packaging, agriculture, and more, offering versatility in power transmission, lifting, conveying, or restraining applications.
Environmental friendliness: Stainless steel chains are recyclable, making them an environmentally friendly choice. At the end of their service life, they can be melted down and reused, reducing waste and resource consumption.
Aesthetic appeal: Stainless steel chains have an attractive appearance, often characterized by a smooth and shiny finish. This makes them suitable for applications where aesthetics are important, such as architectural or decorative purposes.

In summary, the advantages of stainless steel chains include corrosion resistance, high strength and durability, cleanliness and hygiene, temperature resistance, wide chemical compatibility, versatility, environmental friendliness, and aesthetic appeal. These characteristics make stainless steel chains a preferred choice in various industries where reliability, longevity, resistance to harsh conditions, and aesthetic considerations are essential.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage:	Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material:	Stainless steel
Surface Treatment:	Oil Blooming
Feature:	Oil Resistant
Chain Size:	1/2"*3/32"
Structure:	Roller Chain

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

drive chain

What are the benefits of using a heat-resistant drive chain?

Using a heat-resistant drive chain offers several advantages in applications where high temperatures are present. Here is a detailed explanation:

A heat-resistant drive chain is specifically designed to withstand elevated temperatures without compromising its performance. The benefits of using such a chain include:

Enhanced Temperature Resistance: Heat-resistant drive chains are engineered to withstand high operating temperatures, typically ranging from several hundred degrees Celsius to over a thousand degrees Celsius. They are constructed using materials that can withstand thermal expansion, resist deformation, and maintain their mechanical properties at elevated temperatures.
Reliable Power Transmission: Heat-resistant drive chains provide reliable power transmission even in high-temperature environments. They maintain their integrity, strength, and dimensional stability, ensuring consistent and efficient power transfer from the driver to the driven machinery or equipment.
Reduced Downtime: The ability of a heat-resistant chain to withstand high temperatures reduces the risk of chain failure or premature wear. This results in reduced downtime for maintenance, replacement, and repair, leading to improved productivity and cost savings.
Extended Service Life: Heat-resistant drive chains are designed to have a prolonged service life even in hot and demanding environments. They exhibit excellent wear resistance, minimizing chain elongation and reducing the need for frequent replacements. This extends the chain’s lifespan and reduces overall maintenance costs.
Resistance to Corrosion and Oxidation: Heat-resistant chains are often manufactured using materials that exhibit good resistance to corrosion and oxidation at high temperatures. This prevents the formation of rust, scale, or other detrimental surface deposits, ensuring the chain’s optimal performance and longevity.
Compatibility with Lubricants: Heat-resistant chains are designed to work effectively with high-temperature lubricants. The materials used in their construction are compatible with these lubricants, allowing for proper lubrication even under extreme heat. This ensures smooth operation, reduces friction, and prevents premature wear and chain failure.
Application Versatility: Heat-resistant drive chains can be used in various industries and applications where high temperatures are present. They find applications in industries such as steel manufacturing, glass production, ceramics processing, foundries, and heat treatment facilities.

When selecting a heat-resistant drive chain, it is important to consider the specific requirements of the application, including temperature range, load capacity, speed, and environmental conditions.

Regular inspection, lubrication, and proper maintenance are essential to ensure the optimal performance and longevity of heat-resistant drive chains in high-temperature environments.

drive chain

Can a drive chain be used in a marine or offshore environment?

Yes, drive chains can be used in marine or offshore environments with proper considerations and appropriate chain selection. Here is a detailed explanation:

In marine or offshore applications, where machinery and equipment operate in challenging conditions such as saltwater exposure, humidity, and corrosive environments, the use of drive chains requires specific measures:

Corrosion Resistance: When selecting a drive chain for marine or offshore environments, it is crucial to choose a chain made from corrosion-resistant materials such as stainless steel or coated chains. These materials can withstand the corrosive effects of saltwater and other harsh elements.
Sealing and Protection: Additional sealing and protection measures can be employed to safeguard the chain from water ingress and contamination. This may include the use of protective covers, seals, or enclosures to prevent direct exposure to seawater and other corrosive substances.
Lubrication: Regular and appropriate lubrication is vital to protect the chain against corrosion and ensure smooth operation. Lubricants specifically designed for marine or offshore applications should be used to withstand the demanding conditions and provide effective protection.
Maintenance: A comprehensive maintenance program is essential for maximizing the lifespan of a drive chain in marine or offshore environments. Regular inspection, cleaning, lubrication, and monitoring of the chain’s condition are necessary to identify and address any signs of corrosion, wear, or damage.
Environmental Considerations: Factors such as saltwater spray, wave impact, vibration, and temperature variations should be taken into account when designing and operating the machinery and equipment. Adequate shielding, proper drainage, and suitable ventilation can help mitigate the potential detrimental effects on the drive chain.

By considering these factors and implementing appropriate measures, drive chains can be successfully utilized in marine or offshore environments, providing reliable power transmission in applications such as ship propulsion systems, offshore drilling rigs, marine winches, and more.

China high quality Stainless Steel Chain Plastic Drive Mechanical Industrial Standard Power China Supplyer Transmission Parts Silent Conveyor Leaf Hollow Pin Stainless Steel Chain
editor by CX 2024-04-29

China Custom Best Quality Advanced Surface Treatment Industrial Chain Stainless Steel Sprockets with Standard Dimension

Product Description

Best Quality Advanced Surface Treatment Industrial Chain Stainless Steel Sprockets with Standard Dimension

Product Description

1. Produce strictly in accordance with standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316
3. Standard: ANSI, DIN, JINS, ISO, KANA,Standard America or Customer’s Drawing
4. Pilot bore, finished bore, taper bore and special bore.
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price.
8. Welcome OEM / ODM
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).

Detailed Photos

View more products,please click here…

Company Profile

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard:	Standard
Application:	Machinery, Agricultural Machinery, Industry
Hardness:	Soft Tooth Surface
40:	1/2"
50:	5/8"
60:	3/4"

Samples:	US$ 0.9/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

wheel sprocket

Compatibility of Chain Sprockets with Wheels

In general, chain sprockets are designed to work with specific types of wheels, and there are certain requirements for ensuring proper compatibility:

Chain Size and Pitch: The chain sprocket must match the size and pitch of the chain it is intended to work with. For example, if you have a roller chain with a pitch of 0.625 inches, you need a sprocket with the same pitch to ensure a proper fit.
Number of Teeth: The number of teeth on the sprocket should be compatible with the number of chain links. The chain should mesh smoothly with the sprocket without any binding or skipping.
Tooth Profile: The tooth profile of the sprocket should match the shape of the chain’s rollers to ensure smooth engagement and minimize wear.
Shaft Size: The center hole (bore) of the sprocket should match the diameter of the shaft it will be mounted on. Using the correct shaft size ensures a secure fit and prevents wobbling.
Hub Configuration: Some sprockets have hubs, which are extensions on either side of the sprocket. The hub’s length and configuration should match the requirements of the specific application.
Material and Strength: Consider the material and strength of the sprocket based on the application’s load and environmental conditions. Heavy-duty applications may require sprockets made of robust materials to withstand the forces and stresses.

It’s crucial to follow the manufacturer’s specifications and guidelines when selecting a chain sprocket for a particular wheel. Mixing incompatible sprockets and wheels can result in premature wear, inefficiencies, and potential safety hazards. If you are unsure about the compatibility, consult with the manufacturer or a knowledgeable expert to ensure you choose the right sprocket for your specific application.

wheel sprocket

Noise and Vibration in wheel sprocket Configurations

In a wheel sprocket configuration, noise and vibration levels can vary depending on several factors:

Quality of Components: The quality of the wheel sprocket components can significantly impact noise and vibration. Well-manufactured and precisely engineered components tend to produce less noise and vibration.
Lubrication: Proper lubrication of the sprocket teeth and chain or belt can reduce friction, which in turn helps minimize noise and vibration.
Alignment: Correct alignment between the wheel sprocket is crucial. Misalignment can lead to increased noise and vibration as the components may not mesh smoothly.
Tension: Maintaining the appropriate tension in the chain or belt is essential. Insufficient tension can cause the chain to slap against the sprocket teeth, resulting in noise and vibration.
Speed and Load: Higher speeds and heavier loads can lead to increased noise and vibration levels in the system.
Wear and Damage: Worn-out or damaged components can create irregularities in motion, leading to increased noise and vibration.

To reduce noise and vibration in a wheel sprocket setup:

Use high-quality components from reputable suppliers.
Ensure proper lubrication with appropriate lubricants.
Regularly inspect and maintain the system to detect any misalignment, wear, or damage.
Follow manufacturer guidelines for chain or belt tensioning.
Consider using vibration-damping materials or mounting methods if necessary.

Minimizing noise and vibration not only improves the comfort and safety of the machinery but also extends the life of the components by reducing wear and fatigue.

wheel sprocket

Common Applications of Wheels and Sprockets in Machinery

Wheels and sprockets are crucial components used in various machinery and mechanical systems for power transmission, motion control, and mechanical advantage. Some common applications include:

1. Vehicles:

2. Industrial Machinery:

3. Agricultural Equipment:

Agricultural machinery often relies on wheels and sprockets for functions such as driving tractors, operating harvesting equipment, and propelling irrigation systems.

4. Robotics:

5. Material Handling:

6. Mining and Construction:

7. Factory Automation:

In automated manufacturing processes, wheels and sprockets are employed in robotic arms and assembly line systems to control movement and manipulate objects with precision.

8. Renewable Energy:

In wind turbines, wheels and sprockets are used to convert the rotational motion of the blades into electrical energy by driving the generator.

China Custom Best Quality Advanced Surface Treatment Industrial Chain Stainless Steel Sprockets with Standard Dimension
editor by Dream 2024-04-26

China Professional 08B ISO Standard Industrial Transmission Roller Chain

Product Description

Detailed Photos

Product Description

Item Name	Standrad transmission Roller Chains	Model	Series A, Series B
Row	Simplex Duplex Triplrex	Application	Machinery Parts
Suiface Treament	netural/sand-blasted/shot-peening	Certification	ISO, ANSI, DIN, BS
Packing	Packaged in boxes and wooden cases, or packaged in reels and then on pallets	Port	Any sea port or airport in china

Standard roller chains are a type of industrial chain that is commonly used in power transmission
applications. They consist of a series of cylindrical rollers that are linked together by side plates.
The rollers rotate within the links, transmitting power from 1 sprocket to another.

Standard roller chains are available in a range of sizes and configurations to fit different industrial
applications. They are made from high-quality materials, such as carbon steel or stainless steel,
which are resistant to wear, corrosion, and fatigue.

These chains are designed to provide smooth and efficient power transmission, with minimal energy
loss. They have a high load-bearing capacity, making them suitable for use in heavy-duty machinery,
such as conveyors, elevators, and industrial equipment.

Standard roller chains are also easy to install and maintain, with simple lubrication requirements to
ensure long-lasting performance. Overall, they offer a reliable and cost-effective solution for power
transmission in a wide range of industrial applications.

Other Products

Company Profile

Packaging & Shipping

After Sales Service

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard:	Standard
Application:	Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery
Surface Treatment:	Netural/Sand-Blasted/Shot-Peening
Material:	Carbon Steel
Type:	Short Pitch Chain
Surface:	Shot Peening, Black, Blue or Original

Samples:	US$ 1.28/Meter 1 Meter(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

transmission chain

How does the choice of chain attachment type affect the versatility of a transmission chain?

The choice of chain attachment type has a significant impact on the versatility and functionality of a transmission chain. Here’s a detailed answer to the question:

The attachment type refers to the specific design or configuration of the links or plates at the ends of the transmission chain. Different attachment types are available to accommodate various applications, equipment, and industry requirements. The selection of the right attachment type affects the chain’s versatility in the following ways:

1. Connection and Compatibility: The chain attachment type determines how the chain connects and interacts with other components in the system. It should be compatible with the equipment, sprockets, gears, or other mechanisms to ensure proper functioning and power transmission. Different attachment types may be required for different machinery or applications, such as conveyors, elevators, or industrial machinery.

2. Load Capacity and Strength: The attachment type influences the load capacity and strength of the transmission chain. Some attachment designs provide increased load-bearing capacity, allowing the chain to handle heavy loads or withstand high-torque applications. By choosing the appropriate attachment type, the chain’s versatility can be enhanced to suit a wide range of load requirements.

3. Flexibility and Adaptability: Certain attachment types offer greater flexibility and adaptability in terms of accommodating variations in equipment design or layout. They may allow for easier adjustment, tensioning, or lengthening of the chain to fit specific requirements. This flexibility enables the chain to be more versatile and adaptable to different configurations or changes in the operating environment.

4. Specific Application Requirements: Depending on the application, specific chain attachment types may be necessary to meet industry standards, safety regulations, or operational needs. For example, certain industries may require specialized attachments to ensure proper alignment, positioning, or engagement with specific components or materials. Choosing the appropriate attachment type ensures compliance with these requirements, enhancing the chain’s versatility for specific applications.

5. Easy Maintenance and Replacement: The choice of attachment type can also impact the ease of maintenance and replacement of the transmission chain. Some attachment designs allow for quick and convenient disassembly or replacement of damaged or worn-out chain links or plates. This facilitates efficient maintenance and reduces downtime, contributing to the overall versatility and reliability of the chain.

When selecting a transmission chain, it’s crucial to consider the specific attachment type required for the intended application. Factors such as load capacity, compatibility with equipment, ease of maintenance, and industry standards should be considered to ensure optimal versatility and performance of the transmission chain.

transmission chain

How does the choice of lubrication method impact the performance of a transmission chain?

The choice of lubrication method plays a crucial role in the performance and longevity of a transmission chain. Here’s a detailed answer to the question:

1. Reduced Friction and Wear: Proper lubrication ensures a thin film of lubricant between the moving parts of the transmission chain, reducing friction and minimizing wear. This helps to maintain the integrity of the chain’s components, such as pins, rollers, and bushings, by preventing metal-to-metal contact and reducing surface damage.

2. Heat Dissipation: Lubrication helps in dissipating heat generated during the operation of the transmission chain. By reducing friction and providing a cooling effect, the lubricant helps to prevent overheating, which can lead to premature wear, deformation, or failure of the chain.

3. Corrosion Protection: Lubricants often contain additives that offer corrosion protection to the transmission chain. These additives create a protective barrier against moisture, chemicals, and other corrosive elements, preventing rust formation and maintaining the chain’s performance in corrosive environments.

4. Noise Reduction: Adequate lubrication reduces the noise generated by the movement of the transmission chain. The lubricant acts as a cushion between the contacting surfaces, dampening vibrations and minimizing the noise levels produced during operation. This contributes to a quieter and smoother chain operation.

5. Extended Lifespan: Proper lubrication helps to extend the lifespan of the transmission chain. By reducing friction, wear, and the accumulation of debris, lubrication minimizes the stress on the chain’s components, resulting in improved durability and reduced likelihood of premature failure.

6. Operational Efficiency: A well-lubricated transmission chain operates with higher efficiency. With reduced friction, the chain experiences less power loss, enabling more effective power transmission. This leads to improved overall system efficiency, reduced energy consumption, and lower operating costs.

7. Contamination Prevention: Lubrication acts as a barrier, preventing contaminants, such as dust, dirt, and debris, from entering the chain’s components. This helps to maintain the cleanliness of the chain, reducing the risk of abrasive wear and preserving the integrity of its parts.

It’s important to consider the specific operating conditions, such as temperature, speed, load, and environment, when selecting the lubrication method for a transmission chain. Factors such as the viscosity, temperature range, and compatibility of the lubricant with the chain material should be taken into account to ensure optimal lubrication performance.

transmission chain

How do roller chains differ from other types of transmission chains?

Roller chains, also known as roller link chains, are a commonly used type of transmission chain that distinguishes itself from other chains in several ways:

Design: Roller chains consist of inner and outer plates, pins, bushings, and rollers. The rollers, which are free to rotate, help reduce friction and wear, resulting in smoother and more efficient power transmission.
Wide Application: Roller chains are versatile and widely used in various industries, including automotive, industrial machinery, agricultural equipment, and conveyor systems.
High Load Capacity: Roller chains are designed to withstand high loads and offer excellent tensile strength, making them suitable for applications that require heavy-duty performance.
Efficiency: Roller chains are known for their high efficiency in transmitting power. The roller design minimizes friction, resulting in less energy loss and improved overall efficiency.
Cost-Effectiveness: Roller chains are relatively cost-effective compared to some other specialized transmission chains, making them a popular choice in many applications.

While roller chains have their advantages, it’s important to note that different types of transmission chains may be more suitable for specific applications. Factors such as load capacity, speed, noise level, and environmental conditions should be considered when selecting the appropriate transmission chain for a particular application.

China Professional 08B ISO Standard Industrial Transmission Roller Chain
editor by CX 2024-04-26

China OEM Standard Chains and Special CZPT Color CZPT Drive Roller Chain

Product Description

ISO16949: 2009 Approved Industrial Chain

Why Choose Us?

1. HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd established in 1991, we have 5 subsidiaries in china and have 6 subsidiaries abroad;
2. we covering a production area of 200,100 square meters, have more than 1,800 sets of advanced equipment and over 3,100 highly skilled employees, the annual production capacity has exceeded 20,000,000meters;
3. we specialized in producing all kinds of standard chains and special chains, such as A or B series chains, driving chains, conveyor chains, hoisting chains, agricultural chains, sprockets, industrial chains, sprockets, gears, wheels and so on;
4. we have obtained ISO9001, ISO14001, ISO16969, AAA and API certificates.

5. Our partners among world top enterprises, such as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, etc.

1. Industrial Chain Parts

2. Production flow chart
1. Incoming material
2. Inspection
3. Production of chain board (cold roll steel/punch/heat treatment/shot blasting/cleaning)
4. Production of roller(burr wiping & smear/heat treatment/wiping grinding/cleaning)
5. Production of quill(burr wiping & smear/centerless cylindrical grinding/heat treatment/shining)
6. Production of shaft(cutting/chamfering/heat treatment/ centerless cylindrical grinding/cleaning)
7. Assembling
8. Final inspection
9. Packing

3. Certificate

4. Company Information

HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd was founded in 1 9 9 1, and now it has five wholly owned subsidiaries, one in ZheJiang province, other four in HangZhou, ZHangZhoug province, it is a professional manufacturer of chains, sprockets, tooth gears and various power transmission products.

The group has XIHU (WEST LAKE) DIS.HUA, ZIQIANG brands, is focused on producing all variety of standard roller chains and special chains, such as conveyor chain, stainless steel chain, agricultural chain. With Xihu (West Lake) Dis.hua brand registered in more than 70 countries like America, Europe, Japan, it is building long term cooperation with these world top enterprises, such as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR.

There is a technical center of province level, Xihu (West Lake) Dis.hua academician working station, experiment station for Xihu (West Lake) Dis.hua post doctors, and national hundreds of program set up in Xihu (West Lake) Dis.hua group. With these platforms and strong technical ability, the more than hundreds of Engineers and technicians have developed all variety of special high precise and high strength products, conducted mold programs for key components in the car and national industry revitalizing program.

Great attention has been paid on environmental protection and energy saving. The product well displays environmental protection and energy saving. In the year of 2 0 0 0, Xihu (West Lake) Dis.hua took the lead in gaining I S O 1 4 0 0 1 environment management certificate and thereafter passed the inspection of clean production and recycling economy, winning the title of “ZHangZhoug Green Enterprise”.

“We are always serving our customers with our best products.”

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage:	Conveyor Chain
Material:	Alloy/Carbon Steel
Surface Treatment:	Electroplating
Feature:	Heat Resistant
Chain Size:	1/2"*11/128"
Structure:	Roller Chain

Customization:	Available \| Customized Request

drive chain

What are the benefits of using a maintenance-free drive chain?

Using a maintenance-free drive chain offers several advantages in applications where minimal maintenance and high reliability are desired. Here is a detailed explanation:

A maintenance-free drive chain, also known as a self-lubricating chain, is designed to operate without the need for regular lubrication or maintenance. The benefits of using such a chain include:

Reduced Downtime: Maintenance-free drive chains eliminate the need for regular lubrication and associated maintenance tasks. This saves time and reduces the frequency of equipment shutdowns for lubrication and maintenance, resulting in increased productivity and reduced downtime.
Lower Maintenance Costs: Maintenance-free chains require less maintenance, which leads to cost savings. There is no need for purchasing lubricants, scheduling routine maintenance, or performing frequent lubrication tasks. This can result in significant cost savings over the life of the chain.
Increased Reliability: Maintenance-free chains are designed to provide reliable and consistent performance over extended periods without the need for lubrication. They are constructed using self-lubricating materials or have built-in lubrication systems, ensuring optimal chain operation and minimizing the risk of chain failure due to inadequate lubrication.
Extended Service Life: Maintenance-free chains are often engineered with materials that exhibit excellent wear resistance and self-lubricating properties. This extends the chain’s service life by reducing wear, elongation, and the need for frequent replacements. The chains maintain their performance characteristics even in demanding environments.
Cleaner Operation: Maintenance-free chains do not require external lubrication, which eliminates the risk of lubricant splatter or contamination. This is particularly beneficial in applications where cleanliness is essential, such as food processing, pharmaceuticals, or cleanroom environments. The absence of lubrication also reduces the attraction of dust or debris, contributing to cleaner and more reliable operation.
Environmentally Friendly: Maintenance-free chains can contribute to environmental sustainability. The elimination of routine lubrication reduces the consumption of lubricants and minimizes the release of lubricants into the environment. This aligns with eco-friendly practices and reduces the overall environmental impact of the equipment.
Application Versatility: Maintenance-free chains can be used in various industries and applications where minimal maintenance is desired or where lubrication is challenging or not feasible. They find applications in industries such as food processing, packaging, automation, automotive, and many others.

It is important to note that while maintenance-free chains offer many benefits, they still require regular inspection and occasional cleaning to ensure optimal performance and detect any abnormal wear or damage.

When selecting a maintenance-free chain, it is crucial to consider factors such as load capacity, speed, environmental conditions, and compatibility with the specific application requirements.

By utilizing maintenance-free drive chains, operators can benefit from reduced downtime, lower maintenance costs, increased reliability, extended service life, cleaner operation, environmental friendliness, and application versatility.

drive chain

What are the benefits of using a silent drive chain?

Using a silent drive chain, also known as a noise-reduced or low-noise chain, offers several benefits compared to standard drive chains. Here is a detailed explanation of the benefits of using a silent drive chain:

Noise Reduction: The primary benefit of a silent drive chain is its ability to reduce noise during operation. Silent chains are designed with specialized features that minimize vibration and noise generation, resulting in quieter operation compared to standard chains. This is particularly advantageous in applications where noise reduction is critical, such as in residential areas, offices, or noise-sensitive environments.
Smooth Operation: Silent drive chains are engineered to provide smoother operation with reduced friction and vibration. This results in improved overall system performance, reduced wear on components, and enhanced efficiency.
Improved Performance: By reducing noise, vibration, and chain backlash, silent drive chains can help improve the performance and accuracy of the driven system. They minimize the risk of unwanted oscillations or inaccuracies, ensuring precise and reliable power transmission.
Extended Service Life: The reduced friction and vibration in a silent drive chain contribute to less wear and stress on the chain and associated components. This can result in an extended service life compared to standard chains, reducing the frequency of replacements and maintenance requirements.
High-Speed Capability: Silent drive chains are designed to operate at high speeds without compromising performance or generating excessive noise. This makes them suitable for applications that require high-speed power transmission, such as machinery, conveyors, or automation systems.
Reliability: Silent drive chains maintain the same reliability and durability as standard chains. They are designed to withstand demanding operating conditions, provide high load-carrying capacity, and resist wear, fatigue, and corrosion.

The use of silent drive chains is particularly beneficial in applications where noise reduction, smooth operation, precise control, and extended service life are important considerations. It is important to select the appropriate silent chain type, size, and material based on the specific application requirements for optimal performance and noise reduction.

China OEM Standard Chains and Special CZPT Color CZPT Drive Roller Chain
editor by CX 2024-04-25

China Standard Qld8 1 Inch Centre Guide Hdl650 Low Noise Gear Box Inverted Tooth Transmission Silent Chain

Product Description

Products Collection

Product Description

Our QLD series silent chain is a power transmission chain designed for high-speed and high-torque applications. It is known for its quiet operation, long life, and high efficiency.
The chain features a high-strength construction that allows it to handle heavy loads and high speeds without stretching or breaking.

When you need a specific design, we can provide customised solutions based on what you need. Whether you require specific features, plans, materials, or specifications, our team can work to ensure you get a chain that fully meets your needs.
Are you looking for other chains?
Leave your message below, and feel free to contact us!

FAQ

Question 1: Are you a Manufacturer or a Trading Company?

Answer:
We are a 100% chain manufacturer with 23 years of experience

Question 2: What should I provide to get a quotation?

Answer:
1. Type of the chain (with photos if available)
2. Pitch of the chain
3. Width of the chain
4. Length and quantity of the chain
5. Other specific requirements

Question 3: How long is your manufacturing and delivery time?

Answer:
Products are usually finished in 2 weeks, depending on the type and quantity. Also, please get in touch with us to check the delivery time to your destination.

Question 4: How long is your guaranteed time?

Answer:
We offer a three-year guarantee if you purchase chains and matched sprockets together.
If you need chains only, a one-year guarantee can also be confirmed.

Question 5: Trade terms and Payment terms?

Answer:
We accept EXW, FOB, DDU, Door to Door. Payment terms, such as T/T, L/C, and Western Union, are acceptable. We also provide the service of Online Trading in this B2B platform.

Company Profile

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard:	Standard
Application:	Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Marine, Mining Equipment, Agricultural Machinery
Structure:	Tooth Chain

Samples:	US$ 100/Meter 1 Meter(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

transmission chain

How does the elongation of a transmission chain affect its lifespan?

Transmission chains are subject to gradual elongation over time as a result of wear and fatigue. The elongation of a transmission chain refers to the increase in its length due to the stretching of the chain’s components. Here’s a detailed explanation of how elongation affects the lifespan of a transmission chain:

1. Increased Slack: As a transmission chain elongates, it develops more slack between the chain links. The increased slack reduces the chain’s tension and can negatively impact its performance. Excessive slack can lead to chain skipping, misalignment, and reduced power transmission efficiency. This can cause vibrations, noise, and accelerated wear on the chain and sprockets.

2. Accelerated Wear: Elongation puts additional stress on the chain’s pins, bushings, and rollers. The increased tension and movement between the chain’s components lead to accelerated wear and fatigue. This can result in chain elongation becoming a self-perpetuating problem, as the worn components further contribute to elongation and reduced performance.

3. Decreased Load Capacity: Elongation reduces the effective pitch length of the transmission chain, resulting in decreased load-carrying capacity. The reduced load capacity can limit the chain’s ability to handle heavy loads or transmit power effectively. This can lead to premature failure or damage to the chain and associated machinery.

4. Increased Maintenance Requirements: Elongated transmission chains require more frequent maintenance and adjustment to maintain proper tension and performance. Regular monitoring and adjustment of chain tension are necessary to minimize wear, prevent excessive elongation, and ensure optimal power transmission. Failure to address elongation promptly can lead to more severe damage to the chain and other components, resulting in costly repairs and downtime.

5. Reduced Service Life: The elongation of a transmission chain directly affects its service life. As the chain elongates, its performance, efficiency, and load-carrying capacity gradually deteriorate. The rate of elongation depends on various factors such as chain quality, operating conditions, lubrication, and maintenance practices. Over time, if elongation is not addressed, the chain may become unable to perform its intended function effectively, leading to chain failure and the need for replacement.

To mitigate the negative effects of elongation and extend the lifespan of a transmission chain, regular maintenance, including proper lubrication and tension adjustment, is crucial. Periodic inspections for signs of wear, elongation, and fatigue should be conducted to identify potential issues early and take appropriate corrective measures. Additionally, selecting high-quality chains and following manufacturer recommendations for installation, operation, and maintenance can help minimize elongation and maximize the chain’s lifespan.

transmission chain

Can transmission chains be used in power transmission systems?

Yes, transmission chains can be used in power transmission systems. Here’s a detailed answer to the question:

Transmission chains are commonly employed in various power transmission applications where the transfer of mechanical power is required. These chains are designed to transmit rotational motion and power from one shaft to another.

Transmission chains are used in a wide range of power transmission systems, including:

Industrial Machinery: Transmission chains are used in machinery such as conveyor systems, packaging equipment, printing presses, and machine tools to transfer power and motion between different components.
Agricultural Equipment: Transmission chains are utilized in farm machinery like tractors, combines, and harvesters to transmit power from the engine to various mechanical components for tasks like cutting, threshing, and planting.
Automotive: Transmission chains can be found in certain automotive applications, such as motorcycle drive chains or timing chains that synchronize the rotation of the crankshaft and camshaft in internal combustion engines.
Power Generation: Transmission chains are employed in power generation systems, including wind turbines, hydroelectric turbines, and steam turbines, to transmit rotational motion from the turbine to the generator.
Construction Equipment: Transmission chains are used in construction equipment like excavators, loaders, and bulldozers to transfer power and motion from the engine to the drivetrain and various hydraulic components.

Transmission chains offer several advantages in power transmission systems:

High Efficiency: Transmission chains have minimal power losses, allowing for efficient power transfer.
High Load Capacity: Transmission chains are capable of handling high loads and transmitting substantial amounts of power.
Flexibility: Transmission chains can be easily customized to fit different applications, with various sizes, lengths, and configurations available.
Durability: Transmission chains are designed to withstand heavy-duty applications and offer long service life when properly maintained.
Cost-Effective: Transmission chains are often a cost-effective solution compared to other power transmission options.

It’s important to select the appropriate type and size of transmission chain based on the specific requirements of the power transmission system. Regular maintenance and lubrication are also essential to ensure optimal performance and longevity of the transmission chain.

transmission chain

Are there specific lubrication requirements for transmission chains?

Yes, transmission chains typically require proper lubrication to ensure smooth operation, reduce wear, and prolong their service life. Here are some key points regarding lubrication requirements for transmission chains:

Clean and Adequate Lubrication: It is important to keep the chain adequately lubricated to minimize friction and wear between the chain components. Lubrication helps reduce heat generation and prevents metal-to-metal contact, which can lead to premature wear and failure.
Appropriate Lubricant Selection: Choosing the right lubricant is crucial for optimal chain performance. Factors to consider when selecting a lubricant include the application temperature, load conditions, speed, and environmental factors. Lubricants should have good adhesion properties, resist oxidation, and provide sufficient film strength to protect the chain surfaces.
Proper Lubrication Interval: Regular lubrication at appropriate intervals is necessary to maintain the chain’s performance and reduce the risk of excessive wear. The lubrication frequency depends on the operating conditions and the specific lubricant used. Manufacturers usually provide recommendations for lubrication intervals based on the chain type and application.
Effective Lubrication Application: Proper application of lubricant is essential to ensure uniform coverage and penetration into the chain components. The lubricant should be applied to the inner link plates, roller surfaces, and pin-bushing interfaces. Excess lubricant should be removed to prevent buildup and contamination.
Environmental Considerations: In certain environments, such as dusty or dirty conditions, the chain may require more frequent lubrication to prevent the ingress of contaminants and maintain proper lubrication film. Additionally, in high-temperature or high-speed applications, special high-temperature or high-speed lubricants may be necessary.
Regular Inspection and Maintenance: Along with proper lubrication, regular inspection and maintenance of the transmission chain are essential. This includes checking for signs of wear, lubricant degradation, and proper tension. Any damaged or worn components should be replaced promptly to prevent chain failure.

Following the manufacturer’s recommendations and adhering to the specific lubrication requirements for the transmission chain will help ensure optimal performance, reduce wear, and extend the chain’s lifespan.

China Standard Qld8 1 Inch Centre Guide Hdl650 Low Noise Gear Box Inverted Tooth Transmission Silent Chain
editor by CX 2024-04-24