Tag Archives: china conveyor roller chains

China Custom Chains Wheel Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains China High-Intensity Chain Gear and High Wear Resistance Chain Sprocket

Product Description

SPROCKET 5/8” X 3/8” 10B SERIES SPROCKETS

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius r3					16.0mm
Radius Width C					1.6mm
Tooth Width b1					9.0mm
Tooth Width B1					9.1mm
Tooth Width B2					25.5mm
Tooth Width B3					42.1mm
10B SERIES ROLLER CHAINS
Pitch					15.875 mm
Internal Width					9.65 mm
Roller Diameter					10.16 mm

Z	de	dp	SIMPLEX			DUPLEX			TRIPLEX
Z	de	dp	dm	D1	A	dm	D2	A	dm	D3	A
8	47.0	41.48	25	10	25	25	12	40	25	12	55
9	52.6	46.42	30	10	25	30	12	40	30	12	55
10	57.5	51.37	35	10	25	35	12	40	35	12	55
11	63.0	56.34	37	12	30	39	14	40	39	16	55
12	68.0	61.34	42	12	30	44	14	40	44	16	55
13	73.0	66.32	47	12	30	49	14	40	49	16	55
14	78.0	71.34	52	12	30	54	14	40	54	16	55
15	83.0	76.36	57	12	30	59	14	40	59	16	55
16	88.0	81.37	60	12	30	64	16	45	64	16	60
17	93.0	86.39	60	12	30	69	16	45	69	16	60
18	98.3	91.42	70	14	30	74	16	45	74	16	60
19	103.3	96.45	70	14	30	79	16	45	79	16	60
20	108.4	101.49	75	14	30	84	16	45	84	16	60
21	113.4	106.52	75	16	30	85	16	45	85	20	60
22	118.0	111.55	80	16	30	90	16	45	90	20	60
23	123.5	116.58	80	16	30	95	16	45	95	20	60
24	128.3	121.62	80	16	30	100	16	45	100	20	60
25	134.0	126.66	80	16	30	105	16	45	105	20	60
26	139.0	131.70	85	20	35	110	20	45	110	20	60
27	144.0	136.75	85	20	35	110	20	45	110	20	60
28	148.7	141.78	90	20	35	115	20	45	115	20	60
29	153.8	146.83	90	20	35	115	20	45	115	20	60
30	158.8	151.87	90	20	35	120	20	45	120	20	60
31	163.9	156.92	95	20	35	120	20	45	120	20	60
32	168.9	161.95	95	20	35	120	20	45	120	20	60
33	174.5	167.00	95	20	35	120	20	45	120	20	60
34	179.0	172.05	95	20	35	120	20	45	120	20	60
35	184.1	177.10	95	20	35	120	20	45	120	20	60
36	189.1	182.15	100	20	35	120	20	45	120	25	60
37	194.2	187.20	100	20	35	120	20	45	120	25	60
38	199.2	192.24	100	20	35	120	20	45	120	25	60
39	204.2	197.29	100	20	35	120	20	45	120	25	60
40	209.3	202.34	100	20	35	120	20	45	120	25	60
41	214.8	207.38	*100	20	40	120	20	50	*130	25	60
42	2,199	212.43	*100	20	40	120	20	50	*130	25	60
43	224.9	217.48	*100	20	40	120	20	50	*130	25	60
44	230.0	222.53	*100	20	40	120	20	50	*130	25	60
45	235.0	227.58	*100	20	40	*120	20	50	*130	25	60
46	240.1	232.63	*100	20	40	*120	20	50	*130	25	60
47	245.1	237.68	*100	20	40	*120	20	50	*130	25	60
48	250.2	242.73	*100	20	40	*120	20	50	*130	25	60
49	255.2	247.78	*100	20	40	*120	20	50	*130	25	60
50	260.3	252.82	*100	20	40	*120	20	50	*130	25	60
51	265.3	257.87	*100	20	40	*120	20	50	*130	25	60
52	270.4	262.92	*100	20	40	*120	20	50	*130	25	60
53	275.4	267.97	*100	20	40	*120	20	50	*130	25	60
54	280.5	273.03	*100	20	40	*120	20	50	*130	25	60
55	285.5	278.08	*100	20	40	*120	20	50	*130	25	60
56	290.6	283.13	*100	20	40	*120	20	50	*130	25	60
57	296.0	288.18	*100	20	40	*120	20	50	*130	25	60
58	300.7	293.23	*100	20	43	*120	20	57	*130	25	64
59	305.7	298.28	*100	20	43	*120	20	57	*130	25	64
60	310.8	303.33	*100	20	43	*120	20	57	*130	25	64
62	321.4	313.43	*100	20	43	*120	20	57	*130	25	64
64	331.5	323.53	*100	20	43	*120	20	57	*130	25	67
65	336.5	328.58	*100	20	43	*120	20	57	*130	25	67
66	341.6	333.64	*100	20	43	*120	20	57	*130	25	67
68	351.7	343.74	*100	20	43	*120	20	57	*130	25	67
70	361.8	353.84	*100	20	43	*120	20	57	*130	25	67
72	371.9	363.94	*100	20	43	*120	20	57	*130	25	67
75	387.1	379.10	*100	20	43	*120	20	57	*130	25	67
76	392.1	384.15	*100	20	43	*120	20	57	*130	25	67
78	402.2	394.25	*100	20	43	*120	20	57	*130	25	67
80	412.3	404.36	*100	20	43	*130	20	57	*130	25	67
85	437.6	429.62	*100	20	50	*130	20	58	*130	25	67
90	462.8	454.88	*100	20	50	*130	20	58	*130	25	67
95	488.5	480.14	*100	20	50	*130	20	58	*130	25	67
100	513.4	505.40	*100	20	50	*130	20	58	*130	25	67
110	563.9	555.92	*100	20	50	*130	20	58	*130	25	67
114	584.1	576.13	*100	20	50	*130	20	58	*130	25	67
120	614.4	606.45	*100	20	50	*130	20	58	*130	25	67
125	639.7	631.51	*100	20	50	*130	20	58	*130	25	67

Notice: *welding hub

BASIC INFO.

Product name	DIN ISO Standard Sprocket for Roller Chain
Materials Available	1. Stainless Steel: SS304, SS316, etc
	2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
	3. OEM according to your request
Surface Treatment	Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic	Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion	ISO DIN ANSI & Customer Drawings
Size	Customer Drawings & ISO standard
Application	Industrial transmission equipment
Package	Wooden Case / Container and pallet, or made-to-order
Certificate	ISO9001: 2008
Advantage	Quality first, Service first, Competitive price, Fast delivery
Delivery Time	20 days for samples. 45 days for official order.

INSTALLATION AND USING

The chain spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references^[8]^[9]^[10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

Size	Pitch	Maximum Roller Diameter	Minimum Ultimate Tensile Strength	Measuring Load
ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
25	0.250 in (6.35 mm)	0.130 in (3.30 mm)	780 lb (350 kg)	18 lb (8.2 kg)
35	0.375 in (9.53 mm)	0.200 in (5.08 mm)	1,760 lb (800 kg)	18 lb (8.2 kg)
41	0.500 in (12.70 mm)	0.306 in (7.77 mm)	1,500 lb (680 kg)	18 lb (8.2 kg)
40	0.500 in (12.70 mm)	0.312 in (7.92 mm)	3,125 lb (1,417 kg)	31 lb (14 kg)
50	0.625 in (15.88 mm)	0.400 in (10.16 mm)	4,880 lb (2,210 kg)	49 lb (22 kg)
60	0.750 in (19.05 mm)	0.469 in (11.91 mm)	7,030 lb (3,190 kg)	70 lb (32 kg)
80	1.000 in (25.40 mm)	0.625 in (15.88 mm)	12,500 lb (5,700 kg)	125 lb (57 kg)
100	1.250 in (31.75 mm)	0.750 in (19.05 mm)	19,531 lb (8,859 kg)	195 lb (88 kg)
120	1.500 in (38.10 mm)	0.875 in (22.23 mm)	28,125 lb (12,757 kg)	281 lb (127 kg)
140	1.750 in (44.45 mm)	1.000 in (25.40 mm)	38,280 lb (17,360 kg)	383 lb (174 kg)
160	2.000 in (50.80 mm)	1.125 in (28.58 mm)	50,000 lb (23,000 kg)	500 lb (230 kg)
180	2.250 in (57.15 mm)	1.460 in (37.08 mm)	63,280 lb (28,700 kg)	633 lb (287 kg)
200	2.500 in (63.50 mm)	1.562 in (39.67 mm)	78,175 lb (35,460 kg)	781 lb (354 kg)
240	3.000 in (76.20 mm)	1.875 in (47.63 mm)	112,500 lb (51,000 kg)	1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches)	Pitch expressed in eighths	ANSI standard chain number	Width (inches)
¹⁄₄	²⁄₈	25	¹⁄₈
³⁄₈	³⁄₈	35	³⁄₁₆
¹⁄₂	⁴⁄₈	41	¹⁄₄
¹⁄₂	⁴⁄₈	40	⁵⁄₁₆
⁵⁄₈	⁵⁄₈	50	³⁄₈
³⁄₄	⁶⁄₈	60	¹⁄₂
1	⁸⁄₈	80	⁵⁄₈

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

WHY CHOOSE US

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard:	Standard, Nonstandard
Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Hardened Tooth Surface
Manufacturing Method:	Rolling Gear, Cut Gear
Toothed Portion Shape:	Spur Gear
Material:	1045, Stainless Steel

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

wheel sprocket

Compatibility of Chain Sprockets with Wheels

In general, chain sprockets are designed to work with specific types of wheels, and there are certain requirements for ensuring proper compatibility:

Chain Size and Pitch: The chain sprocket must match the size and pitch of the chain it is intended to work with. For example, if you have a roller chain with a pitch of 0.625 inches, you need a sprocket with the same pitch to ensure a proper fit.
Number of Teeth: The number of teeth on the sprocket should be compatible with the number of chain links. The chain should mesh smoothly with the sprocket without any binding or skipping.
Tooth Profile: The tooth profile of the sprocket should match the shape of the chain’s rollers to ensure smooth engagement and minimize wear.
Shaft Size: The center hole (bore) of the sprocket should match the diameter of the shaft it will be mounted on. Using the correct shaft size ensures a secure fit and prevents wobbling.
Hub Configuration: Some sprockets have hubs, which are extensions on either side of the sprocket. The hub’s length and configuration should match the requirements of the specific application.
Material and Strength: Consider the material and strength of the sprocket based on the application’s load and environmental conditions. Heavy-duty applications may require sprockets made of robust materials to withstand the forces and stresses.

It’s crucial to follow the manufacturer’s specifications and guidelines when selecting a chain sprocket for a particular wheel. Mixing incompatible sprockets and wheels can result in premature wear, inefficiencies, and potential safety hazards. If you are unsure about the compatibility, consult with the manufacturer or a knowledgeable expert to ensure you choose the right sprocket for your specific application.

wheel sprocket

Using wheel sprocket Assembly in Robotics and Automation

Yes, wheel sprocket assemblies are commonly used in robotics and automation systems to transmit power and facilitate movement. These systems offer several advantages for robotic applications:

Efficiency: wheel sprocket assemblies provide efficient power transmission, ensuring smooth and precise movement of robotic components.
Compact Design: The compact nature of sprockets and wheels allows for space-saving designs, making them ideal for robotic applications where space is limited.
Precision: Sprockets and wheels with accurate teeth profiles provide precise motion control, crucial for robotics and automation tasks that require high levels of accuracy.
Low Noise: Properly lubricated and maintained wheel sprocket systems generate minimal noise during operation, contributing to quieter robotic movements.
Customizability: wheel sprocket assemblies can be customized to suit specific robotic requirements, such as different gear ratios, sizes, and materials.
Multiple Configurations: Depending on the robotic application, different configurations like single or multiple sprockets, idler sprockets, or rack and pinion systems can be used.
High Load Capacity: Sprockets made from durable materials like steel can handle substantial loads, making them suitable for heavy-duty robotic tasks.

Examples of robotics and automation systems that commonly use wheel sprocket assemblies include:

Robotic Arms: wheel sprocket systems are utilized in robotic arms to control their movement and reach.
Automated Guided Vehicles (AGVs): AGVs use wheel sprocket assemblies for propulsion and steering, enabling them to navigate autonomously.
Conveyor Systems: In automated factories, conveyor belts are often driven by sprockets and wheels for efficient material handling.
Mobile Robots: Wheeled mobile robots use wheel sprocket assemblies to drive their wheels, enabling them to move in various directions.
Robot Grippers: wheel sprocket mechanisms can be integrated into robot grippers to facilitate gripping and handling objects.

The choice to use wheel sprocket assemblies in robotics and automation depends on the specific application requirements, load capacity, precision, and environmental conditions. By selecting the appropriate sprockets, wheels, and materials, engineers can ensure reliable and efficient robotic performance in a wide range of automated tasks.

wheel sprocket

Calculating Gear Ratio for a wheel sprocket Setup

In a wheel sprocket system, the gear ratio represents the relationship between the number of teeth on the sprocket and the number of teeth on the wheel. The gear ratio determines the speed and torque relationship between the two components. To calculate the gear ratio, use the following formula:

Gear Ratio = Number of Teeth on Sprocket ÷ Number of Teeth on Wheel

For example, if the sprocket has 20 teeth and the wheel has 60 teeth, the gear ratio would be:

Gear Ratio = 20 ÷ 60 = 1/3

The gear ratio can also be expressed as a decimal or percentage. In the above example, the gear ratio can be expressed as 0.3333 or 33.33%.

It’s important to note that the gear ratio affects the rotational speed and torque of the wheel sprocket. A gear ratio greater than 1 indicates that the sprocket’s speed is higher than the wheel’s speed, resulting in increased rotational speed and reduced torque at the wheel. Conversely, a gear ratio less than 1 indicates that the sprocket’s speed is lower than the wheel’s speed, resulting in decreased rotational speed and increased torque at the wheel.

The gear ratio is crucial in various applications where precise control of speed and torque is required, such as bicycles, automobiles, and industrial machinery.

China Custom Chains Wheel Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains China High-Intensity Chain Gear and High Wear Resistance Chain Sprocket
editor by CX 2024-02-11

China Standard Motorcycle Transmission Drive Conveyor Spare Parts 428 428h Roller Chains

Product Description

Welcome to visit Xihu (West Lake) Dis. CHINAMFG mechanical (chain )factory .
We produce a wide range power transmission products. Such as roller chains and leaf chains, conveyor chains, drive chains, agricultural chains .
Also we can supply all kinds of industrial sprockets, chain couplings.

Established in year of 2000. With over 20 years history of specializing in the roller chains producing. With stable and good quality. We now have gained customer’s high praise from at home and abroad.
Our manufacturing plant and workshop area is over 10000 square CHINAMFG and with staff is about 70. We are the middle scale factory in China.
Our chain quality can match with GB,DIN,ASA,ANSI,JIS standard.and have gain the ISO9001 Certificate.

Till now, except for the domestic market, we have exported many chains to USA, CANADA,COLOMBIA,BRAZIL,ARGENTINA,POLAND, ITALY,SPAIN AND SO ON.

1.Standards: ISO /DIN /ANSI/GB/JIS/ASA
2. Model: 06C-35-240, 04B-48B Simplex, Duplex, Triplex AND ACCORDING TO CUSTOMER’S REQUIREMENTS
3. Materials: Carbon steel 40Mn,# 10 FOR THE ROLLER AND BUSH,40CR FOR THE PIN
4. All spare parts of chains are heat treated(quenching and tempering) and controlled in a reasonable tolerance range and suitable for the industry standard.
5. Tensile strength: more higher than the standard about 15%
6. Certificate of Quality: ISO 9001
7. Good lubrication with excellent grease.
8. Color: Self color and shot peen.
9.Can match with sprockets freely

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard:	Standard
Application:	Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car
Surface Treatment:	Polishing
Structure:	Roller Chain
Material:	Carbon Steel
Type:	Short Pitch Chain

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

drive chain

Can a drive chain be used in a packaging or bottling application?

Yes, a drive chain can be used in packaging or bottling applications where reliable and efficient power transmission is required. Here is a detailed explanation:

In packaging and bottling processes, various types of equipment are utilized, such as conveyor systems, fillers, cappers, labelers, and palletizers. Drive chains offer several advantages in these applications:

Accurate Power Transmission: Drive chains provide precise power transmission, ensuring the synchronized movement and precise positioning of the packaging and bottling equipment. This allows for reliable and efficient production processes, smooth material flow, and precise control over the packaging operations.
High Load Capacity: Drive chains are designed to handle heavy loads and transmit power in packaging and bottling equipment. They can effectively transmit power to drive mechanisms involved in conveyor systems, rotary tables, or indexing units, allowing for efficient movement and handling of packaged goods or bottles.
Robustness and Durability: Packaging and bottling environments can be demanding, with high production rates, repetitive movements, and exposure to moisture, dust, or other contaminants. Drive chains are designed to withstand these conditions, providing durability, resistance to wear, and long service life even in high-demand applications.
Flexibility and Adaptability: Drive chains offer flexibility and adaptability in designing and configuring packaging and bottling equipment. They can be easily integrated into different types of conveyors, indexing systems, or rotary machines, allowing for efficient material handling, product orientation, and packaging customization.
High-Speed Capability: Drive chains can accommodate high-speed operation in packaging and bottling applications. They are designed to provide reliable power transmission even at high rotational speeds, ensuring efficient production rates and meeting the demands of fast-paced packaging lines.
Cost-Effectiveness: Drive chains offer a cost-effective solution for power transmission in packaging and bottling applications. They have a long service life, reduced maintenance requirements, and lower replacement costs compared to some alternative power transmission systems.

It is important to consider the specific requirements of the packaging or bottling application when selecting a drive chain. Factors such as load capacity, speed, environmental conditions, and maintenance considerations should be taken into account.

Regular maintenance, including inspection, lubrication, and tension adjustment, is crucial to ensure optimal performance and longevity of the drive chain in packaging and bottling applications.

By utilizing drive chains in packaging and bottling processes, operators can benefit from accurate power transmission, high load capacity, durability, flexibility, high-speed capability, and cost-effectiveness, contributing to efficient and reliable packaging operations.

drive chain

Can a drive chain be used in a food processing or packaging application?

Yes, a drive chain can be used in food processing and packaging applications, provided that certain considerations are taken into account. Here is a detailed explanation:

In food processing and packaging applications, where hygiene, cleanliness, and compliance with food safety regulations are crucial, drive chains offer several benefits:

Reliable Power Transmission: Drive chains provide efficient and reliable power transmission, making them suitable for various applications in food processing and packaging machinery, such as conveyors, mixers, filling machines, and labeling equipment.
Corrosion Resistance: To ensure compliance with hygiene standards, it is essential to select drive chains made from materials that are resistant to corrosion, such as stainless steel or food-grade plastic. These materials can withstand frequent cleaning, exposure to water, and the corrosive effects of certain food products or cleaning agents.
Easy Cleaning and Maintenance: Drive chains designed for food applications often feature smooth surfaces and easy-to-clean designs, minimizing the risk of food buildup or contamination. They can be cleaned using standard cleaning methods and equipment, allowing for efficient sanitation and reducing the chances of foodborne contamination.
Compliance with Food Safety Regulations: When using drive chains in food processing or packaging applications, it is essential to ensure compliance with food safety regulations, such as FDA (Food and Drug Administration) guidelines or other relevant standards specific to the industry or region. This includes selecting materials that are approved for food contact and implementing proper cleaning and maintenance procedures.
Product Handling: Drive chains can handle various types of food products, including dry goods, packaged items, or even delicate food items, depending on the specific chain design and application requirements. Specialized chains with attachments or gripper systems can be used to securely transport and manipulate food products during processing or packaging.

It is important to work with reputable chain manufacturers or suppliers who offer drive chains specifically designed for food processing and packaging applications. They can provide guidance on chain selection, material compatibility, compliance with food safety regulations, and maintenance practices.

By considering these factors and implementing proper chain selection, installation, cleaning, and maintenance procedures, drive chains can be safely and effectively utilized in food processing and packaging applications while ensuring product quality, hygiene, and compliance with food safety standards.

drive chain

How does the wear life of a drive chain compare to other power transmission systems?

The wear life of a drive chain can vary depending on factors such as the application, operating conditions, maintenance practices, and the quality of the chain itself. Here’s an explanation:

The wear life of a drive chain is influenced by several factors:

1. Load and Stress: The load capacity and stress placed on the drive chain affect its wear life. Higher loads and stress levels can lead to accelerated wear and reduced lifespan.
2. Lubrication and Maintenance: Proper lubrication and maintenance practices significantly impact the wear life of a drive chain. Regular lubrication, tension adjustment, and inspection help minimize wear and extend the chain’s lifespan.
3. Operating Conditions: Environmental factors such as temperature, humidity, dust, and exposure to contaminants can influence the wear life of a drive chain. Harsh operating conditions may accelerate wear and reduce the chain’s lifespan.
4. Chain Quality: The quality and construction of the drive chain play a vital role in its wear life. Chains made from high-quality materials and manufactured to precise specifications tend to have longer wear life compared to lower-quality chains.

When comparing the wear life of a drive chain to other power transmission systems, such as belts or gears, it is important to consider the specific application and operating conditions. In some cases, drive chains may offer longer wear life compared to belts, especially in heavy-load or high-torque applications. However, the wear life of gears can often surpass that of drive chains, particularly in applications with high-speed and high-load requirements.

It is essential to consult manufacturer specifications, consider the specific requirements of the application, and evaluate the wear life of different power transmission systems to determine the most suitable option for a given application.

China Standard Motorcycle Transmission Drive Conveyor Spare Parts 428 428h Roller Chains
editor by CX 2024-01-02

China high quality B Series of Short Pitch Precision Drive Conveyor Transmission Roller Chains Double Row 10b-2

Product Description

Till now, except for the domestic market, we have exported many chains to USA, CANADA,COLOMBIA,BRAZIL,ARGENTINA,POLAND, ITALY,SPAIN AND SO ON.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard:	Standard
Application:	Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car
Surface Treatment:	Oxygenation
Structure:	Roller Chain
Material:	Carbon Steel
Type:	Short Pitch Chain

Samples:	US$ 0/Meter 1 Meter(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

drive chain

What are the benefits of using a maintenance-free drive chain?

Using a maintenance-free drive chain offers several advantages in applications where minimal maintenance and high reliability are desired. Here is a detailed explanation:

A maintenance-free drive chain, also known as a self-lubricating chain, is designed to operate without the need for regular lubrication or maintenance. The benefits of using such a chain include:

Reduced Downtime: Maintenance-free drive chains eliminate the need for regular lubrication and associated maintenance tasks. This saves time and reduces the frequency of equipment shutdowns for lubrication and maintenance, resulting in increased productivity and reduced downtime.
Lower Maintenance Costs: Maintenance-free chains require less maintenance, which leads to cost savings. There is no need for purchasing lubricants, scheduling routine maintenance, or performing frequent lubrication tasks. This can result in significant cost savings over the life of the chain.
Increased Reliability: Maintenance-free chains are designed to provide reliable and consistent performance over extended periods without the need for lubrication. They are constructed using self-lubricating materials or have built-in lubrication systems, ensuring optimal chain operation and minimizing the risk of chain failure due to inadequate lubrication.
Extended Service Life: Maintenance-free chains are often engineered with materials that exhibit excellent wear resistance and self-lubricating properties. This extends the chain’s service life by reducing wear, elongation, and the need for frequent replacements. The chains maintain their performance characteristics even in demanding environments.
Cleaner Operation: Maintenance-free chains do not require external lubrication, which eliminates the risk of lubricant splatter or contamination. This is particularly beneficial in applications where cleanliness is essential, such as food processing, pharmaceuticals, or cleanroom environments. The absence of lubrication also reduces the attraction of dust or debris, contributing to cleaner and more reliable operation.
Environmentally Friendly: Maintenance-free chains can contribute to environmental sustainability. The elimination of routine lubrication reduces the consumption of lubricants and minimizes the release of lubricants into the environment. This aligns with eco-friendly practices and reduces the overall environmental impact of the equipment.
Application Versatility: Maintenance-free chains can be used in various industries and applications where minimal maintenance is desired or where lubrication is challenging or not feasible. They find applications in industries such as food processing, packaging, automation, automotive, and many others.

It is important to note that while maintenance-free chains offer many benefits, they still require regular inspection and occasional cleaning to ensure optimal performance and detect any abnormal wear or damage.

When selecting a maintenance-free chain, it is crucial to consider factors such as load capacity, speed, environmental conditions, and compatibility with the specific application requirements.

By utilizing maintenance-free drive chains, operators can benefit from reduced downtime, lower maintenance costs, increased reliability, extended service life, cleaner operation, environmental friendliness, and application versatility.

drive chain

Can a drive chain be used in a hydraulic or pneumatic system?

A drive chain is not typically used as a primary power transmission method in hydraulic or pneumatic systems. Hydraulic and pneumatic systems rely on fluid power to transmit force and motion. However, drive chains can still be used in certain auxiliary or secondary applications within these systems. Here is a detailed explanation:

In hydraulic or pneumatic systems, the primary power transmission is achieved through the use of hydraulic fluid or compressed air. The fluid or air is pressurized and controlled to generate force and motion in actuators or motors. Drive chains, on the other hand, are commonly used in mechanical power transmission applications where direct force is required, such as in mechanical drives or conveyors.

While drive chains may not be used as the main power transmission method, they can be employed in auxiliary or secondary applications within hydraulic or pneumatic systems, including:

Tensioning and Positioning: Drive chains can be used to tension belts or other components in a system that is driven by hydraulic or pneumatic power. They can provide accurate positioning and tension control in certain applications.
Linkage Mechanisms: Drive chains can be utilized as part of mechanical linkage mechanisms in hydraulic or pneumatic systems to transmit motion or force between different components.
Drive Chain Actuators: In some cases, specialized drive chain actuators can be used in combination with hydraulic or pneumatic power to provide linear or rotary motion for specific applications.
Accessories and Ancillary Devices: Drive chains can be employed in various accessories or ancillary devices within hydraulic or pneumatic systems, such as tensioners, clutches, or braking mechanisms.

It is important to note that the selection and application of drive chains in hydraulic or pneumatic systems require careful consideration of the specific requirements, load conditions, and compatibility with the fluid power components. Consulting with experts or manufacturers is recommended to ensure the proper integration and performance of the drive chain in such applications.

China high quality B Series of Short Pitch Precision Drive Conveyor Transmission Roller Chains Double Row 10b-2
editor by CX 2024-01-02

China Good quality Drive Conveyor Transmission Chain B Series Short Pitch Precision Single Roller Chains

Product Description

Professionally manufacture all good quality chains.Products are made of high quality alloy steel production. The plates are punched and squeezed bores by precision technology. roller chian are machined by high-efficiency automatic equipment and automatic grinding equipment, then through heat treatment of carburization, carbon and nitrogen protection mesh belt furnace, surface blasting process etc. Assembled precision by Internal hole position, spin riveted by pressure to ensure the performance of the entire chain

Till now, except for the domestic market, we have exported many chains to USA, CANADA,COLOMBIA,BRAZIL,ARGENTINA,POLAND, ITALY,SPAIN AND SO ON.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard:	Standard
Application:	Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car
Surface Treatment:	Polishing
Structure:	Roller Chain
Material:	Carbon Steel
Type:	Short Pitch Chain

Samples:	US$ 0/Meter 1 Meter(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

drive chain

How does the alignment of sprockets affect the performance of a drive chain?

The alignment of sprockets is critical for ensuring the optimal performance and longevity of a drive chain. Here is a detailed explanation:

The alignment of sprockets directly affects the following aspects of a drive chain’s performance:

Smooth Power Transmission: Proper alignment of sprockets ensures the smooth engagement and disengagement of the chain with the sprocket teeth. When the sprockets are aligned correctly, the chain articulates smoothly, minimizing friction, wear, and noise. This promotes efficient power transmission and prevents premature chain failure.
Reduced Wear and Elongation: Misaligned sprockets can cause uneven loading on the chain, leading to accelerated wear and elongation. When the sprockets are aligned, the chain experiences equal forces on all links, resulting in more uniform wear distribution and reducing the risk of chain elongation. Proper alignment helps maintain the chain’s pitch and overall length, ensuring consistent power transmission and extending the chain’s service life.
Minimized Side Loads: Misaligned sprockets can create side loads on the chain, causing it to run at an angle or contact the side plates excessively. This leads to increased friction, wear, and stress on the chain components. Proper alignment reduces these side loads, allowing the chain to run smoothly and minimizing unnecessary wear and stress on the chain’s components.
Prevention of Chain Skipping or Jumping: Misaligned sprockets can cause the chain to skip or jump teeth, resulting in loss of power transmission, erratic operation, and potential damage to the chain and sprockets. Proper alignment ensures that the chain remains engaged with the sprocket teeth, preventing any skipping or jumping and ensuring reliable power transmission.
Optimal Tension Distribution: Properly aligned sprockets contribute to the even distribution of chain tension. When the sprockets are aligned, the tension is evenly distributed along the chain, reducing the risk of localized stress points and chain elongation. This helps maintain consistent tension, improves power transmission efficiency, and extends the life of the chain and sprockets.

To achieve proper sprocket alignment, it is important to ensure that the sprockets are mounted securely, aligned parallel to each other, and positioned at the correct distance apart. Additionally, the sprockets should have the appropriate tooth profile and pitch diameter to match the chain’s specifications.

Regular inspection and maintenance are essential to verify and maintain sprocket alignment. This includes checking for signs of wear, damage, or misalignment, as well as periodically adjusting the tension and lubricating the chain as needed.

By ensuring the proper alignment of sprockets, operators can achieve smooth power transmission, reduced wear, minimized side loads, prevention of chain skipping, and optimal tension distribution. This ultimately improves the performance, efficiency, and reliability of the drive chain system.

drive chain

How does the cost of a drive chain compare to other power transmission systems?

The cost of a drive chain can vary depending on various factors such as the type of chain, material, size, and quality. Here is a detailed explanation of how the cost of a drive chain compares to other power transmission systems:

Initial Cost: In general, drive chains tend to have a lower initial cost compared to some other power transmission systems such as gear drives or belt drives. This is especially true for standard roller chains that are widely available and commonly used.
Installation and Maintenance Cost: The installation and maintenance cost of a drive chain is usually reasonable. Chains are relatively easy to install and maintain, requiring routine inspections, lubrication, and occasional adjustments. This simplicity can contribute to overall cost-effectiveness.
Longevity and Durability: Drive chains are known for their durability and long service life when properly maintained. Although they may require periodic replacement due to wear, the extended lifespan of a drive chain can provide cost savings over time compared to systems that require more frequent replacement or repair.
Application-Specific Costs: In some specialized applications, such as high-performance or heavy-duty applications, the cost of drive chains can be higher. This is often due to the use of specialized chains with specific features, materials, or coatings that enhance performance and durability in demanding environments.
Overall Cost-Effectiveness: Considering the initial cost, maintenance, and longevity, drive chains are generally considered cost-effective compared to other power transmission systems. Their reliability, efficiency, and suitability for a wide range of applications contribute to their value proposition.

It’s important to note that the cost comparison between drive chains and other power transmission systems may vary depending on specific application requirements, environmental factors, and the desired performance characteristics. It is recommended to consider the specific needs of the application and consult with experts or suppliers to determine the most cost-effective solution.

China Good quality Drive Conveyor Transmission Chain B Series Short Pitch Precision Single Roller Chains
editor by CX 2023-12-22

China wholesaler CZPT Brand Wholesale Price China Industry Carbon Steel Stainless Plastic Conveyor Transmission 12b-1 12b-2 12b-3 Roller Chains with Sprocket for Machinery

Product Description

Product Description

Specification

Product Name	Wholesale Price Conveyor Chain 12b-2 Roller Chains with Sprocket For Machinery
Type	Roller Chain
MOQ	1meter
Brand	CSZBTR
OEM	YES,We also can produce special chain according to your requirements,also produce matched sprocket/wheel.
Package	According to customer’s requirements
Weight	0.56kg/Meter
Delivery time	7 days

other models

Chain No.	P	h2	H	$	T
08AF29	12.700	10^)0	15.6	–	1.50
O8BF9O	12.700	10^0	17.0	0.3	1.60
0M-1STCF15	12.700	1571	17.0		1.60
10AF2	15.875	13.00	17.0	0.3	2.(0
10AF15	15.875	15.09	17.0	–	2.03
10AF23	15.875	13.00	2(18	0.3	2.03
10AF48	15«5	1100	16.9	«	2.03
10BF50	15B75	13.70	17.0	0.3	1.70
10AF5«	15^75	1SX)9	17.0	.	2.03

	P	h2	h	1	S	a
Chain No.
08BF25	12.7XJ	10.6	15.6	1.60		30,
08BF29	12. TO	1&6	14.5	1.60	as	30*
08BF30	12	1G6	14.5	l.g	Q3	30*
08BF35	12. W	ia6	21.5	1.60	0.6	30*
08BF67	12.TO	ia6	16.1	1.60	as	30*
0fflF195	12.70	10.6	45	1.60	0.4	30,
08AF10	12.70	10.6		L50	–	30*
12B-1STCF1	19.05	15.0	19.0	1.85	–	30,
12AF33	19.05	15.6	19.7	2.42	0£	18*

	P	hl	h2	h	A	Q
Chain No.
08BF21	12.7	10	1Q6	15.0	10	0

Company Profile
HangZhou Terry Machinery Co.Ltd is a leading supplier of bearings, Linear motion system for CNC , Ball transfer
Unit and transmission component .the growing industrial and Favorable policy of HangZhou benefit the developm
ent of Terry Machinery .Our products are utilized in industrial, motorcycle, vehicle and Automation applications.
Now we are exporting to 46 countries. including USA, GBR , Germany , Spain, Poland ,Turkey ect .The Goal o
f Terry Machinery to provide out customers with widest range of products at competitive prices, backed with the
best Service.OUR ADVANTAGE Products Our major products & Supplied:Meet all the international standards
and ISO9001 -TS1694 Certificate Big volume in Stock, No MOQ required Personnel Our salespersons are well
trained to accommodate your requests and speak English for your conveniences.Our technicians and engineers
Experience in the Industry area exceeds 23 years Service &Quality control ,We supply detailed drawings and
offer when ever necessary,We help all customers promote and improve their sales.We inspect every piece of
products by ourselves before delivery.

Application
related product
product-list-1.html
Packing &Delivery
Customer Praise
FAQ

Standard Or Nonstandard:	Standard
Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Hardened Tooth Surface
Manufacturing Method:	Rolling Gear
Toothed Portion Shape:	Spur Gear
Material:	45mn

Samples:	US$ 5.84/Piece 1 Piece(Min.Order) \| Request Sample

transmission chain

How does the weight of a transmission chain impact its installation and operation?

The weight of a transmission chain plays a significant role in its installation and operation. Here’s a detailed answer to the question:

1. Installation Process: The weight of a transmission chain can affect the ease and complexity of the installation process. Heavier chains may require additional manpower or equipment to lift and position them accurately. Installers need to consider the weight of the chain during handling and ensure proper safety measures are in place to prevent injuries or accidents.

2. System Design: The weight of the chain is a crucial factor in the overall design of the transmission system. It influences the selection of other components such as sprockets, bearings, and shafts. The system needs to be designed to handle the weight of the chain and transmit power effectively without excessive strain or wear.

3. Power Transmission Efficiency: The weight of the chain affects the overall mass of the system. Excessive weight can increase inertia and result in higher energy requirements for acceleration and deceleration. This can impact the efficiency of power transmission and result in increased energy consumption. It is important to strike a balance between chain weight and system performance to optimize energy efficiency.

4. Load Capacity: The weight of the chain is directly related to its load-carrying capacity. Heavier chains are typically designed to handle higher loads and transmit greater amounts of power. It is essential to choose a chain with an appropriate weight and load capacity that matches the requirements of the application to ensure safe and reliable operation.

5. Wear and Fatigue: The weight of the chain can contribute to wear and fatigue over time. Excessive weight or overloading can accelerate the wear process, leading to premature failure of the chain. Proper maintenance, lubrication, and regular inspection are necessary to mitigate the effects of wear and ensure the longevity of the chain.

6. Noise and Vibration: The weight of the chain can influence the noise and vibration levels during operation. Heavier chains may generate more noise and vibration, especially at higher speeds. Proper tensioning, alignment, and lubrication help minimize these effects and maintain smooth and quiet operation.

When considering the weight of a transmission chain, it is essential to balance factors such as installation requirements, system design, power transmission efficiency, load capacity, wear and fatigue, and noise and vibration levels. Selecting the right chain weight for the specific application ensures optimal performance, longevity, and overall system reliability.

transmission chain

How does the alignment of sprockets affect the lifespan of a transmission chain?

The alignment of sprockets plays a crucial role in the lifespan and performance of a transmission chain. Here’s a detailed answer to the question:

1. Proper Load Distribution: When the sprockets are aligned correctly, the transmission chain is able to evenly distribute the load along its length. This ensures that the chain experiences uniform stress and minimizes the concentration of forces on specific chain links. Improper alignment can result in uneven load distribution, leading to accelerated wear and fatigue of the chain.

2. Reduced Friction and Wear: Proper alignment helps maintain the correct engagement between the chain and the sprockets. When the chain engages smoothly with the sprockets, friction and wear are minimized. On the other hand, misaligned sprockets can cause the chain to rub against the teeth or sides of the sprockets, leading to increased friction, wear, and potential chain failure.

3. Chain Tension: Sprocket alignment also affects the tension of the transmission chain. Proper alignment ensures that the chain remains properly tensioned throughout its operation. Excessive tension due to misalignment can lead to increased stress on the chain, resulting in accelerated wear, fatigue, and potential chain breakage. Insufficient tension can cause the chain to skip or disengage from the sprockets.

4. Smooth and Efficient Operation: When the sprockets are aligned correctly, the transmission chain experiences smooth and efficient operation. This allows for smooth power transfer, reduced vibration, and noise levels, and improved overall system performance. Misaligned sprockets can cause the chain to bind, jump, or produce excessive noise, leading to decreased efficiency and potential damage to the chain and sprockets.

5. Extended Chain Life: Proper sprocket alignment helps to extend the lifespan of the transmission chain. By ensuring that the chain operates within its design parameters and experiences minimal stress and wear, the risk of premature failure is reduced. This leads to longer chain life, reduced maintenance requirements, and lower overall operating costs.

It’s important to regularly inspect and maintain the alignment of sprockets in a transmission chain system. Proper installation, periodic alignment checks, and adjustment when necessary are essential for maximizing the lifespan and performance of the transmission chain.

transmission chain

How does the load capacity of a transmission chain affect its performance?

The load capacity of a transmission chain plays a crucial role in determining its performance and reliability in various applications. Here’s a detailed explanation:

The load capacity refers to the maximum amount of force or weight that a transmission chain can withstand without experiencing premature wear, deformation, or failure. It is typically specified by the manufacturer and depends on several factors, including the chain’s design, material, construction, and operating conditions.

When the load on a transmission chain exceeds its capacity, several performance issues may arise:

Increased Wear: Excessive loads can cause accelerated wear on the chain’s components, such as the pins, bushings, and rollers. This can lead to elongation, increased friction, and potential chain failure.
Reduced Efficiency: Overloading the chain can result in higher frictional losses, reducing the efficiency of power transmission. This can lead to energy wastage and decreased overall system performance.
Potential Chain Breakage: If the load exceeds the chain’s capacity by a significant margin, it can cause the chain to break, resulting in machine downtime and potential safety hazards.
Increased Stress on Other Components: An overloaded transmission chain puts additional stress on other connected components, such as sprockets, bearings, and shafts. This can lead to premature wear and failure of these components as well.

Choosing a transmission chain with an appropriate load capacity is crucial for ensuring optimal performance and longevity. It is important to consider factors such as the expected load magnitude, variations in load during operation, and safety factors to select a chain that can safely and reliably handle the intended application.

Manufacturers provide load capacity charts and guidelines based on extensive testing and engineering analysis. It is advisable to consult these resources and work closely with the manufacturer or a qualified engineer to determine the most suitable transmission chain for your specific load requirements.

China wholesaler CZPT Brand Wholesale Price China Industry Carbon Steel Stainless Plastic Conveyor Transmission 12b-1 12b-2 12b-3 Roller Chains with Sprocket for Machinery
editor by CX 2023-11-16

China factory Transmission Chain Conveyor Drive Metric ANSI DIN Standard Pitch Industrial Heavy Duty Stainless Steel Cast Roller Chains

Product Description

Model NO.	06C/08A/10A/12A/16A/20A/24A/28A/32A/40A/06B/08B/10B/12B/16B/20B/24B/28B/32B/40B-1/2/3 Heavy duty
Chain Model	Roller Chains
Structure (for Chain)	Roller Chain
Specification	GB/T, DIN, ANSI, ISO, BS, JIS.
Origin	HangZhou, ZheJiang
Color	Solid Color
Chain Color	Customized

Our company

Wolff Chain Co. is 1 of the professional chain manufacturers in China. We focus on reseaching, manufacturing and trading of the chain drive with famous brands — “DOVON” and “DECHO”. We supply OEM services for many famous enterprises such as SUZUKI, XIHU (WEST LAKE) DIS., FAW, AGCO, JUMING as well.

Wolff mainly producing the Transmission chains,Conveyor chains,Dragging Chains,Silent chains,Leaf chains,Roller chains,Special chain and many other series of chain products. Our technicians a have improved the chains quality to the world-level. High quality material selection, powerful and precise heat-treatment technology and excellent assembly methods ensure Wolff chains meet the tough and strict requirements for machines and vehicles.

All of our products completely conform to the international standard such as ISO\DIN\ANSI\BS\JIS, etc. Wolff has been successfully certified by ISO9001 Quality Management System,SGS inspection and BV inspection. Wolff chains can be widely applied to many industries including automobile, motorcycle, forklift, wood processing machine, constructure machine, packing machine, food machine,tobacco machine and agricultural equipments. Wolff chains are popular in America,South America,Europe,Middle East, South East Asia and Africa markets.

Our workshop

Our certification

Welcome to our exhibition

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in single color box. If you have special request about packing, pls negotiate with us in advance, we can pack the goods as your request.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages
before you pay the balance. Other payments terms, pls negotiate with us in advance, we can discuss.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.We welcome sample order.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

Standard or Nonstandard:	Standard
Application:	Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Marine, Mining Equipment
Surface Treatment:	Oil Blooming
Structure:	Roller Chain
Material:	Carbon Steel
Type:	Short Pitch Chain

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

drive chain

Can a drive chain be used in a HVAC or ventilation system?

Yes, a drive chain can be used in HVAC (Heating, Ventilation, and Air Conditioning) or ventilation systems where reliable and efficient power transmission is required. Here is a detailed explanation:

HVAC and ventilation systems utilize various components such as fans, blowers, dampers, and louvers to control air flow, temperature, and humidity in residential, commercial, and industrial buildings. Drive chains offer several advantages in these applications:

Reliable Power Transmission: Drive chains provide reliable power transmission for HVAC and ventilation systems. They are capable of transmitting power over long distances, accommodating various speeds and torque requirements, and operating in different directions of rotation.
Flexible System Design: Drive chains offer flexibility in system design and layout. They can be easily configured to connect and drive multiple components, such as fans, motors, and dampers, allowing for efficient control and adjustment of air flow and system performance.
Accurate Speed Control: Drive chains allow for precise speed control in HVAC systems. By using sprockets of different sizes or incorporating variable speed drives, the rotational speed of fans or blowers can be adjusted to achieve the desired air flow rates and maintain optimal environmental conditions.
High Load Capacity: HVAC and ventilation systems often require components to handle significant air volumes and pressure differentials. Drive chains are designed to handle high loads and transmit power effectively, ensuring reliable operation of fans, blowers, and other equipment.
Durability and Longevity: Drive chains are engineered to withstand the demanding conditions of HVAC and ventilation systems. They are designed to resist wear, corrosion, and fatigue, ensuring durability and long service life even in continuous or high-cycle operations.
Quiet Operation: Drive chains, when properly lubricated and maintained, can operate quietly in HVAC systems, minimizing noise and vibration levels. This is crucial for maintaining a comfortable and noise-free environment in residential, commercial, or institutional settings.

When selecting a drive chain for HVAC or ventilation applications, factors such as load capacity, speed requirements, environmental conditions (such as temperature and humidity), and maintenance considerations should be taken into account.

Regular inspection, lubrication, and tension adjustment are important for ensuring the optimal performance and longevity of the drive chain in HVAC and ventilation systems.

By utilizing drive chains in HVAC and ventilation systems, operators can benefit from reliable power transmission, flexible system design, accurate speed control, high load capacity, durability, longevity, and quiet operation, contributing to efficient and effective air conditioning and ventilation in various building environments.

drive chain

How does the elongation of a drive chain affect its performance?

The elongation of a drive chain can have a significant impact on its performance and overall operation. Here is a detailed explanation:

Drive chains are subject to wear and elongation over time due to factors such as load, speed, tension, lubrication, and maintenance. Elongation refers to the increase in the chain’s pitch length, which can lead to several performance-related issues:

Loss of Tension: As a chain elongates, it loses tension and becomes slack. This results in a loss of power transmission efficiency and can lead to skipping or jumping of the chain on the sprockets. A slack chain may also cause a loss of accuracy and synchronization in driven systems.
Poor Performance: Elongation can affect the overall performance of the drive system. It can lead to increased backlash, reduced precision, and the potential for chain derailment or disengagement from the sprockets. These issues can result in decreased efficiency, unreliable operation, and increased risk of damage to the chain or other components.
Increased Wear: Elongation causes increased wear between the chain links, pins, and bushings. This wear can accelerate the elongation process and further decrease the chain’s performance and service life. It can also lead to increased friction, heat generation, and the potential for chain failure if not addressed promptly.
Reduced Load-Carrying Capacity: Elongation reduces the effective pitch length of the chain, resulting in a decreased load-carrying capacity. This can limit the chain’s ability to handle heavy loads, potentially leading to premature failure or inadequate performance in applications where high loads are involved.
Increased Noise and Vibration: Elongation can cause increased noise and vibration during chain operation. The slack chain may produce rattling or banging sounds, and the vibration can negatively affect the overall system performance and operator comfort.

Regular inspection and maintenance are essential to monitor chain elongation and address it promptly. Measuring elongation using specialized tools and following the manufacturer’s recommended elongation limits can help determine when a chain requires replacement or adjustment.

Proper chain tension, lubrication, and regular maintenance practices, including periodic tension adjustment and lubrication replenishment, can help minimize elongation and ensure optimal chain performance. It is important to follow the manufacturer’s guidelines and consult with experts or technicians to establish appropriate maintenance schedules and procedures for the specific drive chain and application.

drive chain

What are the signs of a worn-out drive chain?

A worn-out drive chain can significantly impact the performance and safety of a machine or system. It is important to recognize the signs of a worn-out drive chain to address the issue promptly. Here are some common signs to look out for:

1. Chain Elongation: Excessive chain elongation is a clear indication of wear. You can measure chain elongation by comparing the current chain length to its original length. If the chain has elongated beyond the manufacturer’s recommended limit, it is a sign of wear and requires replacement.
2. Visible Signs of Wear: Inspect the drive chain for visible signs of wear, such as worn-out or distorted chain links, rollers, or plates. Look for signs of corrosion, pitting, or discoloration, indicating the chain’s deterioration.
3. Chain Slack: Excessive chain slack, where the chain visibly sags or has too much play, is an indicator of wear. A properly tensioned chain should have a minimal amount of slack, and excessive slack suggests elongation and a need for replacement.
4. Noise and Vibration: A worn-out drive chain often produces increased noise and vibration during operation. If you notice unusual rattling, clanking, or grinding sounds, or if you feel excessive vibrations, it may be a sign of a worn chain.
5. Poor Power Transmission: A worn-out chain may struggle to efficiently transfer power, resulting in reduced performance and power loss. You may experience a decrease in acceleration, sluggishness, or difficulty maintaining consistent speed.
6. Poor Gear Shifting: In applications where the drive chain is connected to gears, a worn chain can cause difficulties in gear shifting, resulting in jerky or unreliable gear changes.
7. Increased Chain Tension: As a chain wears, it may require frequent tension adjustments to maintain proper alignment and operation. If you find yourself frequently adjusting the chain tension, it may be a sign of wear.

If you observe any of these signs, it is recommended to replace the worn-out drive chain promptly to avoid further damage and ensure the safe and efficient operation of the machinery.

China factory Transmission Chain Conveyor Drive Metric ANSI DIN Standard Pitch Industrial Heavy Duty Stainless Steel Cast Roller Chains
editor by CX 2023-11-03

China supplier Direct Manufacturer Supply Conveyor Chains Sprocket Roller Chain Sprocket Wheel with Heat Treatment sprocket bar

Product Description

Sprocket:

1. Material: C45 & Cast Iron 304 stainless steel
2. Supply standard and non standard sprockets according to European and American Standard & Drawing
3. Superior quality & Competitive price & Prompt delivery

Product Attribute

Product name	Sprocket
Surface Treatment	Annealing, natural anodization, heat treatment, polishing, nickel plating, chrome plating, znic plating,Black surface painted etc.
Products Available	Transmission machinery such as mining machinery, agricultural machinery, engineering machinery, forestry machinery, petrochemical industry, automatic assembly lines, etc
material	carbon steel,stainless steel, alloy steel
Certificate	ISO,SGS,DIN,JIS
product type	European Standard American Standard
Port	Any sea port or airport in China
Brand	TV OEM
Payment	L/C, T/T, D/P, Western Union
Package	Chain, Plastic Bag, Color Box, Wooden Case. or OEM
European standard	03A-1 04A-1 05A-1-2 06A-1-2-3 081A-1 083A-1/084A-1 085A-1 086A-1 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3 28A-1-2-3 32A-1-2-3
European standard	03B-1 04B-1 05B-1-2 06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3 28B-1-2-3 32B-1-2-3
American standard	25,35,41,40,50,60,80,100,120,140,160,180,200,240 35-2,40-2,50-2,60-2,80-2,100-2,120-2,140-2,160-2,200-2 35-3 ,40-3 ,50-3 ,60-3 ,80-3, 100-3,120-3
We also carry out OEM according to your requirements

Detailed Photos

Product Parameters

Our Advantages

Company advantages:
Own Import & Export License, The TV trade mark registered successfully in many countries, Sales network spread all over China, Products export to 65 countries in 5 continents.

Membership:
1. The member of China General Machine Components Industry Association.
2. The member of China Chain Transmission Association.
3. The member of China Chain Standardization Association.
4. The member of China Agricultural Association Machinery Manufacturers.

With our excellent trained staffs and workers, advanced and efficient equipments, completely sales network, strict QA systems. You are confidence that our premium qualified chain can meet all customers’ specification and strictest quality standards.

Factory Display

WHY CHOOSE US

Comprehensive Product Portfolio We produce and supply a wide range of power transmission
products including drive chains, leaf chains, conveyor chains, agricultural chains, sprockets, and
couplings. This one-store-for-all shopping experience will significantly reduce your searching costs while
guarantee youfind what you want at 1 click.

Value Choice Products Our products are the best combination of quality and price, and you get what
you want within your budgets

Seasoned Sales Associates and Engineers We have 15 seasoned sales associates and 5 engineers;
on our team at your disposal any time when you need a helping hand. They are well trained with industry
know-now and will always respond to your requests within 24 hours.

100% Customer Retention Rate Our regular customers from overseas come back not just for our
premium quality products, but for the superior services that we’ve provided over the years.

FAQ

Q1: What’s your average lead time?
A: It varies. Our regular end-to-end lead time is 1-2 months.. We also provide express shipments for rush orders. For details,please consult our sales associate.

Q2: Is your price better than your competitors given the same quality?
A: Definitely YES. We provide the most competitive price in the power transmission industry. If price disparity exists, we’ll be more than happy to do a price match.
Q3: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.

Q4: Can we inspect the goods before shipment?
A: Yes. You or your representative or any third-party inspection party assigned is allowed access to our facility and do the inspection.

Q5: What kind of payment method is acceptable for your mill?
A: We’re flexible. We take T/T, L/C, or any other online payment methods so long as it’s applicable for you.

Q6: What if I have any other questions?
A: Whenever in doubt, you’re always encouraged to consult our sales associate any time – They will help you to your satisfaction.

Shipping Cost: Estimated freight per unit.	To be negotiated

Standard Or Nonstandard:	Standard
Application:	Motorcycle, Machinery
Hardness:	Hardened Tooth Surface

Customization:	Available \| Customized Request

sprocket

Problems with sprockets

If you’re having trouble with your HP Sprocket, you’re not alone. This bike component isn’t without issues, but it’s also susceptible to other wear and tear. Check for worn tooth surfaces and hooked tips. When teeth wear out quickly, they can break the chain, so make sure you fix them as soon as possible.
You can solve this issue by installing the latest firmware update for your Sprocket printer. The firmware update is designed to provide a safe and reliable printing experience. When your Sprocket printer doesn’t print the pictures, it is likely because it’s not receiving enough power from the battery. Make sure the battery is at least 25% before you begin.
Insufficient or improper lubrication can cause a variety of problems. Proper lubrication can prevent or remove excessive wear, or protect the chain from the environment. It can also reduce the risk of excessive chain slack. The following are just a few common problems that can cause slack in the chain.
In case of excessive wear, a new sprocket may be necessary. If the sprocket and chain do not match, replace them with a similar size. In addition, a shock absorber can be installed to minimize load. Another alternative is to install a take-up idler, which helps prevent excessive chain elongation.
Improper alignment of the sprocket is another common cause of chain drive problems. If the sprocket is not aligned correctly, it will not be able to move smoothly through the chain during rotation. The teeth of the sprocket will become hooked, preventing the roller from smoothly moving through. This will force the roller chain to cling to the sprocket, and need to be replaced.

Common types of sprockets

Power transmission equipment typically utilizes sprockets and chains. These are used in pairs to provide speed reduction. They are different from gears because the teeth of the sprocket do not mesh with those of the mating gears. They are typically made of plastic, but they can also be made of metal.
There are many common types of sprockets and chains. Some of these types of sprockets have large, narrow, or variable tooth pitch. The size of the sprocket depends on the size and pitch of the chain. If you are using a chain with a large pitch diameter, you should use a sprocket with large teeth. Conversely, a smaller pitch diameter will require a sprocket with small teeth.
Another way to identify the type of sprocket you’re using is to look at the number of strands. Single-strand sprockets are the most common, but you’ll also find many types that have multiple strands of chains. Multi-strand chains are generally larger and allow for greater torque to be transmitted from a common central shaft.
Another type is flat sprockets, which have no hub and drive through a series of holes. They are used for transmission of power or material in chain-driven systems, such as bicycles. They can also be used for overhead conveyors. In some cases, there is a special type that fits the shaft of an automobile, such as a transmission shaft.
There are many different types of sprockets, each with a unique function. Some are used for conveyor chains, while others are used for other applications. In most cases, sprockets are used in chain-driven machinery. They come in different sizes and pitches and are designed to work with particular types of chains.
When choosing a motor or transmission system, it is important to match sprockets and chains. A perfectly matched set of components will ensure that the motor and transmission work together. Generally, this alignment comes down to sprocket-to-sprocket matching. The process involves jacking up the motor and lining up the sprockets and chains. Then, the sprockets and chains are locked into place with cotter pins.

Size of sprockets

To determine the correct chain length and sprocket diameter, the first step is to understand the difference between the diameters of the sprockets and cassettes. The smaller the diameters of sprockets, the lower the chain tension. The larger the sprocket, the longer the chain will need to be. This process requires the use of a derailleur that can roll a larger number of chains.
In addition to chain length, the spacing between sprockets is another important factor. If the sprockets are too far apart, the chain may slip through the sprocket. A smaller range of sprockets will prevent this and will increase the number of discrete gear ratios. In addition, if the chain skips over a sprocket, it will cause discomfort in shifting.
Choosing the correct size of sprockets is essential for cycling. Larger sprockets are usually necessary for road bikes. Likewise, a road bike will have larger gears than a gravel bike. Larger gears will help the cyclist accelerate more smoothly and ensure a smoother ride.
Using a chain calculator can help you determine the proper size of sprockets for your bike. You can also use a chain length calculator to determine the correct chain length. This calculator uses the distance between the sprockets to calculate chain length. However, it is important to note that it is not possible to calculate the length of a chain with a single sprocket.
The size of the sprocket must be in proportion to the length of the chain. It can be controlled by either adjusting the center of the sprocket or moving it to the proper position. The center of rotation of the sprocket is defined by the chosen geometry reference.
The report covers global and regional sales of sprockets. It also contains information on competitive dynamics and market concentration status. Moreover, the report includes detailed information about the manufacturers of sprockets. The study also includes regional and global market forecasts. It also provides a detailed breakdown of sales by type, application, and region.
When choosing the right size of sprockets, remember to take measurements and do some arithmetic. For example, a smaller countershaft sprocket will improve low-speed acceleration, while a larger rear sprocket will improve fuel mileage. In addition, it is recommended that you use the reverse sprocket size if you’re going to be riding on long highways.

Maintenance of sprockets

Proper maintenance of sprockets and chains is crucial to the functioning of your bike. It is important to avoid overstretching them. If this happens, they will not fit properly and will require replacement. It is also important to prevent the kinks in your chain to reduce the amount of stress on your sprockets.
If you are unsure of the state of your sprockets and chains, you can replace them with a new chain and a new sprocket. If you notice that a chain is squeezing between the rear sprocket, it is time to replace the sprocket.
Proper maintenance of sprockets and chains involves cleaning and lubrication. Regular cleaning and lubrication can prevent damage and extend the life cycle of these parts. Proper lubrication will also ensure their smooth operation and minimize the noise. Regardless of whether your sprockets or chains are new or used, lubrication should be carried out at regular intervals to extend their useful life cycle.
Proper alignment of the sprockets and chains will ensure the most efficient performance and reliability. If you regularly change your chain and sprockets, you can prolong the life of these components and avoid costly repairs. Make sure you change the sprockets and chains only with professional mechanics. Always follow the instructions of the motorcycle manufacturer.
Proper maintenance of sprockets and chains is important to prevent premature sprocket replacement. Changing the sprocket too often can result in poor meshing, accelerating wear and tear of the new sprockets. When changing the sprocket, it is essential to turn the worn surface over before you install the new one.
It is important to follow the instructions and warning signs for proper maintenance of sprockets and chains. The safety of the workers and the environment should be prioritized. Follow the instructions of the manufacturer and avoid dangerous situations. It is essential not to anneal or electroplate the chain parts.
Proper lubrication is also vital. Use a non-petroleum based cleaner to clean the chain thoroughly and then apply lubricant. Avoid using engine oil as it is more viscous and cannot protect the chain against water.

China supplier Direct Manufacturer Supply Conveyor Chains Sprocket Roller Chain Sprocket Wheel with Heat Treatment sprocket bar
editor by CX 2023-04-24

China Roller Chains and Bush Chains Conveyor Belt Parts Transmission Gearbox OEM ODM Casting Parts Chain Wheel, Sprocket Wheel with Best Sales

Item Description

SPROCKET 5/8” X 3/8” 10B Sequence SPROCKETS

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius r3					16.0mm
Radius Width C					one.6mm
Tooth Width b1					9.0mm
Tooth Width B1					nine.1mm
Tooth Width B2					twenty five.5mm
Tooth Width B3					forty two.1mm
10B Collection ROLLER CHAINS
Pitch					fifteen.875 mm
Internal Width					9.65 mm
Roller Diameter					10.16 mm

Z	de	dp	SIMPLEX			DUPLEX			TRIPLEX
Z	de	dp	dm	D1	A	dm	D2	A	dm	D3	A
8	47.	forty one.48	twenty five	10	twenty five	25	twelve	40	twenty five	12	fifty five
9	52.six	46.42	thirty	ten	twenty five	thirty	12	40	thirty	twelve	fifty five
10	fifty seven.5	fifty one.37	35	ten	twenty five	35	twelve	40	35	12	fifty five
eleven	63.	56.34	37	12	thirty	39	14	forty	39	sixteen	fifty five
12	sixty eight.	sixty one.34	42	12	thirty	44	fourteen	forty	forty four	16	fifty five
13	73.	66.32	forty seven	12	30	forty nine	14	40	forty nine	sixteen	55
fourteen	seventy eight.	seventy one.34	52	12	30	54	14	40	54	16	fifty five
fifteen	83.	seventy six.36	fifty seven	twelve	30	fifty nine	fourteen	40	fifty nine	sixteen	fifty five
16	88.	eighty one.37	60	12	30	sixty four	16	forty five	64	16	sixty
seventeen	93.	86.39	sixty	twelve	30	sixty nine	16	45	sixty nine	16	60
eighteen	98.3	91.forty two	70	14	30	74	sixteen	forty five	seventy four	16	sixty
19	103.three	96.forty five	70	14	30	79	sixteen	forty five	seventy nine	16	60
20	108.four	one zero one.49	75	14	thirty	eighty four	16	45	eighty four	16	sixty
21	113.four	106.52	seventy five	sixteen	thirty	85	16	forty five	eighty five	twenty	60
22	118.	111.fifty five	eighty	16	30	ninety	sixteen	forty five	ninety	twenty	60
23	123.five	116.fifty eight	eighty	16	30	ninety five	16	forty five	ninety five	20	sixty
24	128.3	121.sixty two	eighty	sixteen	30	a hundred	16	forty five	a hundred	20	sixty
twenty five	134.	126.66	80	sixteen	30	105	sixteen	forty five	105	twenty	sixty
26	139.	131.70	85	20	35	a hundred and ten	20	forty five	one hundred ten	20	60
27	one hundred forty four.	136.seventy five	eighty five	20	35	a hundred and ten	20	forty five	a hundred and ten	twenty	sixty
28	148.seven	141.78	90	20	35	one hundred fifteen	20	forty five	one hundred fifteen	20	60
29	153.8	146.83	90	20	35	a hundred and fifteen	twenty	forty five	115	twenty	sixty
thirty	158.8	151.87	90	20	35	a hundred and twenty	twenty	forty five	120	twenty	60
31	163.9	156.ninety two	95	twenty	35	a hundred and twenty	twenty	45	a hundred and twenty	20	sixty
32	168.nine	161.ninety five	ninety five	twenty	35	120	twenty	forty five	a hundred and twenty	twenty	60
33	174.5	167.00	95	20	35	a hundred and twenty	20	forty five	120	20	sixty
34	179.	172.05	ninety five	twenty	35	a hundred and twenty	20	forty five	120	twenty	60
35	184.one	177.ten	95	twenty	35	120	20	45	a hundred and twenty	twenty	60
36	189.one	182.15	a hundred	twenty	35	one hundred twenty	twenty	forty five	a hundred and twenty	25	60
37	194.two	187.20	a hundred	twenty	35	120	twenty	45	a hundred and twenty	25	60
38	199.2	192.24	100	20	35	120	20	forty five	a hundred and twenty	25	sixty
39	204.two	197.29	a hundred	twenty	35	120	twenty	45	one hundred twenty	25	60
40	209.3	202.34	100	20	35	one hundred twenty	twenty	45	a hundred and twenty	twenty five	60
41	214.8	207.38	*one hundred	twenty	forty	120	20	fifty	*130	twenty five	sixty
forty two	2,199	212.forty three	*one hundred	twenty	forty	120	twenty	50	*130	25	60
forty three	224.9	217.forty eight	*one hundred	twenty	40	a hundred and twenty	20	fifty	*one hundred thirty	25	60
forty four	230.	222.53	*one hundred	20	forty	a hundred and twenty	twenty	fifty	*130	25	60
forty five	235.	227.58	*a hundred	twenty	forty	*120	20	50	*one hundred thirty	twenty five	sixty
46	240.one	232.63	*one hundred	twenty	forty	*one hundred twenty	twenty	fifty	*130	twenty five	sixty
47	245.one	237.sixty eight	*one hundred	20	40	*120	twenty	fifty	*130	twenty five	sixty
forty eight	250.2	242.seventy three	*one hundred	20	forty	*120	twenty	fifty	*130	25	sixty
49	255.2	247.78	*a hundred	20	forty	*120	20	50	*130	25	60
50	260.three	252.eighty two	*a hundred	20	40	*120	20	50	*130	twenty five	60
51	265.3	257.87	*100	20	forty	*120	twenty	50	*one hundred thirty	twenty five	60
52	270.4	262.ninety two	*a hundred	20	forty	*a hundred and twenty	20	50	*a hundred thirty	twenty five	60
53	275.four	267.97	*one hundred	twenty	40	*one hundred twenty	twenty	fifty	*one hundred thirty	twenty five	sixty
54	280.five	273.03	*one hundred	20	40	*a hundred and twenty	twenty	50	*a hundred thirty	25	sixty
fifty five	285.five	278.08	*a hundred	twenty	forty	*a hundred and twenty	20	fifty	*a hundred thirty	twenty five	sixty
fifty six	290.6	283.thirteen	*a hundred	20	forty	*a hundred and twenty	twenty	50	*a hundred thirty	twenty five	60
57	296.	288.18	*one hundred	twenty	40	*a hundred and twenty	20	fifty	*a hundred thirty	25	60
58	300.7	293.23	*100	20	43	*120	20	57	*130	25	sixty four
59	305.seven	298.28	*a hundred	twenty	43	*120	twenty	fifty seven	*130	25	64
60	310.8	303.33	*100	20	43	*a hundred and twenty	twenty	57	*one hundred thirty	twenty five	64
62	321.four	313.43	*one hundred	twenty	43	*120	twenty	fifty seven	*130	twenty five	sixty four
sixty four	331.5	323.fifty three	*one hundred	twenty	forty three	*a hundred and twenty	twenty	57	*a hundred thirty	25	67
sixty five	336.five	328.fifty eight	*100	twenty	forty three	*120	twenty	fifty seven	*a hundred thirty	twenty five	67
sixty six	341.6	333.sixty four	*100	twenty	forty three	*a hundred and twenty	20	57	*a hundred thirty	twenty five	sixty seven
sixty eight	351.seven	343.74	*one hundred	twenty	43	*a hundred and twenty	20	fifty seven	*a hundred thirty	25	sixty seven
70	361.8	353.84	*100	20	forty three	*one hundred twenty	20	57	*130	25	67
seventy two	371.9	363.94	*a hundred	20	43	*120	twenty	fifty seven	*one hundred thirty	twenty five	sixty seven
75	387.one	379.10	*100	20	43	*one hundred twenty	twenty	57	*a hundred thirty	25	67
seventy six	392.one	384.fifteen	*one hundred	twenty	43	*one hundred twenty	twenty	57	*a hundred thirty	25	67
seventy eight	402.2	394.twenty five	*one hundred	20	43	*120	twenty	fifty seven	*one hundred thirty	25	67
80	412.3	404.36	*a hundred	20	forty three	*one hundred thirty	twenty	fifty seven	*130	twenty five	67
85	437.six	429.62	*100	twenty	fifty	*a hundred thirty	twenty	58	*130	twenty five	67
90	462.8	454.88	*one hundred	20	50	*one hundred thirty	twenty	58	*130	25	sixty seven
95	488.five	480.14	*a hundred	twenty	50	*130	twenty	58	*a hundred thirty	25	sixty seven
100	513.4	505.40	*a hundred	20	fifty	*a hundred thirty	twenty	58	*one hundred thirty	25	sixty seven
one hundred ten	563.nine	555.ninety two	*one hundred	twenty	fifty	*130	twenty	fifty eight	*a hundred thirty	twenty five	67
114	584.1	576.thirteen	*100	twenty	50	*a hundred thirty	20	fifty eight	*130	25	sixty seven
a hundred and twenty	614.four	606.forty five	*100	20	fifty	*one hundred thirty	twenty	fifty eight	*a hundred thirty	25	sixty seven
a hundred twenty five	639.seven	631.51	*one hundred	twenty	50	*one hundred thirty	20	fifty eight	*a hundred thirty	25	67

Observe: *welding hub

Standard Information.

Product name	DIN ISO Standard Sprocket for Roller Chain
Materials Available	1. Stainless Steel: SS304, SS316, and many others
	two. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
	3. OEM according to your request
Surface area Treatment method	Heat treatment, Quenching treatment method, Large frequency normalizing therapy, Sharpening, Electrophoresis paint processing, Anodic oxidation therapy, etc
Characteristic	Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so forth
Style criterion	ISO DIN ANSI & Customer Drawings
Dimension	Client Drawings & ISO standard
Application	Industrial transmission gear
Bundle	Picket Case / Container and pallet, or created-to-purchase
Certification	ISO9001: 2008
Gain	Top quality very first, Services first, Aggressive cost, Quick delivery
Supply Time	20 times for samples. 45 days for official order.

Installation AND Using

The chain spoket, as a travel or deflection for chains, has pockets to hold the chain links with a D-profile cross area with flat aspect surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain website link centre plane. The chain back links are pressed firmly from the outer surfaces and every of the aspect surfaces by the angled laying surfaces at the foundation of the pockets, and also the support surfaces of the wheel human body collectively with the stop sides of the webs fashioned by the major and trailing walls of the pocket.

Recognize

When fitting new chainwheels it is extremely critical that a new chain is equipped at the very same time, and vice versa. Using an old chain with new sprockets, or a new chain with outdated sprockets will trigger rapid use.

It is important if you are putting in the chainwheels by yourself to have the manufacturing facility service guide certain to your model. Our chainwheels are manufactured to be a immediate substitute for your OEM chainwheels and as this kind of, the installation ought to be performed according to your versions services guide.

During use a chain will stretch (i.e. the pins will put on creating extension of the chain). Employing a chain which has been stretched far more than the above optimum allowance brings about the chain to trip up the teeth of the sprocket. This leads to injury to the tips of the chainwheels teeth, as the power transmitted by the chain is transmitted fully by means of the prime of the tooth, instead than the complete tooth. This final results in significant sporting of the chainwheel.

FOR CHAIN STHangZhouRDS

Specifications companies (such as ANSI and ISO) keep expectations for design, proportions, and interchangeability of transmission chains. For illustration, the following Desk exhibits information from ANSI regular B29.1-2011 (Precision Electrical power Transmission Roller Chains, Attachments, and Sprockets) created by the American Modern society of Mechanical Engineers (ASME). See the references^[8]^[9]^[ten] for added information.

ASME/ANSI B29.1-2011 Roller Chain Common SizesSizePitchMaximum Roller DiameterMinimum Greatest Tensile StrengthMeasuring Load25

Measurement	Pitch	Greatest Roller Diameter	Least Greatest Tensile Strength	Measuring Load
ASME/ANSI B29.1-2011 Roller Chain Regular Dimensions
25	.250 in (6.35 mm)	.130 in (3.thirty mm)	780 lb (350 kg)	eighteen lb (8.2 kg)
35	.375 in (9.fifty three mm)	.two hundred in (5.08 mm)	one,760 lb (800 kg)	18 lb (8.2 kg)
forty one	.five hundred in (twelve.70 mm)	.306 in (7.77 mm)	one,500 lb (680 kg)	eighteen lb (8.2 kg)
forty	.500 in (twelve.70 mm)	.312 in (7.92 mm)	three,one hundred twenty five lb (1,417 kg)	31 lb (14 kg)
fifty	.625 in (15.88 mm)	.400 in (10.sixteen mm)	four,880 lb (2,210 kg)	49 lb (22 kg)
60	.750 in (19.05 mm)	.469 in (11.ninety one mm)	seven,030 lb (3,one hundred ninety kg)	70 lb (32 kg)
80	one.000 in (twenty five.forty mm)	.625 in (15.88 mm)	twelve,500 lb (5,700 kg)	a hundred twenty five lb (fifty seven kg)
a hundred	1.250 in (31.seventy five mm)	.750 in (19.05 mm)	19,531 lb (8,859 kg)	195 lb (88 kg)
one hundred twenty	1.five hundred in (38.10 mm)	.875 in (22.23 mm)	28,one hundred twenty five lb (twelve,757 kg)	281 lb (127 kg)
a hundred and forty	1.750 in (forty four.45 mm)	1.000 in (25.40 mm)	38,280 lb (17,360 kg)	383 lb (174 kg)
a hundred and sixty	2.000 in (50.80 mm)	one.one hundred twenty five in (28.fifty eight mm)	fifty,000 lb (23,000 kg)	five hundred lb (230 kg)
a hundred and eighty	2.250 in (fifty seven.15 mm)	1.460 in (37.08 mm)	sixty three,280 lb (28,seven hundred kg)	633 lb (287 kg)
two hundred	2.500 in (sixty three.50 mm)	1.562 in (39.sixty seven mm)	78,a hundred seventy five lb (35,460 kg)	781 lb (354 kg)
240	3.000 in (seventy six.20 mm)	1.875 in (forty seven.sixty three mm)	112,five hundred lb (fifty one,000 kg)	1,000 lb (450 kg

For mnemonic functions, under is yet another presentation of key proportions from the identical common, expressed in fractions of an inch (which was portion of the contemplating powering the choice of chosen figures in the ANSI common):

Pitch (inches)	Pitch expressed in eighths	ANSI regular chain amount	Width (inches)
¹⁄₄	^two⁄_eight	two5	¹⁄₈
³⁄_eight	^three⁄₈	35	^three⁄₁₆
¹⁄_two	⁴⁄_eight	four1	¹⁄_four
^one⁄₂	⁴⁄₈	four	^five⁄₁₆
^five⁄_eight	^five⁄₈	5	^three⁄₈
^three⁄_four	^six⁄_eight	six	^one⁄₂
1	^eight⁄₈	eight	⁵⁄_eight

Notes:
one. The pitch is the distance in between roller centers. The width is the distance in between the website link plates (i.e. marginally much more than the roller width to allow for clearance).
two. The proper-hand digit of the common denotes 0 = regular chain, 1 = lightweight chain, 5 = rollerless bushing chain.
three. The left-hand digit denotes the amount of eighths of an inch that make up the pitch.
four. An “H” pursuing the normal number denotes heavyweight chain. A hyphenated variety pursuing the standard variety denotes double-strand (2), triple-strand (3), and so on. Hence 60H-3 denotes quantity 60 heavyweight triple-strand chain.
A common bicycle chain (for derailleur gears) utilizes narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load ability. The a lot more sprockets at the rear wheel (traditionally 3-6, today 7-twelve sprockets), the narrower the chain. Chains are bought in accordance to the number of speeds they are developed to perform with, for example, “ten speed chain”. Hub gear or single pace bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the greatest thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped backlinks have an even amount of backlinks, with every single narrow url adopted by a broad one. Chains built up with a uniform variety of website link, slim at 1 and broad at the other finish, can be manufactured with an odd variety of back links, which can be an benefit to adapt to a special chainwheel-length on the other aspect this sort of a chain tends to be not so powerful.

Roller chains created making use of ISO standard are at times called as isochains.

WHY Select US

one. Reliable High quality Assurance Program
2. Slicing-Edge Pc-Controlled CNC Equipment
three. Bespoke Remedies from Highly Knowledgeable Experts
4. Customization and OEM Offered for Certain Application
5. Comprehensive Stock of Spare Parts and Add-ons
6. Well-Produced Around the world Marketing and advertising Network
seven. Effective Soon after-Sale Service System

The 219 sets of advanced automated creation gear supply ensures for large item good quality. The 167 engineers and specialists with senior skilled titles can design and create items to satisfy the precise calls for of buyers, and OEM customizations are also offered with us. Our sound worldwide support network can supply clients with timely right after-income technological companies.

We are not just a producer and supplier, but also an market expert. We work professional-actively with you to offer specialist suggestions and product tips in purchase to finish up with a most value efficient merchandise obtainable for your particular software. The consumers we provide throughout the world selection from conclude users to distributors and OEMs. Our OEM replacements can be substituted where ever essential and suitable for each restore and new assemblies.

US $9.7
/ Piece
| 3,000 Pieces

(Min. Order)

###

Standard Or Nonstandard:	Nonstandard, Standard
Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Hardened Tooth Surface
Manufacturing Method:	Cut Gear, Rolling Gear
Toothed Portion Shape:	Spur Gear
Material:	Alloy Steel,

###

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius r3					16.0mm
Radius Width C					1.6mm
Tooth Width b1					9.0mm
Tooth Width B1					9.1mm
Tooth Width B2					25.5mm
Tooth Width B3					42.1mm
10B SERIES ROLLER CHAINS
Pitch					15.875 mm
Internal Width					9.65 mm
Roller Diameter					10.16 mm

###

Z	de	dp	SIMPLEX			DUPLEX			TRIPLEX
Z	de	dp	dm	D1	A	dm	D2	A	dm	D3	A
8	47.0	41.48	25	10	25	25	12	40	25	12	55
9	52.6	46.42	30	10	25	30	12	40	30	12	55
10	57.5	51.37	35	10	25	35	12	40	35	12	55
11	63.0	56.34	37	12	30	39	14	40	39	16	55
12	68.0	61.34	42	12	30	44	14	40	44	16	55
13	73.0	66.32	47	12	30	49	14	40	49	16	55
14	78.0	71.34	52	12	30	54	14	40	54	16	55
15	83.0	76.36	57	12	30	59	14	40	59	16	55
16	88.0	81.37	60	12	30	64	16	45	64	16	60
17	93.0	86.39	60	12	30	69	16	45	69	16	60
18	98.3	91.42	70	14	30	74	16	45	74	16	60
19	103.3	96.45	70	14	30	79	16	45	79	16	60
20	108.4	101.49	75	14	30	84	16	45	84	16	60
21	113.4	106.52	75	16	30	85	16	45	85	20	60
22	118.0	111.55	80	16	30	90	16	45	90	20	60
23	123.5	116.58	80	16	30	95	16	45	95	20	60
24	128.3	121.62	80	16	30	100	16	45	100	20	60
25	134.0	126.66	80	16	30	105	16	45	105	20	60
26	139.0	131.70	85	20	35	110	20	45	110	20	60
27	144.0	136.75	85	20	35	110	20	45	110	20	60
28	148.7	141.78	90	20	35	115	20	45	115	20	60
29	153.8	146.83	90	20	35	115	20	45	115	20	60
30	158.8	151.87	90	20	35	120	20	45	120	20	60
31	163.9	156.92	95	20	35	120	20	45	120	20	60
32	168.9	161.95	95	20	35	120	20	45	120	20	60
33	174.5	167.00	95	20	35	120	20	45	120	20	60
34	179.0	172.05	95	20	35	120	20	45	120	20	60
35	184.1	177.10	95	20	35	120	20	45	120	20	60
36	189.1	182.15	100	20	35	120	20	45	120	25	60
37	194.2	187.20	100	20	35	120	20	45	120	25	60
38	199.2	192.24	100	20	35	120	20	45	120	25	60
39	204.2	197.29	100	20	35	120	20	45	120	25	60
40	209.3	202.34	100	20	35	120	20	45	120	25	60
41	214.8	207.38	*100	20	40	120	20	50	*130	25	60
42	2,199	212.43	*100	20	40	120	20	50	*130	25	60
43	224.9	217.48	*100	20	40	120	20	50	*130	25	60
44	230.0	222.53	*100	20	40	120	20	50	*130	25	60
45	235.0	227.58	*100	20	40	*120	20	50	*130	25	60
46	240.1	232.63	*100	20	40	*120	20	50	*130	25	60
47	245.1	237.68	*100	20	40	*120	20	50	*130	25	60
48	250.2	242.73	*100	20	40	*120	20	50	*130	25	60
49	255.2	247.78	*100	20	40	*120	20	50	*130	25	60
50	260.3	252.82	*100	20	40	*120	20	50	*130	25	60
51	265.3	257.87	*100	20	40	*120	20	50	*130	25	60
52	270.4	262.92	*100	20	40	*120	20	50	*130	25	60
53	275.4	267.97	*100	20	40	*120	20	50	*130	25	60
54	280.5	273.03	*100	20	40	*120	20	50	*130	25	60
55	285.5	278.08	*100	20	40	*120	20	50	*130	25	60
56	290.6	283.13	*100	20	40	*120	20	50	*130	25	60
57	296.0	288.18	*100	20	40	*120	20	50	*130	25	60
58	300.7	293.23	*100	20	43	*120	20	57	*130	25	64
59	305.7	298.28	*100	20	43	*120	20	57	*130	25	64
60	310.8	303.33	*100	20	43	*120	20	57	*130	25	64
62	321.4	313.43	*100	20	43	*120	20	57	*130	25	64
64	331.5	323.53	*100	20	43	*120	20	57	*130	25	67
65	336.5	328.58	*100	20	43	*120	20	57	*130	25	67
66	341.6	333.64	*100	20	43	*120	20	57	*130	25	67
68	351.7	343.74	*100	20	43	*120	20	57	*130	25	67
70	361.8	353.84	*100	20	43	*120	20	57	*130	25	67
72	371.9	363.94	*100	20	43	*120	20	57	*130	25	67
75	387.1	379.10	*100	20	43	*120	20	57	*130	25	67
76	392.1	384.15	*100	20	43	*120	20	57	*130	25	67
78	402.2	394.25	*100	20	43	*120	20	57	*130	25	67
80	412.3	404.36	*100	20	43	*130	20	57	*130	25	67
85	437.6	429.62	*100	20	50	*130	20	58	*130	25	67
90	462.8	454.88	*100	20	50	*130	20	58	*130	25	67
95	488.5	480.14	*100	20	50	*130	20	58	*130	25	67
100	513.4	505.40	*100	20	50	*130	20	58	*130	25	67
110	563.9	555.92	*100	20	50	*130	20	58	*130	25	67
114	584.1	576.13	*100	20	50	*130	20	58	*130	25	67
120	614.4	606.45	*100	20	50	*130	20	58	*130	25	67
125	639.7	631.51	*100	20	50	*130	20	58	*130	25	67

###

Product name	DIN ISO Standard Sprocket for Roller Chain
Materials Available	1. Stainless Steel: SS304, SS316, etc
	2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
	3. OEM according to your request
Surface Treatment	Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic	Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion	ISO DIN ANSI & Customer Drawings
Size	Customer Drawings & ISO standard
Application	Industrial transmission equipment
Package	Wooden Case / Container and pallet, or made-to-order
Certificate	ISO9001: 2008
Advantage	Quality first, Service first, Competitive price, Fast delivery
Delivery Time	20 days for samples. 45 days for official order.

###

Size	Pitch	Maximum Roller Diameter	Minimum Ultimate Tensile Strength	Measuring Load
ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
25	0.250 in (6.35 mm)	0.130 in (3.30 mm)	780 lb (350 kg)	18 lb (8.2 kg)
35	0.375 in (9.53 mm)	0.200 in (5.08 mm)	1,760 lb (800 kg)	18 lb (8.2 kg)
41	0.500 in (12.70 mm)	0.306 in (7.77 mm)	1,500 lb (680 kg)	18 lb (8.2 kg)
40	0.500 in (12.70 mm)	0.312 in (7.92 mm)	3,125 lb (1,417 kg)	31 lb (14 kg)
50	0.625 in (15.88 mm)	0.400 in (10.16 mm)	4,880 lb (2,210 kg)	49 lb (22 kg)
60	0.750 in (19.05 mm)	0.469 in (11.91 mm)	7,030 lb (3,190 kg)	70 lb (32 kg)
80	1.000 in (25.40 mm)	0.625 in (15.88 mm)	12,500 lb (5,700 kg)	125 lb (57 kg)
100	1.250 in (31.75 mm)	0.750 in (19.05 mm)	19,531 lb (8,859 kg)	195 lb (88 kg)
120	1.500 in (38.10 mm)	0.875 in (22.23 mm)	28,125 lb (12,757 kg)	281 lb (127 kg)
140	1.750 in (44.45 mm)	1.000 in (25.40 mm)	38,280 lb (17,360 kg)	383 lb (174 kg)
160	2.000 in (50.80 mm)	1.125 in (28.58 mm)	50,000 lb (23,000 kg)	500 lb (230 kg)
180	2.250 in (57.15 mm)	1.460 in (37.08 mm)	63,280 lb (28,700 kg)	633 lb (287 kg)
200	2.500 in (63.50 mm)	1.562 in (39.67 mm)	78,175 lb (35,460 kg)	781 lb (354 kg)
240	3.000 in (76.20 mm)	1.875 in (47.63 mm)	112,500 lb (51,000 kg)	1,000 lb (450 kg

###

Pitch (inches)	Pitch expressed in eighths	ANSI standard chain number	Width (inches)
¹⁄₄	²⁄₈	25	¹⁄₈
³⁄₈	³⁄₈	35	³⁄₁₆
¹⁄₂	⁴⁄₈	41	¹⁄₄
¹⁄₂	⁴⁄₈	40	⁵⁄₁₆
⁵⁄₈	⁵⁄₈	50	³⁄₈
³⁄₄	⁶⁄₈	60	¹⁄₂
1	⁸⁄₈	80	⁵⁄₈

US $9.7
/ Piece
| 3,000 Pieces

(Min. Order)

###

Standard Or Nonstandard:	Nonstandard, Standard
Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Hardened Tooth Surface
Manufacturing Method:	Cut Gear, Rolling Gear
Toothed Portion Shape:	Spur Gear
Material:	Alloy Steel,

###

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius r3					16.0mm
Radius Width C					1.6mm
Tooth Width b1					9.0mm
Tooth Width B1					9.1mm
Tooth Width B2					25.5mm
Tooth Width B3					42.1mm
10B SERIES ROLLER CHAINS
Pitch					15.875 mm
Internal Width					9.65 mm
Roller Diameter					10.16 mm

###

Z	de	dp	SIMPLEX			DUPLEX			TRIPLEX
Z	de	dp	dm	D1	A	dm	D2	A	dm	D3	A
8	47.0	41.48	25	10	25	25	12	40	25	12	55
9	52.6	46.42	30	10	25	30	12	40	30	12	55
10	57.5	51.37	35	10	25	35	12	40	35	12	55
11	63.0	56.34	37	12	30	39	14	40	39	16	55
12	68.0	61.34	42	12	30	44	14	40	44	16	55
13	73.0	66.32	47	12	30	49	14	40	49	16	55
14	78.0	71.34	52	12	30	54	14	40	54	16	55
15	83.0	76.36	57	12	30	59	14	40	59	16	55
16	88.0	81.37	60	12	30	64	16	45	64	16	60
17	93.0	86.39	60	12	30	69	16	45	69	16	60
18	98.3	91.42	70	14	30	74	16	45	74	16	60
19	103.3	96.45	70	14	30	79	16	45	79	16	60
20	108.4	101.49	75	14	30	84	16	45	84	16	60
21	113.4	106.52	75	16	30	85	16	45	85	20	60
22	118.0	111.55	80	16	30	90	16	45	90	20	60
23	123.5	116.58	80	16	30	95	16	45	95	20	60
24	128.3	121.62	80	16	30	100	16	45	100	20	60
25	134.0	126.66	80	16	30	105	16	45	105	20	60
26	139.0	131.70	85	20	35	110	20	45	110	20	60
27	144.0	136.75	85	20	35	110	20	45	110	20	60
28	148.7	141.78	90	20	35	115	20	45	115	20	60
29	153.8	146.83	90	20	35	115	20	45	115	20	60
30	158.8	151.87	90	20	35	120	20	45	120	20	60
31	163.9	156.92	95	20	35	120	20	45	120	20	60
32	168.9	161.95	95	20	35	120	20	45	120	20	60
33	174.5	167.00	95	20	35	120	20	45	120	20	60
34	179.0	172.05	95	20	35	120	20	45	120	20	60
35	184.1	177.10	95	20	35	120	20	45	120	20	60
36	189.1	182.15	100	20	35	120	20	45	120	25	60
37	194.2	187.20	100	20	35	120	20	45	120	25	60
38	199.2	192.24	100	20	35	120	20	45	120	25	60
39	204.2	197.29	100	20	35	120	20	45	120	25	60
40	209.3	202.34	100	20	35	120	20	45	120	25	60
41	214.8	207.38	*100	20	40	120	20	50	*130	25	60
42	2,199	212.43	*100	20	40	120	20	50	*130	25	60
43	224.9	217.48	*100	20	40	120	20	50	*130	25	60
44	230.0	222.53	*100	20	40	120	20	50	*130	25	60
45	235.0	227.58	*100	20	40	*120	20	50	*130	25	60
46	240.1	232.63	*100	20	40	*120	20	50	*130	25	60
47	245.1	237.68	*100	20	40	*120	20	50	*130	25	60
48	250.2	242.73	*100	20	40	*120	20	50	*130	25	60
49	255.2	247.78	*100	20	40	*120	20	50	*130	25	60
50	260.3	252.82	*100	20	40	*120	20	50	*130	25	60
51	265.3	257.87	*100	20	40	*120	20	50	*130	25	60
52	270.4	262.92	*100	20	40	*120	20	50	*130	25	60
53	275.4	267.97	*100	20	40	*120	20	50	*130	25	60
54	280.5	273.03	*100	20	40	*120	20	50	*130	25	60
55	285.5	278.08	*100	20	40	*120	20	50	*130	25	60
56	290.6	283.13	*100	20	40	*120	20	50	*130	25	60
57	296.0	288.18	*100	20	40	*120	20	50	*130	25	60
58	300.7	293.23	*100	20	43	*120	20	57	*130	25	64
59	305.7	298.28	*100	20	43	*120	20	57	*130	25	64
60	310.8	303.33	*100	20	43	*120	20	57	*130	25	64
62	321.4	313.43	*100	20	43	*120	20	57	*130	25	64
64	331.5	323.53	*100	20	43	*120	20	57	*130	25	67
65	336.5	328.58	*100	20	43	*120	20	57	*130	25	67
66	341.6	333.64	*100	20	43	*120	20	57	*130	25	67
68	351.7	343.74	*100	20	43	*120	20	57	*130	25	67
70	361.8	353.84	*100	20	43	*120	20	57	*130	25	67
72	371.9	363.94	*100	20	43	*120	20	57	*130	25	67
75	387.1	379.10	*100	20	43	*120	20	57	*130	25	67
76	392.1	384.15	*100	20	43	*120	20	57	*130	25	67
78	402.2	394.25	*100	20	43	*120	20	57	*130	25	67
80	412.3	404.36	*100	20	43	*130	20	57	*130	25	67
85	437.6	429.62	*100	20	50	*130	20	58	*130	25	67
90	462.8	454.88	*100	20	50	*130	20	58	*130	25	67
95	488.5	480.14	*100	20	50	*130	20	58	*130	25	67
100	513.4	505.40	*100	20	50	*130	20	58	*130	25	67
110	563.9	555.92	*100	20	50	*130	20	58	*130	25	67
114	584.1	576.13	*100	20	50	*130	20	58	*130	25	67
120	614.4	606.45	*100	20	50	*130	20	58	*130	25	67
125	639.7	631.51	*100	20	50	*130	20	58	*130	25	67

###

Product name	DIN ISO Standard Sprocket for Roller Chain
Materials Available	1. Stainless Steel: SS304, SS316, etc
	2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
	3. OEM according to your request
Surface Treatment	Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic	Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion	ISO DIN ANSI & Customer Drawings
Size	Customer Drawings & ISO standard
Application	Industrial transmission equipment
Package	Wooden Case / Container and pallet, or made-to-order
Certificate	ISO9001: 2008
Advantage	Quality first, Service first, Competitive price, Fast delivery
Delivery Time	20 days for samples. 45 days for official order.

###

Size	Pitch	Maximum Roller Diameter	Minimum Ultimate Tensile Strength	Measuring Load
ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
25	0.250 in (6.35 mm)	0.130 in (3.30 mm)	780 lb (350 kg)	18 lb (8.2 kg)
35	0.375 in (9.53 mm)	0.200 in (5.08 mm)	1,760 lb (800 kg)	18 lb (8.2 kg)
41	0.500 in (12.70 mm)	0.306 in (7.77 mm)	1,500 lb (680 kg)	18 lb (8.2 kg)
40	0.500 in (12.70 mm)	0.312 in (7.92 mm)	3,125 lb (1,417 kg)	31 lb (14 kg)
50	0.625 in (15.88 mm)	0.400 in (10.16 mm)	4,880 lb (2,210 kg)	49 lb (22 kg)
60	0.750 in (19.05 mm)	0.469 in (11.91 mm)	7,030 lb (3,190 kg)	70 lb (32 kg)
80	1.000 in (25.40 mm)	0.625 in (15.88 mm)	12,500 lb (5,700 kg)	125 lb (57 kg)
100	1.250 in (31.75 mm)	0.750 in (19.05 mm)	19,531 lb (8,859 kg)	195 lb (88 kg)
120	1.500 in (38.10 mm)	0.875 in (22.23 mm)	28,125 lb (12,757 kg)	281 lb (127 kg)
140	1.750 in (44.45 mm)	1.000 in (25.40 mm)	38,280 lb (17,360 kg)	383 lb (174 kg)
160	2.000 in (50.80 mm)	1.125 in (28.58 mm)	50,000 lb (23,000 kg)	500 lb (230 kg)
180	2.250 in (57.15 mm)	1.460 in (37.08 mm)	63,280 lb (28,700 kg)	633 lb (287 kg)
200	2.500 in (63.50 mm)	1.562 in (39.67 mm)	78,175 lb (35,460 kg)	781 lb (354 kg)
240	3.000 in (76.20 mm)	1.875 in (47.63 mm)	112,500 lb (51,000 kg)	1,000 lb (450 kg

###

Pitch (inches)	Pitch expressed in eighths	ANSI standard chain number	Width (inches)
¹⁄₄	²⁄₈	25	¹⁄₈
³⁄₈	³⁄₈	35	³⁄₁₆
¹⁄₂	⁴⁄₈	41	¹⁄₄
¹⁄₂	⁴⁄₈	40	⁵⁄₁₆
⁵⁄₈	⁵⁄₈	50	³⁄₈
³⁄₄	⁶⁄₈	60	¹⁄₂
1	⁸⁄₈	80	⁵⁄₈

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China Roller Chains and Bush Chains Conveyor Belt Parts Transmission Gearbox OEM ODM Casting Parts Chain Wheel, Sprocket Wheel with Best Sales
editor by czh 2023-01-03

China factory Transmission Conveyor Belt Parts Gearbox Short Pitch Precision Roller Chains Hardening Teeth Keyway and Screw (DIN/ANSI/JIS Standard or Made Hub Sprocket with Best Sales

Solution Description

SPROCKET 5/8” X 3/8” 10B Series SPROCKETS

Notice: *welding hub

Fundamental Info.

Set up AND Making use of

The chain spoket, as a drive or deflection for chains, has pockets to maintain the chain hyperlinks with a D-profile cross part with flat side surfaces parallel to the centre airplane of the chain back links, and outer surfaces at correct angles to the chain link centre aircraft. The chain hyperlinks are pressed firmly towards the outer surfaces and every single of the aspect surfaces by the angled laying surfaces at the foundation of the pockets, and also the support surfaces of the wheel body jointly with the stop sides of the webs shaped by the leading and trailing walls of the pocket.

Notice

When fitting new chainwheels it is very critical that a new chain is fitted at the identical time, and vice versa. Employing an old chain with new sprockets, or a new chain with outdated sprockets will trigger fast put on.

It is essential if you are putting in the chainwheels oneself to have the factory services handbook distinct to your model. Our chainwheels are created to be a direct substitution for your OEM chainwheels and as this sort of, the set up need to be performed according to your models provider handbook.

For the duration of use a chain will extend (i.e. the pins will wear leading to extension of the chain). Making use of a chain which has been stretched a lot more than the earlier mentioned greatest allowance causes the chain to ride up the tooth of the sprocket. This triggers harm to the ideas of the chainwheels teeth, as the drive transmitted by the chain is transmitted completely by means of the best of the tooth, rather than the whole tooth. This final results in severe donning of the chainwheel.

FOR CHAIN STHangZhouRDS

Specifications businesses (this sort of as ANSI and ISO) maintain expectations for layout, proportions, and interchangeability of transmission chains. For case in point, the following Table shows data from ANSI common B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) designed by the American Modern society of Mechanical Engineers (ASME). See the references^[8]^[9]^[10] for added details.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Supreme Tensile StrengthMeasuring Load25

For mnemonic needs, under is one more presentation of key proportions from the very same common, expressed in fractions of an inch (which was part of the contemplating powering the decision of preferred numbers in the ANSI standard):

Notes:
one. The pitch is the distance between roller facilities. The width is the distance in between the website link plates (i.e. a bit more than the roller width to enable for clearance).
two. The correct-hand digit of the standard denotes 0 = standard chain, 1 = light-weight chain, 5 = rollerless bushing chain.
three. The left-hand digit denotes the amount of eighths of an inch that make up the pitch.
4. An “H” pursuing the normal variety denotes heavyweight chain. A hyphenated quantity adhering to the standard quantity denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A normal bicycle chain (for derailleur gears) utilizes narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not have an effect on the load potential. The far more sprockets at the rear wheel (historically 3-6, nowadays 7-twelve sprockets), the narrower the chain. Chains are marketed in accordance to the number of speeds they are made to function with, for instance, “10 velocity chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, exactly where 1/8″ refers to the highest thickness of a sprocket that can be utilised with the chain.

Generally chains with parallel shaped links have an even amount of back links, with each and every slim hyperlink adopted by a broad one. Chains built up with a uniform type of hyperlink, slim at 1 and broad at the other stop, can be created with an odd quantity of back links, which can be an benefit to adapt to a special chainwheel-distance on the other aspect this sort of a chain tends to be not so robust.

Roller chains made employing ISO common are occasionally called as isochains.

WHY Pick US

one. Trustworthy Top quality Assurance Method
two. Reducing-Edge Computer-Controlled CNC Equipment
three. Bespoke Solutions from Hugely Seasoned Specialists
four. Customization and OEM Offered for Specific Software
5. Extensive Inventory of Spare Components and Equipment
6. Well-Developed Around the world Advertising Network
7. Successful Following-Sale Support Program

The 219 sets of sophisticated automated production tools supply ensures for substantial item top quality. The 167 engineers and experts with senior specialist titles can design and build products to fulfill the specific demands of customers, and OEM customizations are also accessible with us. Our sound worldwide services network can offer consumers with timely following-revenue complex providers.

We are not just a company and provider, but also an market expert. We operate pro-actively with you to offer you professional advice and product suggestions in buy to conclude up with a most cost successful merchandise offered for your certain software. The consumers we serve around the world assortment from end customers to distributors and OEMs. Our OEM replacements can be substituted where ever essential and suited for equally fix and new assemblies.

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius r3					16.0mm
Radius Width C					1.6mm
Tooth Width b1					9.0mm
Tooth Width B1					9.1mm
Tooth Width B2					25.5mm
Tooth Width B3					42.1mm
10B SERIES ROLLER CHAINS
Pitch					15.875 mm
Internal Width					9.65 mm
Roller Diameter					10.16 mm

###

Z	de	dp	SIMPLEX			DUPLEX			TRIPLEX
Z	de	dp	dm	D1	A	dm	D2	A	dm	D3	A
8	47.0	41.48	25	10	25	25	12	40	25	12	55
9	52.6	46.42	30	10	25	30	12	40	30	12	55
10	57.5	51.37	35	10	25	35	12	40	35	12	55
11	63.0	56.34	37	12	30	39	14	40	39	16	55
12	68.0	61.34	42	12	30	44	14	40	44	16	55
13	73.0	66.32	47	12	30	49	14	40	49	16	55
14	78.0	71.34	52	12	30	54	14	40	54	16	55
15	83.0	76.36	57	12	30	59	14	40	59	16	55
16	88.0	81.37	60	12	30	64	16	45	64	16	60
17	93.0	86.39	60	12	30	69	16	45	69	16	60
18	98.3	91.42	70	14	30	74	16	45	74	16	60
19	103.3	96.45	70	14	30	79	16	45	79	16	60
20	108.4	101.49	75	14	30	84	16	45	84	16	60
21	113.4	106.52	75	16	30	85	16	45	85	20	60
22	118.0	111.55	80	16	30	90	16	45	90	20	60
23	123.5	116.58	80	16	30	95	16	45	95	20	60
24	128.3	121.62	80	16	30	100	16	45	100	20	60
25	134.0	126.66	80	16	30	105	16	45	105	20	60
26	139.0	131.70	85	20	35	110	20	45	110	20	60
27	144.0	136.75	85	20	35	110	20	45	110	20	60
28	148.7	141.78	90	20	35	115	20	45	115	20	60
29	153.8	146.83	90	20	35	115	20	45	115	20	60
30	158.8	151.87	90	20	35	120	20	45	120	20	60
31	163.9	156.92	95	20	35	120	20	45	120	20	60
32	168.9	161.95	95	20	35	120	20	45	120	20	60
33	174.5	167.00	95	20	35	120	20	45	120	20	60
34	179.0	172.05	95	20	35	120	20	45	120	20	60
35	184.1	177.10	95	20	35	120	20	45	120	20	60
36	189.1	182.15	100	20	35	120	20	45	120	25	60
37	194.2	187.20	100	20	35	120	20	45	120	25	60
38	199.2	192.24	100	20	35	120	20	45	120	25	60
39	204.2	197.29	100	20	35	120	20	45	120	25	60
40	209.3	202.34	100	20	35	120	20	45	120	25	60
41	214.8	207.38	*100	20	40	120	20	50	*130	25	60
42	2,199	212.43	*100	20	40	120	20	50	*130	25	60
43	224.9	217.48	*100	20	40	120	20	50	*130	25	60
44	230.0	222.53	*100	20	40	120	20	50	*130	25	60
45	235.0	227.58	*100	20	40	*120	20	50	*130	25	60
46	240.1	232.63	*100	20	40	*120	20	50	*130	25	60
47	245.1	237.68	*100	20	40	*120	20	50	*130	25	60
48	250.2	242.73	*100	20	40	*120	20	50	*130	25	60
49	255.2	247.78	*100	20	40	*120	20	50	*130	25	60
50	260.3	252.82	*100	20	40	*120	20	50	*130	25	60
51	265.3	257.87	*100	20	40	*120	20	50	*130	25	60
52	270.4	262.92	*100	20	40	*120	20	50	*130	25	60
53	275.4	267.97	*100	20	40	*120	20	50	*130	25	60
54	280.5	273.03	*100	20	40	*120	20	50	*130	25	60
55	285.5	278.08	*100	20	40	*120	20	50	*130	25	60
56	290.6	283.13	*100	20	40	*120	20	50	*130	25	60
57	296.0	288.18	*100	20	40	*120	20	50	*130	25	60
58	300.7	293.23	*100	20	43	*120	20	57	*130	25	64
59	305.7	298.28	*100	20	43	*120	20	57	*130	25	64
60	310.8	303.33	*100	20	43	*120	20	57	*130	25	64
62	321.4	313.43	*100	20	43	*120	20	57	*130	25	64
64	331.5	323.53	*100	20	43	*120	20	57	*130	25	67
65	336.5	328.58	*100	20	43	*120	20	57	*130	25	67
66	341.6	333.64	*100	20	43	*120	20	57	*130	25	67
68	351.7	343.74	*100	20	43	*120	20	57	*130	25	67
70	361.8	353.84	*100	20	43	*120	20	57	*130	25	67
72	371.9	363.94	*100	20	43	*120	20	57	*130	25	67
75	387.1	379.10	*100	20	43	*120	20	57	*130	25	67
76	392.1	384.15	*100	20	43	*120	20	57	*130	25	67
78	402.2	394.25	*100	20	43	*120	20	57	*130	25	67
80	412.3	404.36	*100	20	43	*130	20	57	*130	25	67
85	437.6	429.62	*100	20	50	*130	20	58	*130	25	67
90	462.8	454.88	*100	20	50	*130	20	58	*130	25	67
95	488.5	480.14	*100	20	50	*130	20	58	*130	25	67
100	513.4	505.40	*100	20	50	*130	20	58	*130	25	67
110	563.9	555.92	*100	20	50	*130	20	58	*130	25	67
114	584.1	576.13	*100	20	50	*130	20	58	*130	25	67
120	614.4	606.45	*100	20	50	*130	20	58	*130	25	67
125	639.7	631.51	*100	20	50	*130	20	58	*130	25	67

###

Product name	DIN ISO Standard Sprocket for Roller Chain
Materials Available	1. Stainless Steel: SS304, SS316, etc
	2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
	3. OEM according to your request
Surface Treatment	Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic	Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion	ISO DIN ANSI & Customer Drawings
Size	Customer Drawings & ISO standard
Application	Industrial transmission equipment
Package	Wooden Case / Container and pallet, or made-to-order
Certificate	ISO9001: 2008
Advantage	Quality first, Service first, Competitive price, Fast delivery
Delivery Time	20 days for samples. 45 days for official order.

###

Size	Pitch	Maximum Roller Diameter	Minimum Ultimate Tensile Strength	Measuring Load
ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
25	0.250 in (6.35 mm)	0.130 in (3.30 mm)	780 lb (350 kg)	18 lb (8.2 kg)
35	0.375 in (9.53 mm)	0.200 in (5.08 mm)	1,760 lb (800 kg)	18 lb (8.2 kg)
41	0.500 in (12.70 mm)	0.306 in (7.77 mm)	1,500 lb (680 kg)	18 lb (8.2 kg)
40	0.500 in (12.70 mm)	0.312 in (7.92 mm)	3,125 lb (1,417 kg)	31 lb (14 kg)
50	0.625 in (15.88 mm)	0.400 in (10.16 mm)	4,880 lb (2,210 kg)	49 lb (22 kg)
60	0.750 in (19.05 mm)	0.469 in (11.91 mm)	7,030 lb (3,190 kg)	70 lb (32 kg)
80	1.000 in (25.40 mm)	0.625 in (15.88 mm)	12,500 lb (5,700 kg)	125 lb (57 kg)
100	1.250 in (31.75 mm)	0.750 in (19.05 mm)	19,531 lb (8,859 kg)	195 lb (88 kg)
120	1.500 in (38.10 mm)	0.875 in (22.23 mm)	28,125 lb (12,757 kg)	281 lb (127 kg)
140	1.750 in (44.45 mm)	1.000 in (25.40 mm)	38,280 lb (17,360 kg)	383 lb (174 kg)
160	2.000 in (50.80 mm)	1.125 in (28.58 mm)	50,000 lb (23,000 kg)	500 lb (230 kg)
180	2.250 in (57.15 mm)	1.460 in (37.08 mm)	63,280 lb (28,700 kg)	633 lb (287 kg)
200	2.500 in (63.50 mm)	1.562 in (39.67 mm)	78,175 lb (35,460 kg)	781 lb (354 kg)
240	3.000 in (76.20 mm)	1.875 in (47.63 mm)	112,500 lb (51,000 kg)	1,000 lb (450 kg

###

Pitch (inches)	Pitch expressed in eighths	ANSI standard chain number	Width (inches)
¹⁄₄	²⁄₈	25	¹⁄₈
³⁄₈	³⁄₈	35	³⁄₁₆
¹⁄₂	⁴⁄₈	41	¹⁄₄
¹⁄₂	⁴⁄₈	40	⁵⁄₁₆
⁵⁄₈	⁵⁄₈	50	³⁄₈
³⁄₄	⁶⁄₈	60	¹⁄₂
1	⁸⁄₈	80	⁵⁄₈

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius r3					16.0mm
Radius Width C					1.6mm
Tooth Width b1					9.0mm
Tooth Width B1					9.1mm
Tooth Width B2					25.5mm
Tooth Width B3					42.1mm
10B SERIES ROLLER CHAINS
Pitch					15.875 mm
Internal Width					9.65 mm
Roller Diameter					10.16 mm

###

Z	de	dp	SIMPLEX			DUPLEX			TRIPLEX
Z	de	dp	dm	D1	A	dm	D2	A	dm	D3	A
8	47.0	41.48	25	10	25	25	12	40	25	12	55
9	52.6	46.42	30	10	25	30	12	40	30	12	55
10	57.5	51.37	35	10	25	35	12	40	35	12	55
11	63.0	56.34	37	12	30	39	14	40	39	16	55
12	68.0	61.34	42	12	30	44	14	40	44	16	55
13	73.0	66.32	47	12	30	49	14	40	49	16	55
14	78.0	71.34	52	12	30	54	14	40	54	16	55
15	83.0	76.36	57	12	30	59	14	40	59	16	55
16	88.0	81.37	60	12	30	64	16	45	64	16	60
17	93.0	86.39	60	12	30	69	16	45	69	16	60
18	98.3	91.42	70	14	30	74	16	45	74	16	60
19	103.3	96.45	70	14	30	79	16	45	79	16	60
20	108.4	101.49	75	14	30	84	16	45	84	16	60
21	113.4	106.52	75	16	30	85	16	45	85	20	60
22	118.0	111.55	80	16	30	90	16	45	90	20	60
23	123.5	116.58	80	16	30	95	16	45	95	20	60
24	128.3	121.62	80	16	30	100	16	45	100	20	60
25	134.0	126.66	80	16	30	105	16	45	105	20	60
26	139.0	131.70	85	20	35	110	20	45	110	20	60
27	144.0	136.75	85	20	35	110	20	45	110	20	60
28	148.7	141.78	90	20	35	115	20	45	115	20	60
29	153.8	146.83	90	20	35	115	20	45	115	20	60
30	158.8	151.87	90	20	35	120	20	45	120	20	60
31	163.9	156.92	95	20	35	120	20	45	120	20	60
32	168.9	161.95	95	20	35	120	20	45	120	20	60
33	174.5	167.00	95	20	35	120	20	45	120	20	60
34	179.0	172.05	95	20	35	120	20	45	120	20	60
35	184.1	177.10	95	20	35	120	20	45	120	20	60
36	189.1	182.15	100	20	35	120	20	45	120	25	60
37	194.2	187.20	100	20	35	120	20	45	120	25	60
38	199.2	192.24	100	20	35	120	20	45	120	25	60
39	204.2	197.29	100	20	35	120	20	45	120	25	60
40	209.3	202.34	100	20	35	120	20	45	120	25	60
41	214.8	207.38	*100	20	40	120	20	50	*130	25	60
42	2,199	212.43	*100	20	40	120	20	50	*130	25	60
43	224.9	217.48	*100	20	40	120	20	50	*130	25	60
44	230.0	222.53	*100	20	40	120	20	50	*130	25	60
45	235.0	227.58	*100	20	40	*120	20	50	*130	25	60
46	240.1	232.63	*100	20	40	*120	20	50	*130	25	60
47	245.1	237.68	*100	20	40	*120	20	50	*130	25	60
48	250.2	242.73	*100	20	40	*120	20	50	*130	25	60
49	255.2	247.78	*100	20	40	*120	20	50	*130	25	60
50	260.3	252.82	*100	20	40	*120	20	50	*130	25	60
51	265.3	257.87	*100	20	40	*120	20	50	*130	25	60
52	270.4	262.92	*100	20	40	*120	20	50	*130	25	60
53	275.4	267.97	*100	20	40	*120	20	50	*130	25	60
54	280.5	273.03	*100	20	40	*120	20	50	*130	25	60
55	285.5	278.08	*100	20	40	*120	20	50	*130	25	60
56	290.6	283.13	*100	20	40	*120	20	50	*130	25	60
57	296.0	288.18	*100	20	40	*120	20	50	*130	25	60
58	300.7	293.23	*100	20	43	*120	20	57	*130	25	64
59	305.7	298.28	*100	20	43	*120	20	57	*130	25	64
60	310.8	303.33	*100	20	43	*120	20	57	*130	25	64
62	321.4	313.43	*100	20	43	*120	20	57	*130	25	64
64	331.5	323.53	*100	20	43	*120	20	57	*130	25	67
65	336.5	328.58	*100	20	43	*120	20	57	*130	25	67
66	341.6	333.64	*100	20	43	*120	20	57	*130	25	67
68	351.7	343.74	*100	20	43	*120	20	57	*130	25	67
70	361.8	353.84	*100	20	43	*120	20	57	*130	25	67
72	371.9	363.94	*100	20	43	*120	20	57	*130	25	67
75	387.1	379.10	*100	20	43	*120	20	57	*130	25	67
76	392.1	384.15	*100	20	43	*120	20	57	*130	25	67
78	402.2	394.25	*100	20	43	*120	20	57	*130	25	67
80	412.3	404.36	*100	20	43	*130	20	57	*130	25	67
85	437.6	429.62	*100	20	50	*130	20	58	*130	25	67
90	462.8	454.88	*100	20	50	*130	20	58	*130	25	67
95	488.5	480.14	*100	20	50	*130	20	58	*130	25	67
100	513.4	505.40	*100	20	50	*130	20	58	*130	25	67
110	563.9	555.92	*100	20	50	*130	20	58	*130	25	67
114	584.1	576.13	*100	20	50	*130	20	58	*130	25	67
120	614.4	606.45	*100	20	50	*130	20	58	*130	25	67
125	639.7	631.51	*100	20	50	*130	20	58	*130	25	67

###

Product name	DIN ISO Standard Sprocket for Roller Chain
Materials Available	1. Stainless Steel: SS304, SS316, etc
	2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
	3. OEM according to your request
Surface Treatment	Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic	Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion	ISO DIN ANSI & Customer Drawings
Size	Customer Drawings & ISO standard
Application	Industrial transmission equipment
Package	Wooden Case / Container and pallet, or made-to-order
Certificate	ISO9001: 2008
Advantage	Quality first, Service first, Competitive price, Fast delivery
Delivery Time	20 days for samples. 45 days for official order.

###

Size	Pitch	Maximum Roller Diameter	Minimum Ultimate Tensile Strength	Measuring Load
ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
25	0.250 in (6.35 mm)	0.130 in (3.30 mm)	780 lb (350 kg)	18 lb (8.2 kg)
35	0.375 in (9.53 mm)	0.200 in (5.08 mm)	1,760 lb (800 kg)	18 lb (8.2 kg)
41	0.500 in (12.70 mm)	0.306 in (7.77 mm)	1,500 lb (680 kg)	18 lb (8.2 kg)
40	0.500 in (12.70 mm)	0.312 in (7.92 mm)	3,125 lb (1,417 kg)	31 lb (14 kg)
50	0.625 in (15.88 mm)	0.400 in (10.16 mm)	4,880 lb (2,210 kg)	49 lb (22 kg)
60	0.750 in (19.05 mm)	0.469 in (11.91 mm)	7,030 lb (3,190 kg)	70 lb (32 kg)
80	1.000 in (25.40 mm)	0.625 in (15.88 mm)	12,500 lb (5,700 kg)	125 lb (57 kg)
100	1.250 in (31.75 mm)	0.750 in (19.05 mm)	19,531 lb (8,859 kg)	195 lb (88 kg)
120	1.500 in (38.10 mm)	0.875 in (22.23 mm)	28,125 lb (12,757 kg)	281 lb (127 kg)
140	1.750 in (44.45 mm)	1.000 in (25.40 mm)	38,280 lb (17,360 kg)	383 lb (174 kg)
160	2.000 in (50.80 mm)	1.125 in (28.58 mm)	50,000 lb (23,000 kg)	500 lb (230 kg)
180	2.250 in (57.15 mm)	1.460 in (37.08 mm)	63,280 lb (28,700 kg)	633 lb (287 kg)
200	2.500 in (63.50 mm)	1.562 in (39.67 mm)	78,175 lb (35,460 kg)	781 lb (354 kg)
240	3.000 in (76.20 mm)	1.875 in (47.63 mm)	112,500 lb (51,000 kg)	1,000 lb (450 kg

###

Pitch (inches)	Pitch expressed in eighths	ANSI standard chain number	Width (inches)
¹⁄₄	²⁄₈	25	¹⁄₈
³⁄₈	³⁄₈	35	³⁄₁₆
¹⁄₂	⁴⁄₈	41	¹⁄₄
¹⁄₂	⁴⁄₈	40	⁵⁄₁₆
⁵⁄₈	⁵⁄₈	50	³⁄₈
³⁄₄	⁶⁄₈	60	¹⁄₂
1	⁸⁄₈	80	⁵⁄₈

Tips for Buying Roller Chains

There are several things to consider when buying a new roller chain. Chains can be heavy-duty roller chains or self-lubricating chains. These factors all affect the wear of the roller chain. Proper lubrication and adjustment are important to prolong the life of the chain. Here are tips for buying a new roller chain. Some common types of roller chains are listed below. The type you choose depends on its purpose.

Bushingless Roller Chains

The tensile strength of a bushingless roller chain is often the primary measure of its durability. It represents the maximum load a chain can withstand before breaking, but fatigue strength is just as important. Factors that affect fatigue strength include the steel used to manufacture the chain, the quality of the pitch holes, the type of shot peening used, and the thickness and design of the chainplates. Here are some tips on how to test the fatigue strength of bushless roller chains.
The inner link plate 130 is thicker than the outer link plate 120. This feature helps the connecting pins and rollers remain stable. This feature reduces wear and noise. It also improves the overall durability of the chain. Unlike traditional chains, bushingless roller chains are easier to maintain than comparable chains. They also reduce the risk of sprocket wear. Bushingless roller chains are ideal for demanding applications where noise is a concern.
Unlined roller chains are generally less expensive than lined roller chains. Bushings are integrated into the inner plate, while those in conventional chains are inserted into the outer plate. The result is lower cost and more flexible lateral movement – a requirement for modern derailleur gearing. But with all these advantages, choosing a linerless chain is still essential. You should read reviews about the durability of bushingless roller chains before buying.
In its simplest form, the connecting pin 140 is pressed into the pinhole 126 in the direction of chain travel. Connecting pins 140 extend through these holes to connect the inner link plate and the rollers. The connecting pins can also be welded to the outer link plates. During assembly, chain C can be efficiently assembled from one side in the engine width direction. If you have an older car, you can try the bushless version and see how it goes.
Another variation of bushless roller chains involves sprockets and connecting pins. The outer link plate has connecting pins extending through holes in the inner link plate. The rollers are able to rotate on the connecting pins, thus lubricating them. There are two types of bushingless roller chains: connecting pin chains and sprocket chains. These two types of bushingless roller chains are generally interchangeable.
Linerless roller chains can contain chain guides. During the riveting process, the outer and inner link plates compress against each other, reducing friction and power loss. ANSI Standard B29.1-2011 is designed to make it easier for you to choose the right chain for your vehicle. This version is also quieter, reducing noise. In addition to improved efficiency, bushingless roller chains offer better durability. It is easier to install and less expensive to maintain.
chain

Single Strand Heavy Duty Roller Chain

Single Strand Heavy Duty Roller Chains, also known as Single Strand Heavy Duty Roller Chains, are available in a variety of sizes. These chains run on standard roller sprockets and have thicker side plates. These increase their tensile strength, fatigue rating and overall working life. Monostrand chains are available in three quality levels: riveted, open and closed.
If your chain needs to be replaced, your best bet is to buy replacement parts. Single strand roller chains are usually ten feet long. For larger sizes, consider purchasing a single-strand heavy-duty roller chain that is three times longer. This way, you don’t have to worry about damaging your machine. Oregon roller chains are manufactured to OEM standards.
CZPT Plus Heavy Duty Roller Chains feature solid rollers for light to medium duty applications. It meets ANSI B29.1 durability standards and is ideal for light to medium duty applications. CZPT Plus Heavy Duty Roller Chains have solid bushings in selected sizes to ANSI B29.1. CZPT Plus heavy duty roller chains are supplied with ample lubricant. If your application requires heavy duty roller chains, you can find them at CZPT Chain and Sprockets.
In addition to single-strand heavy-duty roller chains, there are three-strand heavy-duty roller chains. These chains can withstand enormous pressure and are ideal for applications in agriculture, sewage treatment, machinery, and more. They are designed to last for years without breaking. So whether you’re looking for a heavy duty roller chain for your farm equipment or construction, American Roller Chain has you covered.
In order to choose the right size for your needs, you must first determine the diameter and overall width of the roller chain. You also have to measure the width of the drum itself. This information will determine how many chains you need to order. The measurement and selection of dimensions will determine the cost of your new roller chain. Buying the right roller chain is simple and convenient if you understand all of these factors. So use a caliper and make sure the roller chain is measured correctly.
The size of a single strand heavy duty roller chain is critical to the stability of your business. You can save a lot of money by buying a high-quality roller chain. Just make sure to store it properly. Its shelf life is virtually unlimited. When properly stored, a single-strand heavy duty roller chain can improve the stability of your business for years to come. A single-strand chain is an affordable investment that will pay dividends for your business.
chain

Self-lubricating roller chain

Self-lubricating roller chains can be used in a variety of applications. This type of chain is an excellent choice for areas that cannot be manually lubricated. It also reduces the risk of contamination as no lubricant is required at all. Self-lubricating roller chains are available in a variety of designs and are compatible with a wide variety of food applications. If you’re interested in learning more about such chains, keep reading!
There are two main types of chains of this type: DIN ISO 606 and DIN 8187. They are similar in construction to traditional chains, but are more durable. They have higher friction and wear resistance than traditional roller chains. These chains are also very effective in applications that require a lot of moisture and water flushing. They require less maintenance and can last a long time. Another benefit of self-lubricating chains is that they last longer than regular roller chains, which can be quite expensive.
Another self-lubricating roller chain is the non-lubricating type. These chains are internally lubricated and isolated from the external environment. Ideal for low to high load applications, these chains will last 5 to 20 times longer than comparable initially lubricated roller chains. Self-lubricating roller chains have so many advantages, you’ll be glad you bought one.